Export limit exceeded: 370354 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370354 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370354 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370354 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72116 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. | ||||
| CVE-2026-72118 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx variant runs under bcm_tx_lock and only needs to guard its own counter's overflow. As the rx path resets its values already at LONG_MAX / 100, there is no conflict between the two locking domains (bcm_rx_update_lock vs. bcm_tx_lock) even for ops that use both paths. The rx statistics update and the frames_filtered update in bcm_rx_changed() were previously performed in two separate bcm_rx_update_lock sections. For an rx op subscribed on all interfaces (ifindex == 0), bcm_rx_handler() can run concurrently on different CPUs, so a counter reset by one CPU between these two sections could leave frames_filtered larger than frames_abs on another CPU, producing a bogus (even negative) reduction percentage in procfs. Update the statistics in the same critical section as bcm_rx_changed() to close this gap, which also removes the now unneeded extra lock/unlock pair around the traffic_flags calculation. | ||||
| CVE-2026-72121 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock. | ||||
| CVE-2026-72122 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded. | ||||
| CVE-2026-72124 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | ||||
| CVE-2026-72127 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace. | ||||
| CVE-2026-72128 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path. | ||||
| CVE-2026-74471 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded. | ||||
| CVE-2026-74494 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject repeated SMB2 NEGOTIATE requests Unauthenticated client can send multiple successful SMB2 NEGOTIATE requests on one connection before SESSION_SETUP. While the connection is in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation. Only the final allocation is freed when the connection is released, leaking one object for every additional successful request. A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect without replying in this case. Set the connection exiting when rejecting the request, in addition to suppressing the response. Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they update connection-wide dialect and negotiation state. Move the locking contract to ksmbd_smb_negotiate_common(), where the state and dialect are selected, and add ksmbd_conn_new() for consistent state access. | ||||
| CVE-2026-74500 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix stack info leak in RME Digiface status snd_rme_digiface_read_status() reads a four-word status block from the device into an uninitialised on-stack __le32 buf[4] and, whenever the vendor control-IN transfer does not return a negative error, copies all four words into the caller's status[]. snd_usb_ctl_msg() copies the full requested size back into the caller's buffer regardless of how many bytes the data stage actually delivered: buf = kmemdup(data, size, GFP_KERNEL); err = usb_control_msg(dev, pipe, request, requesttype, value, index, buf, size, timeout); memcpy(data, buf, size); usb_control_msg() returns the transferred length on a short control-IN, which is a non-negative value, and writes only that many bytes. The remainder of the copy back is the kmemdup()ed image of the caller's buffer, so a device answering with a short data stage leaves the trailing words of buf[] holding leftover kernel stack. The only guard in the caller is err < 0, so those words are stored into status[]. They then reach user space: snd_rme_digiface_get_status_val() selects a 16-bit halfword of status[] per the control's reg/mask, and the eight Digiface status controls together expose the whole 16-byte frame to an unprivileged reader of /dev/snd/controlC*. Zero-initialise the buffer so a short read yields zeros instead of stack residue. This mirrors snd_rme_get_status1(), which already clears its output word before the same kind of vendor read. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-11801 | 2026-08-18 | 7.5 High | ||
| The WPAdverts – Classifieds Plugin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.3.2. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to retrieve internal site configuration data exposed by the classifieds-types REST endpoint, including registered post types, labels, associated taxonomies, form scheme metadata, contact options, and custom field meta keys. | ||||
| CVE-2026-73849 | 1 Emlog | 1 Emlog | 2026-08-18 | 9.8 Critical |
