Export limit exceeded: 380706 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (380706 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-35191 | 2026-04-15 | 6.8 Medium | ||
| Uncontrolled resource consumption for some Intel(R) SPS firmware versions may allow a privileged user to potentially enable denial of service via network access. | ||||
| CVE-2023-54144 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kernel warning during topology setup This patch fixes the following kernel warning seen during driver load by correctly initializing the p2plink attr before creating the sysfs file: [ +0.002865] ------------[ cut here ]------------ [ +0.002327] kobject: '(null)' (0000000056260cfb): is not initialized, yet kobject_put() is being called. [ +0.004780] WARNING: CPU: 32 PID: 1006 at lib/kobject.c:718 kobject_put+0xaa/0x1c0 [ +0.001361] Call Trace: [ +0.001234] <TASK> [ +0.001067] kfd_remove_sysfs_node_entry+0x24a/0x2d0 [amdgpu] [ +0.003147] kfd_topology_update_sysfs+0x3d/0x750 [amdgpu] [ +0.002890] kfd_topology_add_device+0xbd7/0xc70 [amdgpu] [ +0.002844] ? lock_release+0x13c/0x2e0 [ +0.001936] ? smu_cmn_send_smc_msg_with_param+0x1e8/0x2d0 [amdgpu] [ +0.003313] ? amdgpu_dpm_get_mclk+0x54/0x60 [amdgpu] [ +0.002703] kgd2kfd_device_init.cold+0x39f/0x4ed [amdgpu] [ +0.002930] amdgpu_amdkfd_device_init+0x13d/0x1f0 [amdgpu] [ +0.002944] amdgpu_device_init.cold+0x1464/0x17b4 [amdgpu] [ +0.002970] ? pci_bus_read_config_word+0x43/0x80 [ +0.002380] amdgpu_driver_load_kms+0x15/0x100 [amdgpu] [ +0.002744] amdgpu_pci_probe+0x147/0x370 [amdgpu] [ +0.002522] local_pci_probe+0x40/0x80 [ +0.001896] work_for_cpu_fn+0x10/0x20 [ +0.001892] process_one_work+0x26e/0x5a0 [ +0.002029] worker_thread+0x1fd/0x3e0 [ +0.001890] ? process_one_work+0x5a0/0x5a0 [ +0.002115] kthread+0xea/0x110 [ +0.001618] ? kthread_complete_and_exit+0x20/0x20 [ +0.002422] ret_from_fork+0x1f/0x30 [ +0.001808] </TASK> [ +0.001103] irq event stamp: 59837 [ +0.001718] hardirqs last enabled at (59849): [<ffffffffb30fab12>] __up_console_sem+0x52/0x60 [ +0.004414] hardirqs last disabled at (59860): [<ffffffffb30faaf7>] __up_console_sem+0x37/0x60 [ +0.004414] softirqs last enabled at (59654): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130 [ +0.004205] softirqs last disabled at (59649): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130 [ +0.004203] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-7074 | 2026-04-15 | 6.8 Medium | ||
| An arbitrary file upload vulnerability exists in multiple WSO2 products due to improper validation of user input in SOAP admin services. A malicious actor with administrative privileges can upload an arbitrary file to a user-controlled location on the server. By leveraging this vulnerability, an attacker could upload a specially crafted payload, potentially achieving remote code execution (RCE) on the server. Exploitation requires valid admin credentials, limiting its impact to authorized but potentially malicious users. | ||||
| CVE-2023-3597 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2026-04-15 | 5 Medium |
| A flaw was found in Keycloak, where it does not correctly validate its client step-up authentication in org.keycloak.authentication. This flaw allows a remote user authenticated with a password to register a false second authentication factor along with an existing one and bypass authentication. | ||||
| CVE-2023-54152 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: prevent deadlock by moving j1939_sk_errqueue() This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. | ||||
| CVE-2023-3675 | 1 Secomea | 1 Gatemanager | 2026-04-15 | 6.5 Medium |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Secomea GateManager (Web GUI) allows Reading Data from System Resources.This issue affects GateManager: from 11.0.623074018 before 11.0.623373051. | ||||
