Export limit exceeded: 22806 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22806 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50208 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: amlogic: Fix refcount leak in meson-secure-pwrc.c In meson_secure_pwrc_probe(), there is a refcount leak in one fail path. | ||||
| CVE-2022-50181 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio-gpu: fix a missing check to avoid NULL dereference 'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset() and it will lead to a NULL dereference by a lately use of it (i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check. [ kraxel: minor codestyle fixup ] | ||||
| CVE-2022-50179 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ath9k: fix use-after-free in ath9k_hif_usb_rx_cb Syzbot reported use-after-free Read in ath9k_hif_usb_rx_cb() [0]. The problem was in incorrect htc_handle->drv_priv initialization. Probable call trace which can trigger use-after-free: ath9k_htc_probe_device() /* htc_handle->drv_priv = priv; */ ath9k_htc_wait_for_target() <--- Failed ieee80211_free_hw() <--- priv pointer is freed <IRQ> ... ath9k_hif_usb_rx_cb() ath9k_hif_usb_rx_stream() RX_STAT_INC() <--- htc_handle->drv_priv access In order to not add fancy protection for drv_priv we can move htc_handle->drv_priv initialization at the end of the ath9k_htc_probe_device() and add helper macro to make all *_STAT_* macros NULL safe, since syzbot has reported related NULL deref in that macros [1] | ||||
| CVE-2025-38093 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: x1e80100: Add GPU cooling Unlike the CPU, the GPU does not throttle its speed automatically when it reaches high temperatures. With certain high GPU loads it is possible to reach the critical hardware shutdown temperature of 120°C, endangering the hardware and making it impossible to run certain applications. Set up GPU cooling similar to the ACPI tables, by throttling the GPU speed when reaching 95°C and polling every 200ms. | ||||
| CVE-2022-50143 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: intel_th: Fix a resource leak in an error handling path If an error occurs after calling 'pci_alloc_irq_vectors()', 'pci_free_irq_vectors()' must be called as already done in the remove function. | ||||
| CVE-2025-38101 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set() Enlarge the critical section in ring_buffer_subbuf_order_set() to ensure that error handling takes place with per-buffer mutex held, thus preventing list corruption and other concurrency-related issues. | ||||
| CVE-2022-50144 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: revisit driver bind/unbind and callbacks In the SoundWire probe, we store a pointer from the driver ops into the 'slave' structure. This can lead to kernel oopses when unbinding codec drivers, e.g. with the following sequence to remove machine driver and codec driver. /sbin/modprobe -r snd_soc_sof_sdw /sbin/modprobe -r snd_soc_rt711 The full details can be found in the BugLink below, for reference the two following examples show different cases of driver ops/callbacks being invoked after the driver .remove(). kernel: BUG: kernel NULL pointer dereference, address: 0000000000000150 kernel: Workqueue: events cdns_update_slave_status_work [soundwire_cadence] kernel: RIP: 0010:mutex_lock+0x19/0x30 kernel: Call Trace: kernel: ? sdw_handle_slave_status+0x426/0xe00 [soundwire_bus 94ff184bf398570c3f8ff7efe9e32529f532e4ae] kernel: ? newidle_balance+0x26a/0x400 kernel: ? cdns_update_slave_status_work+0x1e9/0x200 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: BUG: unable to handle page fault for address: ffffffffc07654c8 kernel: Workqueue: pm pm_runtime_work kernel: RIP: 0010:sdw_bus_prep_clk_stop+0x6f/0x160 [soundwire_bus] kernel: Call Trace: kernel: <TASK> kernel: sdw_cdns_clock_stop+0xb5/0x1b0 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: intel_suspend_runtime+0x5f/0x120 [soundwire_intel aca858f7c87048d3152a4a41bb68abb9b663a1dd] kernel: ? dpm_sysfs_remove+0x60/0x60 This was not detected earlier in Intel tests since the tests first remove the parent PCI device and shut down the bus. The sequence above is a corner case which keeps the bus operational but without a driver bound. While trying to solve this kernel oopses, it became clear that the existing SoundWire bus does not deal well with the unbind case. Commit 528be501b7d4a ("soundwire: sdw_slave: add probe_complete structure and new fields") added a 'probed' status variable and a 'probe_complete' struct completion. This status is however not reset on remove and likewise the 'probe complete' is not re-initialized, so the bind/unbind/bind test cases would fail. The timeout used before the 'update_status' callback was also a bad idea in hindsight, there should really be no timing assumption as to if and when a driver is bound to a device. An initial draft was based on device_lock() and device_unlock() was tested. This proved too complicated, with deadlocks created during the suspend-resume sequences, which also use the same device_lock/unlock() as the bind/unbind sequences. On a CometLake device, a bad DSDT/BIOS caused spurious resumes and the use of device_lock() caused hangs during suspend. After multiple weeks or testing and painful reverse-engineering of deadlocks on different devices, we looked for alternatives that did not interfere with the