Export limit exceeded: 380706 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (380706 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-8512 | 1 Tvb | 1 Big Big Shop App | 2026-04-15 | 5.3 Medium |
| A vulnerability, which was classified as problematic, has been found in TVB Big Big Shop App 2.9.0 on Android. This issue affects some unknown processing of the file AndroidManifest.xml of the component hk.com.tvb.bigbigshop. The manipulation leads to improper export of android application components. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-46806 | 2026-04-15 | N/A | ||
| A Use of Out-of-range Pointer Offset vulnerability in sslh leads to denial of service on some architectures.This issue affects sslh before 2.2.4. | ||||
| CVE-2025-4692 | 2026-04-15 | 6.8 Medium | ||
| Actors can use a maliciously crafted JavaScript object notation (JSON) web token (JWT) to perform privilege escalation by submitting the malicious JWT to a vulnerable method exposed on the cloud platform. If the exploit is successful, the user can escalate privileges to access any device managed by the ABUP Cloud Update Platform. | ||||
| CVE-2025-59890 | 1 Eaton | 1 Galileo Software | 2026-04-15 | 7.3 High |
| Improper input sanitization in the file archives upload functionality of Eaton Galileo software allows traversing paths which could lead into an attacker with local access to execute unauthorized code or commands. This security issue has been fixed in the latest version of Galileo which is available on the Eaton download center. | ||||
| CVE-2023-38290 | 2 Bluview, Sharp | 2 Bluview, Rouvo V | 2026-04-15 | 7.8 High |
| Certain software builds for the BLU View 2 and Sharp Rouvo V Android devices contain a vulnerable pre-installed app with a package name of com.evenwell.fqc (versionCode='9020801', versionName='9.0208.01' ; versionCode='9020913', versionName='9.0209.13' ; versionCode='9021203', versionName='9.0212.03') that allows local third-party apps to execute arbitrary shell commands in its context (system user) due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.evenwell.fqc app. No user interaction is required beyond installing and running a third-party app. The vulnerability allows local apps to access sensitive functionality that is generally restricted to pre-installed apps, such as programmatically performing the following actions: granting arbitrary permissions (which can be used to obtain sensitive user data), installing arbitrary apps, video recording the screen, wiping the device (removing the user's apps and data), injecting arbitrary input events, calling emergency phone numbers, disabling apps, accessing notifications, and much more. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1663816427:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1656476696:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1647856638:user/release-keys) and Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_460:user/release-keys and SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys). This malicious app starts an exported activity named com.evenwell.fqc/.activity.ClickTest, crashes the com.evenwell.fqc app by sending an empty Intent (i.e., having not extras) to the com.evenwell.fqc/.FQCBroadcastReceiver receiver component, and then it sends command arbitrary shell commands to the com.evenwell.fqc/.FQCService service component which executes them with "system" privileges. | ||||
| CVE-2023-38294 | 2026-04-15 | 6.1 Medium | ||
| Certain software builds for the Itel Vision 3 Turbo Android device contain a vulnerable pre-installed app with a package name of com.transsion.autotest.factory (versionCode='7', versionName='1.8.0(220310_1027)') that allows local third-party apps to execute arbitrary shell commands in its context (system user) due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.transsion.autotest.factory app. No user interaction is required beyond installing and running a third-party app. The vulnerability allows local apps to access sensitive functionality that is generally restricted to pre-installed apps, such as programmatically performing the following actions: granting arbitrary permissions (which can be used to obtain sensitive user data), installing arbitrary apps, video recording the screen, wiping the device (removing the user's apps and data), injecting arbitrary input events, calling emergency phone numbers, disabling apps, accessing notifications, and much more. The confirmed vulnerable software build fingerprints for the Itel Vision 3 Turbo device are as follows: Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V92-20230105:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V86-20221118:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V78-20221101:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V64-20220803:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V61-20220721:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V58-20220712:user/release-keys, and Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V051-20220613:user/release-keys. This malicious app sends a broadcast Intent to the receiver component named com.transsion.autotest.factory/.broadcast.CommandReceiver with the path to a shell script that it creates in its scoped storage directory. Then the com.transsion.autotest.factory app will execute the shell script with "system" privileges. | ||||
| CVE-2024-6351 | 2026-04-15 | 4.3 Medium | ||
| A malformed packet can cause a buffer overflow in the NWK/APS layer of the Ember ZNet stack and lead to an assert | ||||
| CVE-2023-38300 | 1 Orbic | 1 Maui | 2026-04-15 | 6.2 Medium |
| A certain software build for the Orbic Maui device (Orbic/RC545L/RC545L:10/ORB545L_V1.4.2_BVZPP/230106:user/release-keys) leaks the IMEI and the ICCID to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the "persist.sys.verizon_test_plan_imei" system property to indirectly obtain the IMEI and reads the "persist.sys.verizon_test_plan_iccid" system property to obtain the ICCID. | ||||
| CVE-2025-24371 | 1 Cometbft | 1 Cometbft | 2026-04-15 | N/A |