| CVE-2023-54154 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix target_cmd_counter leak The target_cmd_counter struct allocated via target_alloc_cmd_counter() is never freed, resulting in leaks across various transport types, e.g.: unreferenced object 0xffff88801f920120 (size 96): comm "sh", pid 102, jiffies 4294892535 (age 713.412s) hex dump (first 32 bytes): 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8....... backtrace: [<00000000e58a6252>] kmalloc_trace+0x11/0x20 [<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod] [<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod] [<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop] [<000000006a80e021>] configfs_write_iter+0xb1/0x120 [<00000000e9f4d860>] vfs_write+0x2e4/0x3c0 [<000000008143433b>] ksys_write+0x80/0xb0 [<00000000a7df29b2>] do_syscall_64+0x42/0x90 [<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Free the structure alongside the corresponding iscsit_conn / se_sess parent. | ||||
| CVE-2023-54158 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't free qgroup space unless specified Boris noticed in his simple quotas testing that he was getting a leak with Sweet Tea's change to subvol create that stopped doing a transaction commit. This was just a side effect of that change. In the delayed inode code we have an optimization that will free extra reservations if we think we can pack a dir item into an already modified leaf. Previously this wouldn't be triggered in the subvolume create case because we'd commit the transaction, it was still possible but much harder to trigger. It could actually be triggered if we did a mkdir && subvol create with qgroups enabled. This occurs because in btrfs_insert_delayed_dir_index(), which gets called when we're adding the dir item, we do the following: btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); if we're able to skip reserving space. The problem here is that trans->block_rsv points at the temporary block rsv for the subvolume create, which has qgroup reservations in the block rsv. This is a problem because btrfs_block_rsv_release() will do the following: if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { qgroup_to_release = block_rsv->qgroup_rsv_reserved - block_rsv->qgroup_rsv_size; block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size; } The temporary block rsv just has ->qgroup_rsv_reserved set, ->qgroup_rsv_size == 0. The optimization in btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then later on when we call btrfs_subvolume_release_metadata() which has btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release); btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release); qgroup_to_release is set to 0, and we do not convert the reserved metadata space. The problem here is that the block rsv code has been unconditionally messing with ->qgroup_rsv_reserved, because the main place this is used is delalloc, and any time we call btrfs_block_rsv_release() we do it with qgroup_to_release set, and thus do the proper accounting. The subvolume code is the only other code that uses the qgroup reservation stuff, but it's intermingled with the above optimization, and thus was getting its reservation freed out from underneath it and thus leaking the reserved space. The solution is to simply not mess with the qgroup reservations if we don't have qgroup_to_release set. This works with the existing code as anything that messes with the delalloc reservations always have qgroup_to_release set. This fixes the leak that Boris was observing. | ||||
| CVE-2023-54155 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail() Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87 ("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the xdp_init_buff() which all XDP driver use - it's safe to remove this check. The original intend was to catch cases where XDP drivers have not been updated to use xdp.frame_sz, but that is not longer a concern (since xdp_init_buff). Running the initial syzkaller repro it was discovered that the contiguous physical memory allocation is used for both xdp paths in tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can work on higher order pages, as long as this is contiguous physical memory (e.g. a page). | ||||
