Export limit exceeded: 85990 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (85990 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74487 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: restore write access when removing an entry Registering an entry with the MISC_FMT_OPEN_FILE flag opens the interpreter via open_exec() which denies write access to it for as long as the entry exists. Removing the entry closes the interpreter file via filp_close() but never restores write access, leaving the inode's i_writecount permanently negative. Opening the interpreter for writing keeps failing with ETXTBSY long after the entry is gone until the inode is evicted from the inode cache. Commit 90f601b497d7 ("binfmt_misc: restore write access before closing files opened by open_exec()") fixed the same imbalance in the error path of bm_register_write() but the actual removal path has been leaking the write denial since the introduction of the flag. Restore write access in put_binfmt_handler() before closing the interpreter file. | ||||
| CVE-2026-74420 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page objects, which GPUSVM requires in order to operate correctly. In particular, get_pages() relies on hmm_range_fault() to resolve struct pages for the target range. Attempting to create an SVM range on such VMAs results in repeated get_pages() failures and can lead to an infinite loop inside a driver’s page‑fault handler. Prevent this by rejecting ranges on VM_IO or VM_PFNMAP VMAs and returning -EIO. | ||||
| CVE-2026-74353 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: always resume_all after suspend_all Need to restore any good queues even if the suspend_all failed for some. Always run remove_queue as that will schedule a GPU reset is removing the queue fails. v2: move resume_all after remove | ||||
| CVE-2026-19474 | 2026-08-15 | 7.5 High | ||
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. | ||||
| CVE-2026-19895 | 1 Opensourcepos | 1 Open Source Point Of Sale | 2026-08-15 | 3.7 Low |
| A vulnerability was detected in opensourcepos Open Source Point of Sale up to 3.4.2. This affects the function Login::index of the file app/Config/Filters.php of the component Login Endpoint. The manipulation results in improper restriction of excessive authentication attempts. The attack may be launched remotely. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-74382 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: prevent unbounded recursion in offload rollback Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd(). Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then swaps prog/oldprog and recursively calls itself to roll back. But bpf_tc_accept=0 makes the rollback fail too, which triggers yet another rollback frame with the same arguments, and so on until the stack is exhausted. bpf_tc_accept is just a convenient knob for the reproducer. Any driver whose tc_setup_cb_replace() fails twice in a row can hit the same loop, so this is not a netdevsim-only issue. Two ways to fix it: 1) Have the rollback call tc_setup_cb_add() on oldprog instead of re-entering cls_bpf_offload_cmd(). 2) Mark the rollback frame with a flag and skip a second-level rollback from inside it. Go with (2). It is the smaller change and keeps the original behaviour: the rollback still goes through tc_setup_cb_replace(), so the driver gets one real chance to restore its state. If that attempt also fails, we just return the original error instead of recursing. [1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u | ||||
| CVE-2026-74319 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix deadlock waiting for ticket during data relocation When performing data relocation on a zoned filesystem, BTRFS can deadlock in handle_reserve_tickets(). The relocation process is waiting on a space reservation ticket that can never be fulfilled, because the relocation itself is the operation responsible for freeing up that space. Fix this by introducing a new flush state, BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk allocation during zoned relocation. Like BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses priority_reclaim_data_space() instead of the normal flushing path, which avoids re-entering the relocation code and breaking the deadlock cycle. In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the inode belongs to a data relocation root on a zoned filesystem. | ||||
| CVE-2026-74271 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | ||||
| CVE-2026-74276 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: xilinx: use FIFO occupancy register to determine buffer size The method the driver uses to determine the size of the FIFO has a problem. What it currently does is this: It stops the SPI hardware and writes to the TX FIFO register until TX FIFO FULL asserts in the status register. But the hardware does not only have the FIFO, it also has a shift register which can hold a byte. This can be seen, when writing a byte to the FIFO (while the SPI hardware is stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size of 16 for example, the current method returns a 17. This is a problem, at least when using the driver in irq mode. The same size determined for the TX FIFO is also assumed for the RX FIFO. When a SPI transaction wants to write the amount of the FIFO size or more bytes, the following happens, for example with 16 bytes FIFO size: The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and starts the SPI hardware and goes sleep. The hardware then shifts out 17 bytes (FIFO + shift register) and simultaneously reads bytes into the RX FIFO, but it only has 16 places, so it looses one byte. Then TX FIFO empty asserts, wakes the driver again, which has a fast path and reads 16 bytes from the RX FIFO, but before reading the last 17th byte (which is lost) it does this: sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); if (!(sr & XSPI_SR_RX_EMPTY_MASK)) { xilinx_spi_rx(xspi); rx_words--; } It reads the status register and checks if the RX FIFO is not empty. But it is empty in our case. So this check spins in a while loop forever locking the driver. This patch fixes the logic to determine the FIFO size. | ||||