| CometBFT is a distributed, Byzantine fault-tolerant, deterministic state machine replication engine. In the `blocksync` protocol peers send their `base` and `latest` heights when they connect to a new node (`A`), which is syncing to the tip of a network. `base` acts as a lower ground and informs `A` that the peer only has blocks starting from height `base`. `latest` height informs `A` about the latest block in a network. Normally, nodes would only report increasing heights. If `B` fails to provide the latest block, `B` is removed and the `latest` height (target height) is recalculated based on other nodes `latest` heights. The existing code however doesn't check for the case where `B` first reports `latest` height `X` and immediately after height `Y`, where `X > Y`. `A` will be trying to catch up to 2000 indefinitely. This condition requires the introduction of malicious code in the full node first reporting some non-existing `latest` height, then reporting lower `latest` height and nodes which are syncing using `blocksync` protocol. This issue has been patched in versions 1.0.1 and 0.38.17 and all users are advised to upgrade. Operators may attempt to ban malicious peers from the network as a workaround. | ||||
| CVE-2025-48061 | 2026-04-15 | 5.6 Medium | ||
| wire-webapp is the web application for the open-source messaging service Wire. A change caused a regression resulting in sessions not being properly invalidated. A user that logged out of the Wire webapp, could have been automatically logged in again after re-opening the application. This does not happen when the user is logged in as a temporary user by selecting "This is a public computer" during login or the user selects "Delete all your personal information and conversations on this device" upon logout. The underlying issue has been fixed with wire-webapp version 2025-05-20-production.0. As a workaround, this behavior can be prevented by either deleting all information upon logout as well as logging in as a temporary client. | ||||
| CVE-2024-7141 | 2026-04-15 | N/A | ||
| Versions of Gliffy Online prior to versions 4.14.0-7 contains a Cross Site Request Forgery (CSRF) flaw. | ||||
| CVE-2024-8860 | 2 Themefic, Wordpress | 2 Tourfic, Wordpress | 2026-04-15 | 4.3 Medium |
| The Tourfic plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the tf_order_status_email_resend_function, tf_visitor_details_edit_function, tf_checkinout_details_edit_function, tf_order_status_edit_function, tf_order_bulk_action_edit_function, tf_remove_room_order_ids, and tf_delete_old_review_fields functions in all versions up to, and including, 2.14.5. This makes it possible for authenticated attackers, with subscriber-level access and above, to resend order status emails, update visitor/order details, edit check-in/out details, edit order status, perform bulk order status updates, remove room order IDs, and delete old review fields, respectively. | ||||
| CVE-2025-48374 | 2026-04-15 | N/A | ||
| zot is ancontainer image/artifact registry based on the Open Container Initiative Distribution Specification. Prior to version 2.1.3 (corresponding to pseudoversion 1.4.4-0.20250522160828-8a99a3ed231f), when using Keycloak as an oidc provider, the clientsecret gets printed into the container stdout logs for an example at container startup. Version 2.1.3 (corresponding to pseudoversion 1.4.4-0.20250522160828-8a99a3ed231f) fixes the issue. | ||||
| CVE-2024-8873 | 2026-04-15 | 6.1 Medium | ||
| The PeproDev WooCommerce Receipt Uploader plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 2.6.9. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. CVE-2025-24574 is likely a duplicate of this issue. | ||||
| CVE-2024-8874 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 6.1 Medium |
| The AJAX Login and Registration modal popup + inline form plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 2.24. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | ||||
| CVE-2025-24898 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 4.8 Medium |
| rust-openssl is a set of OpenSSL bindings for the Rust programming language. In affected versions `ssl::select_next_proto` can return a slice pointing into the `server` argument's buffer but with a lifetime bound to the `client` argument. In situations where the `sever` buffer's lifetime is shorter than the `client` buffer's, this can cause a use after free. This could cause the server to crash or to return arbitrary memory contents to the client. The crate`openssl` version 0.10.70 fixes the signature of `ssl::select_next_proto` to properly constrain the output buffer's lifetime to that of both input buffers. Users are advised to upgrade. In standard usage of `ssl::select_next_proto` in the callback passed to `SslContextBuilder::set_alpn_select_callback`, code is only affected if the `server` buffer is constructed *within* the callback. | ||||
| CVE-2025-48955 | 1 Erudika | 1 Para | 2026-04-15 | 6.2 Medium |
| Para is a multitenant backend server/framework for object persistence and retrieval. A vulnerability that exists in versions prior to 1.50.8 exposes both access and secret keys in logs without redaction. These credentials are later reused in variable assignments for persistence but do not require logging for debugging or system health purposes. Version 1.50.8 fixes the issue. | ||||
| CVE-2024-9116 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 6.4 Medium |
| The Monkee-Boy Essentials plugin for WordPress is vulnerable to Stored Cross-Site Scripting via SVG File uploads in all versions up to, and including, 1.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file. | ||||
| CVE-2025-49164 | 2026-04-15 | 4.3 Medium | ||
| Arris VIP1113 devices through 2025-05-30 with KreaTV SDK have a firmware decryption key of cd1c2d78f2cba1f73ca7e697b4a485f49a8a7d0c8b0fdc9f51ced50f2530668a. | ||||
| CVE-2025-49574 | 1 Quarkus | 1 Quarkus | 2026-04-15 | 6.4 Medium |
| Quarkus is a Cloud Native, (Linux) Container First framework for writing Java applications. In versions prior to 3.24.1, 3.20.2, and 3.15.6, there is a potential data leak when duplicating a duplicated context. Quarkus extensively uses the Vert.x duplicated context to implement context propagation. With the new semantic data from one transaction can leak to the data from another transaction. From a Vert.x point of view, this new semantic clarifies the behavior. A significant amount of data is stored in the duplicated context, including request scope, security details, and metadata. Duplicating a duplicated context is rather rare and is only done in a few places. This issue has been patched in version 3.24.1, 3.20.2, and 3.15.6. | ||||