| CVE-2022-50704 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: Fix use-after-free during usb config switch In the process of switching USB config from rndis to other config, if the hardware does not support the ->pullup callback, or the hardware encounters a low probability fault, both of them may cause the ->pullup callback to fail, which will then cause a system panic (use after free). The gadget drivers sometimes need to be unloaded regardless of the hardware's behavior. Analysis as follows: ======================================================================= (1) write /config/usb_gadget/g1/UDC "none" gether_disconnect+0x2c/0x1f8 rndis_disable+0x4c/0x74 composite_disconnect+0x74/0xb0 configfs_composite_disconnect+0x60/0x7c usb_gadget_disconnect+0x70/0x124 usb_gadget_unregister_driver+0xc8/0x1d8 gadget_dev_desc_UDC_store+0xec/0x1e4 (2) rm /config/usb_gadget/g1/configs/b.1/f1 rndis_deregister+0x28/0x54 rndis_free+0x44/0x7c usb_put_function+0x14/0x1c config_usb_cfg_unlink+0xc4/0xe0 configfs_unlink+0x124/0x1c8 vfs_unlink+0x114/0x1dc (3) rmdir /config/usb_gadget/g1/functions/rndis.gs4 panic+0x1fc/0x3d0 do_page_fault+0xa8/0x46c do_mem_abort+0x3c/0xac el1_sync_handler+0x40/0x78 0xffffff801138f880 rndis_close+0x28/0x34 eth_stop+0x74/0x110 dev_close_many+0x48/0x194 rollback_registered_many+0x118/0x814 unregister_netdev+0x20/0x30 gether_cleanup+0x1c/0x38 rndis_attr_release+0xc/0x14 kref_put+0x74/0xb8 configfs_rmdir+0x314/0x374 If gadget->ops->pullup() return an error, function rndis_close() will be called, then it will causes a use-after-free problem. ======================================================================= | ||||
| CVE-2022-50703 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() There are two refcount leak bugs in qcom_smsm_probe(): (1) The 'local_node' is escaped out from for_each_child_of_node() as the break of iteration, we should call of_node_put() for it in error path or when it is not used anymore. (2) The 'node' is escaped out from for_each_available_child_of_node() as the 'goto', we should call of_node_put() for it in goto target. | ||||
| CVE-2022-50702 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init() Inject fault while probing module, if device_register() fails in vdpasim_net_init() or vdpasim_blk_init(), but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). (vdpa_sim_net) unreferenced object 0xffff88807eebc370 (size 16): comm "modprobe", pid 3848, jiffies 4362982860 (age 18.153s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 6e 65 74 00 6b 6b 6b a5 vdpasim_net.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0270013>] 0xffffffffa0270013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 (vdpa_sim_blk) unreferenced object 0xffff8881070c1250 (size 16): comm "modprobe", pid 6844, jiffies 4364069319 (age 17.572s) hex dump (first 16 bytes): 76 64 70 61 73 69 6d 5f 62 6c 6b 00 6b 6b 6b a5 vdpasim_blk.kkk. backtrace: [<ffffffff8174f19e>] __kmalloc_node_track_caller+0x4e/0x150 [<ffffffff81731d53>] kstrdup+0x33/0x60 [<ffffffff83a5d421>] kobject_set_name_vargs+0x41/0x110 [<ffffffff82d87aab>] dev_set_name+0xab/0xe0 [<ffffffff82d91a23>] device_add+0xe3/0x1a80 [<ffffffffa0220013>] 0xffffffffa0220013 [<ffffffff81001c27>] do_one_initcall+0x87/0x2e0 [<ffffffff813739cb>] do_init_module+0x1ab/0x640 [<ffffffff81379d20>] load_module+0x5d00/0x77f0 [<ffffffff8137bc40>] __do_sys_finit_module+0x110/0x1b0 [<ffffffff83c4d505>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2022-50699 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context() The following warning was triggered on a hardware environment: SELinux: Converting 162 SID table entries... BUG: sleeping function called from invalid context at __might_sleep+0x60/0x74 0x0 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1 Call trace: dump_backtrace+0x0/0x1c8 show_stack+0x18/0x28 dump_stack+0xe8/0x15c ___might_sleep+0x168/0x17c __might_sleep+0x60/0x74 __kmalloc_track_caller+0xa0/0x7dc