| CVE-2026-74291 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Check PCM and DAI name strings before use Topology objects store several PCM and DAI names in fixed-size UAPI arrays. Other topology parser paths validate these fields with bounded strnlen() checks before using them as C strings, but the PCM and DAI paths still pass some fixed-size arrays directly to strlen(), devm_kstrdup(), DAI lookup, and diagnostic prints. A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream capability name can therefore make the parser read past the end of the fixed-size field. Reject unterminated PCM and DAI name fields before consuming them as C strings. | ||||
| CVE-2026-74308 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix kernel BUG in ext4_write_inline_data_end When the data=journal mount option is used, the ext4_journalled_write_end() function incorrectly calls ext4_write_inline_data_end() without checking if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode. If a previous attempt to convert the inline data to an extent failed (e.g. due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next call to ext4_write_begin() will not prepare the inline data xattr for writing, but ext4_journalled_write_end() will incorrectly attempt to write to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in ext4_write_inline_data() since i_inline_size was not expanded. Fix this by ensuring that ext4_journalled_write_end() only calls ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). | ||||
| CVE-2026-19894 | 1 Itsourcecode | 1 Hospital Management System | 2026-08-15 | 6.3 Medium |
| A security flaw has been discovered in itsourcecode Hospital Management System 1.0. Affected is an unknown function of the file /viewmedicine.php. Performing a manipulation of the argument delid results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-73194 | 2026-08-15 | N/A | ||
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write via an unvalidated numeric placeholder that sets the binder counter in preparse. preparse reserves seven output bytes per input byte, the width of the longest ':p99999' expansion. The ':N' branch parses the number with `atoi(src)` and assigns it to the binder counter with no range check, so a statement containing ':2147483648' leaves the counter negative (-2147483648 with glibc, where atoi wraps). Each following '?' then expands through `sprintf(start, ":p%d", idx++)` to ':p-2147483648', 14 bytes with the terminating NUL where the buffer budgets 7. The placeholder limit added in 1.650 tests the counter against 99,999, which a negative counter passes. Any caller that preparses an untrusted statement into ':pN' style placeholders gets a heap out-of-bounds write that grows with the number of '?' marks following the poisoned placeholder. The '?' and '%s' return styles compare the parsed number against the expected sequence and error out, and are unaffected. | ||||
| CVE-2026-73193 | 2026-08-15 | N/A | ||
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write on 32-bit perl via an integer wraparound in the output buffer size computed by preparse. preparse reserves its output buffer with `newSV(strlen(statement) * 7 + 16)`, budgeting seven output bytes per input byte for the longest ':p99999' expansion. The product is computed in STRLEN, which is 32 bits wide on a 32-bit perl build, so a statement of 613,566,757 bytes multiplies to 4,294,967,299, wraps modulo 2^32 to 3, and reserves 19 bytes. The parser then copies the statement out through a raw pointer with no capacity check, writing the whole 585 MB input past the end of the allocation. The 99,999 placeholder limit does not bound this path, which is reached by ordinary non-placeholder content. Any caller that passes an untrusted statement of that length to preparse on a 32-bit perl gets a heap out-of-bounds write of attacker controlled bytes. Builds with a 64-bit STRLEN are not affected, since the wrap there needs a statement of about 2.3 exabytes. | ||||
| CVE-2026-72308 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_port_lag_join() When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join() returns an error without releasing the lag reference obtained by the earlier mlxsw_sp_lag_get(). All other error paths in the function jump to the cleanup label that ends with mlxsw_sp_lag_put(), so this is a single missed release. Fix the leak by replacing the bare 'return err' with a goto to the existing error cleanup label, which will drop the reference safely. | ||||
| CVE-2026-72260 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Check runtime resume during probe The MT8192 AFE probe enables runtime PM temporarily while reinitializing the regmap cache from hardware, but it uses pm_runtime_get_sync() without checking the return value. If runtime resume fails, probe keeps going without the device necessarily being accessible, and pm_runtime_get_sync() may leave the PM usage count incremented. The regmap_reinit_cache() failure path also returns before dropping the temporary PM reference and before clearing pm_runtime_bypass_reg_ctl. Use pm_runtime_resume_and_get() so resume failures do not leak a usage count, and clear the temporary bypass flag after dropping the probe PM reference on all regmap_reinit_cache() outcomes. | ||||
| CVE-2026-72152 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat() wait_event_interruptible_timeout() evaluates its condition after setting the current task state to TASK_INTERRUPTIBLE. With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait path is used: tpm_tis_status() tpm_tis_spi_read_bytes() tpm_tis_spi_transfer_full() spi_bus_lock() mutex_lock() Address this with the following measures: 1. Call wait_tpm_stat_cond() only while tasking is running. 2. Use wait_woken() to wait for changes. | ||||
| CVE-2026-72153 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data. | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||
| CVE-2026-72131 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Prevent shared tags across queues on Apple A11 On Apple A11, tags of pending commands must be unique across the admin and IO queues, else the firmware crashes with "duplicate tag error for tag N", with N being the tag. Apply the existing workaround for M1 of reserving two tags for the admin queue to A11. | ||||