| Emlog is an open source website building system. In 2.6.26 and earlier, install.php accepts action=reinstall without authentication and deliberately skips the already-installed check because the guard runs only when $act != 'reinstall'. A remote attacker can submit hostname, dbuser, dbpasswd, dbname, dbprefix, username, password, and email values to cause file_put_contents('config.php', $config) to overwrite the configuration with attacker-controlled database settings and create a new administrator account. No fixed version is available as of this review. | ||||
| CVE-2026-73844 | 1 Ondata | 1 Ckan-mcp-server | 2026-08-18 | 3.7 Low |
| CKAN MCP Server is a tool for querying CKAN open data portals. Prior to 0.4.112, error paths reflect raw upstream response bodies and internal exception messages back to the caller instead of a sanitized, generic message. When the server is pointed at (or redirected/SSRF'd to) a host that returns a non-CKAN response, or when an internal exception occurs, the caller receives verbatim upstream content and internal detail (hostnames, internal IPs, DB errors, stack fragments). This vulnerability is fixed in 0.4.112. | ||||
| CVE-2026-73842 | 1 Openchoreo | 1 Openchoreo | 2026-08-18 | 9 Critical |
| OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.3, 1.1.3, and 1.2.0-rc.2, internal/cluster-gateway/server.go exposed /api/proxy/, /api/exec/, and /api/wirelogs/ on an internal listener without requiring a client certificate or token, allowing any network-reachable caller to read tenant Kubernetes Secrets, mutate workloads, and execute commands across connected data planes. This issue is fixed in versions 1.0.3, 1.1.3, and 1.2.0-rc.2. | ||||
| CVE-2026-73665 | 1 Freepbx | 1 Ucp | 2026-08-18 | N/A |
| FreePBX is an open source IP PBX. Prior to 17.0.9, the UCP Node server on ports 8001 and 8003 uses io.use(checkAuth) in node/lib/server.js, but Socket.IO version 4 applies that middleware only to the default namespace. An unauthenticated client can connect to custom namespaces that do not consistently invoke checkAuth in node/lib/auth.js and send crafted event values containing carriage-return or newline characters through the Asterisk Manager Interface action path patched by node/lib/asterisk-manager-patch.js, allowing arbitrary commands to execute as the asterisk service user. This issue is fixed in version 17.0.9. | ||||
| CVE-2026-73660 | 1 Freepbx | 1 Tts | 2026-08-18 | N/A |
| FreePBX is an open source IP PBX. Prior to 16.0.6 and 17.0.5.4, the FreePBX Text-To-Speech module allows an authenticated administrator to save a TTS destination name that is HTML-encoded for storage, decoded during dialplan generation, passed as an AGI argument, and used to build filenames inside agi-bin/propolys-tts.agi. The TTS destination name reaches a raw shell-command execution path, allowing arbitrary operating-system command execution as the asterisk service user. This issue is fixed in versions 16.0.6 and 17.0.5.4. | ||||
| CVE-2026-73655 | 1 Triggerdotdev | 1 Trigger.dev | 2026-08-18 | 7.4 High |
| Trigger.dev is a platform for building and deploying fully managed AI agents and workflows. Prior to 4.5.2, addGoogleStrategy() in apps/webapp/app/services/googleAuth.server.ts passes a Google profile email to findOrCreateGoogleUser() in apps/webapp/app/models/user.server.ts without requiring Google's email_verified assertion. When existingEmailUser && !existingUser is true, the flow writes the new Google authIdentifier into the existing email-matched account and returns that user object, allowing an attacker-controlled Google profile with an unverified matching email to take over the account. This issue is fixed in version 4.5.2. | ||||
| CVE-2026-73650 | 1 Svg | 1 Svgo | 2026-08-18 | 8.2 High |
| SVGO, short for SVG Optimizer, is a Node.js library and command-line application for optimizing SVG files. From version 1.0.0 until versions 2.8.3, 3.3.4, and 4.0.2, the removeScripts plugin, named removeScriptElement in versions 1 through 3, can leave executable content in optimized SVGs because it does not remove namespaced or prefixed script elements such as <svg:script> and, in versions 3 and 4, matches JavaScript URIs case sensitively. Applications that process untrusted SVG input with this plugin enabled and serve the result can allow scripts to execute when another user opens the SVG, exposing local storage or cookies. This issue is fixed in versions 2.8.3, 3.3.4, and 4.0.2. | ||||
| CVE-2026-73644 | 1 Openidentityplatform | 1 Opendj | 2026-08-18 | 9.6 Critical |
| OpenDJ is an LDAPv3 compliant directory service. Prior to 5.1.2, the SASL PLAIN authorization identity path in opendj-server-legacy/src/main/java/org/opends/server/extensions/PlainSASLMechanismHandler.java checked the PROXIED_AUTH privilege but did not evaluate the mayProxy proxy ACI scope when an authzid resolved to a different user. Both dn: and u: or bare authzid forms could therefore let an authenticated account holding PROXIED_AUTH assume any resolvable non-root identity outside the identities permitted by its proxy ACI. The fix returns INVALID_CREDENTIALS (49) before password verification when the target authorization identity is not permitted. This issue is fixed in version 5.1.2. | ||||