kstrdup+0x54/0xac convert_context+0x48/0x2e4 sidtab_context_to_sid+0x1c4/0x36c security_context_to_sid_core+0x168/0x238 security_context_to_sid_default+0x14/0x24 inode_doinit_use_xattr+0x164/0x1e4 inode_doinit_with_dentry+0x1c0/0x488 selinux_d_instantiate+0x20/0x34 security_d_instantiate+0x70/0xbc d_splice_alias+0x4c/0x3c0 ext4_lookup+0x1d8/0x200 [ext4] __lookup_slow+0x12c/0x1e4 walk_component+0x100/0x200 path_lookupat+0x88/0x118 filename_lookup+0x98/0x130 user_path_at_empty+0x48/0x60 vfs_statx+0x84/0x140 vfs_fstatat+0x20/0x30 __se_sys_newfstatat+0x30/0x74 __arm64_sys_newfstatat+0x1c/0x2c el0_svc_common.constprop.0+0x100/0x184 do_el0_svc+0x1c/0x2c el0_svc+0x20/0x34 el0_sync_handler+0x80/0x17c el0_sync+0x13c/0x140 SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is not valid (left unmapped). It was found that within a critical section of spin_lock_irqsave in sidtab_context_to_sid(), convert_context() (hooked by sidtab_convert_params.func) might cause the process to sleep via allocating memory with GFP_KERNEL, which is problematic. As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL. Therefore, fix this problem by adding a gfp_t argument for convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC properly in individual callers. [PM: wrap long BUG() output lines, tweak subject line] | ||||
| CVE-2022-50698 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: da7219: Fix an error handling path in da7219_register_dai_clks() If clk_hw_register() fails, the corresponding clk should not be unregistered. To handle errors from loops, clean up partial iterations before doing the goto. So add a clk_hw_unregister(). Then use a while (--i >= 0) loop in the unwind section. | ||||
| CVE-2022-45070 | 2026-04-15 | 5.3 Medium | ||
| Missing Authorization vulnerability in FmeAddons Conditional Checkout Fields for WooCommerce.This issue affects Conditional Checkout Fields for WooCommerce: from n/a through 1.2.3. | ||||
| CVE-2025-0424 | 2026-04-15 | N/A | ||
| In the "bestinformed Web" application, some user input was not properly sanitized. This leads to multiple authenticated stored cross-site scripting vulnerabilities. An authenticated attacker is able to compromise the sessions of other users on the server by injecting JavaScript code into their session using an "Authenticated Stored Cross-Site Scripting". Those other users might have more privileges than the attacker, enabling a form of horizontal movement. | ||||
| CVE-2025-0423 | 2026-04-15 | N/A | ||
| In the "bestinformed Web" application, some user input was not properly sanitized. This leads to multiple unauthenticated stored cross-site scripting vulnerabilities. An unauthenticated attacker is able to compromise the sessions of users on the server by injecting JavaScript code into their session using an "Unauthenticated Stored Cross-Site Scripting". The attacker is then able to ride the session of those users and can abuse their privileges on the "bestinformed Web" application. | ||||
| CVE-2024-9834 | 1 Baxter | 1 Life2000 Ventilator Firmware | 2026-04-15 | 9.3 Critical |
| Improper data protection on the ventilator's serial interface could allow an attacker to send and receive messages that result in unauthorized disclosure of information and/or have unintended impacts on device settings and performance. | ||||
| CVE-2024-9832 | 1 Baxter | 1 Life2000 Ventilator Firmware | 2026-04-15 | 9.3 Critical |
| There is no limit on the number of failed login attempts permitted with the Clinician Password or the Serial Number Clinician Password. An attacker could execute a brute-force attack to gain unauthorized access to the ventilator, and then make changes to device settings that could disrupt the function of the device and/or result in unauthorized information disclosure. | ||||
| CVE-2024-47516 | 1 Redhat | 1 Pagure | 2026-04-15 | 9.8 Critical |
| A vulnerability was found in Pagure. An argument injection in Git during retrieval of the repository history leads to remote code execution on the Pagure instance. | ||||