Export limit exceeded: 22363 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22363 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64349 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setup() calls the register read and write calls with dwc3->regs when both these calls take the dwc3 structure directly. Chnage these two calls to fix the following sparse warning, and possibly a nasty bug in the dwc3_ulpi_setup() code: drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs | ||||
| CVE-2026-64355 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP. | ||||
| CVE-2026-64377 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64385 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_ioctl() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_ioctl_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64386 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix query_info() replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_query_info_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64390 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: track the connection owning a byte-range lock SMB2_LOCK adds each granted byte-range lock to both the file lock list and the lock list of the connection which handled the request. The final close and durable handle paths, however, remove the connection list entry while holding fp->conn->llist_lock. With SMB3 multichannel, the connection handling the LOCK request can be different from the connection which opened the file. The entry can therefore be removed under a different spinlock from the one protecting the list it belongs to. A concurrent traversal can then access freed struct ksmbd_lock and struct file_lock objects. Record the connection owning each lock's clist entry and hold a reference to it while the entry is linked. Use that connection and its llist_lock for unlock, rollback, close, and durable preserve. Durable reconnect assigns the new connection as the owner when publishing the locks again. | ||||
| CVE-2026-64425 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop") fixed the obvious case where io_worker_handle_work() took one exit-bit snapshot before draining pending work, but the fix stops one level too early. io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work run loop, yet it still snapshots that bit once before processing a whole dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT after the first linked item has started, the remaining linked items can still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue running after exit has begun. Move the check further inside, so it covers linked items too. Note: this is a syzbot special as it loves setting up tons of slow linked work on weird devices like msr that take forever to read, and immediately close the ring. Exit then takes a long time. | ||||
| CVE-2026-64462 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: altera: Fix resource leaks on probe failure The chained IRQ handler is set during probe, but is only removed during the driver remove(). If pci_host_probe() fails, the handler and INTx IRQ domain remain set even though the devm-managed host bridge storage containing struct altera_pcie will be released, leaving the handler with a stale data pointer. Interrupts are also enabled before pci_host_probe() is called. If probe fails after that point, the controller interrupt source should be disabled before the chained handler and INTx domain are removed. So set the chained handler only after the INTx domain has been created. Disable controller interrupts during IRQ teardown, and tear the IRQ setup down if pci_host_probe() fails. [mani: commit log] | ||||
| CVE-2026-64478 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect. | ||||
| CVE-2026-64551 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate STALE_COOKIE cause length before reading staleness When an ERROR chunk with a STALE_COOKIE cause is received in the COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure of Staleness that follows the cause header: err = (struct sctp_errhdr *)(chunk->skb->data); stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err))); err is the first cause in the chunk, not the STALE_COOKIE cause that caused the dispatch, and nothing guarantees the staleness field is present. sctp_walk_errors() only requires a cause to be as long as the 4-byte header, so for a STALE_COOKIE cause of length 4 the read runs past the cause, and for a minimal ERROR chunk past skb->tail. The value is echoed to the peer in the Cookie Preservative of the reply INIT, leaking uninitialized memory. sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so check its length there and pass it to sctp_sf_do_5_2_6_stale(), which reads that cause instead of the first one. A STALE_COOKIE cause too short to hold the staleness field is discarded. The read is reachable by any peer that can drive an association into COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket in a user and network namespace. | ||||
| CVE-2026-64565 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data() The `ims_pcu_process_data()` processes incoming URB data byte by byte. However, it fails to check if the `read_pos` index exceeds IMS_PCU_BUF_SIZE. If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE, `read_pos` will increment indefinitely. Moreover, since `read_pos` is located immediately after `read_buf`, the attacker can overwrite `read_pos` itself to arbitrarily control the index. This manipulated `read_pos` is subsequently used in `ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a heap buffer overflow. Specifically, an attacker can overwrite the `cmd_done.wait.head` located at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`. Consequently, when the driver calls `complete(&pcu->cmd_done)`, it triggers a control flow hijack by using the manipulated pointer. Fix this by adding a bounds check for `read_pos` before writing to `read_buf`. If the packet is too long, discard it, log a warning, and reset the parser state. [dtor: factor out resetting packet state, reset checksum as well] | ||||
| CVE-2025-71269 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not free data reservation in fallback from inline due to -ENOSPC If we fail to create an inline extent due to -ENOSPC, we will attempt to go through the normal COW path, reserve an extent, create an ordered extent, etc. However we were always freeing the reserved qgroup data, which is wrong since we will use data. Fix this by freeing the reserved qgroup data in __cow_file_range_inline() only if we are not doing the fallback (ret is <= 0). | ||||
| CVE-2026-15904 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-08-04 | 8.8 High |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.128 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-64308 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SEV firmware docs for SNP_VLEK_LOAD note: > On SNP_SHUTDOWN, the VLEK is deleted. That is, the initialization/shutdown wrapper here is pointless, because the firmware immediately throws away the key anyway. Instead, refuse to do anything if SNP has not been previously initialized. This is an ABI break: before, this was a no-op and almost certainly a mistake by userspace, and now it returns -ENODEV. ABI compatibility could be maintained here by simply returning 0 in the check instead. | ||||
| CVE-2026-64311 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: loongson - Remove broken and unused loongson-rng The loongson-rng rng_alg has several vulnerabilities, including not providing forward security, and a use-after-free bug due to the use of wait_for_completion_interruptible(). Meanwhile, the rng_alg framework doesn't really have any purpose in the first place other than to access the software algorithms crypto/drbg.c and crypto/jitterentropy.c. Hardware-specific rng_algs have no in-kernel user, and unlike hwrng there's no feed into the actual Linux RNG. As such, there's really no point to this code. There are of course other rng_alg drivers that are similarly unused, but they're similarly in the process of being phased out, e.g. https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org Given that, there's no point in fixing forward these vulnerabilities, and it makes much more sense to simply roll back the addition of this driver. If this platform provides TRNG (not PRNG) functionality, it could make sense to add a hwrng driver, but it would be quite different. | ||||
| CVE-2026-64319 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: validate reply message payload bounds against transfer length nvmet_auth_reply() accesses the variable-length rval[] array using attacker-controlled hl (hash length) and dhvlen (DH value length) fields without verifying they fit within the allocated buffer of tl bytes. A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a small transfer length but large hl/dhvlen values, causing out-of-bounds heap reads when the target processes the DH public key (rval + 2*hl) or performs the host response memcmp. With DH authentication configured, the OOB pointer is passed directly to sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching up to 526 bytes past the buffer. This is exploitable pre-authentication. Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before any access to the variable-length fields. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-64341 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||
| CVE-2026-64361 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward. | ||||
| CVE-2026-64364 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit. | ||||
| CVE-2026-64375 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link(). | ||||