device core. A bus notifier was used successfully to keep track of DRIVER_BOUND and DRIVER_UNBIND events. This solved the bind-unbind-bind case in tests, but it can still be defeated with a theoretical corner case where the memory is freed by a .remove while the callback is in use. The notifier only helps make sure the driver callbacks are valid, but not that the memory allocated in probe remains valid while the callbacks are invoked. This patch suggests the introduction of a new 'sdw_dev_lock' mutex protecting probe/remove and all driver callbacks. Since this mutex is 'local' to SoundWire only, it does not interfere with existing locks and does not create deadlocks. In addition, this patch removes the 'probe_complete' completion, instead we directly invoke the 'update_status' from the probe routine. That removes any sort of timing dependency and a much better support for the device/driver model, the driver could be bound before the bus started, or eons after the bus started and the hardware would be properly initialized in all cases. BugLink: https://github.com/thesofproject/linux/is ---truncated--- | ||||
| CVE-2022-50151 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix random warning message when driver load Warning log: [ 4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code! [ 4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20 [ 4.158010] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.163155] Call trace: [ 4.165600] dump_backtrace+0x0/0x1b0 [ 4.169286] show_stack+0x18/0x68 [ 4.172611] dump_stack_lvl+0x68/0x84 [ 4.176286] dump_stack+0x18/0x34 [ 4.179613] kmalloc_fix_flags+0x60/0x88 [ 4.183550] new_slab+0x334/0x370 [ 4.186878] ___slab_alloc.part.108+0x4d4/0x748 [ 4.191419] __slab_alloc.isra.109+0x30/0x78 [ 4.195702] kmem_cache_alloc+0x40c/0x420 [ 4.199725] dma_pool_alloc+0xac/0x1f8 [ 4.203486] cdns3_allocate_trb_pool+0xb4/0xd0 pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags) { ... page = kmalloc(sizeof(*page), mem_flags); page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation, &page->dma, mem_flags); ... } kmalloc was called with mem_flags, which is passed down in cdns3_allocate_trb_pool() and have GFP_DMA32 flags. kmall_fix_flags() report warning. GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle DMA memory region correctly by pool->dev. GFP_DMA32 can be removed safely. | ||||
| CVE-2025-38114 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: e1000: Move cancel_work_sync to avoid deadlock Previously, e1000_down called cancel_work_sync for the e1000 reset task (via e1000_down_and_stop), which takes RTNL. As reported by users and syzbot, a deadlock is possible in the following scenario: CPU 0: - RTNL is held - e1000_close - e1000_down - cancel_work_sync (cancel / wait for e1000_reset_task()) CPU 1: - process_one_work - e1000_reset_task - take RTNL To remedy this, avoid calling cancel_work_sync from e1000_down (e1000_reset_task does nothing if the device is down anyway). Instead, call cancel_work_sync for e1000_reset_task when the device is being removed. | ||||
| CVE-2025-38116 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix uaf in ath12k_core_init() When the execution of ath12k_core_hw_group_assign() or ath12k_core_hw_group_create() fails, the registered notifier chain is not unregistered properly. Its memory is freed after rmmod, which may trigger to a use-after-free (UAF) issue if there is a subsequent access to this notifier chain. Fixes the issue by calling ath12k_core_panic_notifier_unregister() in failure cases. Call trace: notifier_chain_register+0x4c/0x1f0 (P) atomic_notifier_chain_register+0x38/0x68 ath12k_core_init+0x50/0x4e8 [ath12k] ath12k_pci_probe+0x5f8/0xc28 [ath12k] pci_device_probe+0xbc/0x1a8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x1b0 driver_probe_device+0x44/0x130 __driver_attach+0xcc/0x208 bus_for_each_dev+0x84/0x100 driver_attach+0x2c/0x40 bus_add_driver+0x130/0x260 driver_register+0x70/0x138 __pci_register_driver+0x68/0x80 ath12k_pci_init+0x30/0x68 [ath12k] ath12k_init+0x28/0x78 [ath12k] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-38121 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: avoid panic on init failure In case of an error during init, in_hw_restart will be set, but it will never get cleared. Instead, we will retry to init again, and then we will act like we are in a restart when we are actually not. This causes (among others) to a NULL pointer dereference when canceling rx_omi::finished_work, that was not even initialized, because we thought that we are in hw_restart. Set in_hw_restart to true only if the fw is running, then we know that FW was loaded successfully and we are not going to the retry loop. | ||||
| CVE-2025-38128 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data (i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes). Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()' to do 'skb_put_data()' from an area beyond the one actually passed to 'mgmt_hci_cmd_sync()'. | ||||
| CVE-2022-50152 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2025-38130 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/connector: only call HDMI audio helper plugged cb if non-null On driver remove, sound/soc/codecs/hdmi-codec.c calls the plugged_cb with NULL as the callback function and codec_dev, as seen in its hdmi_remove function. The HDMI audio helper then happily tries calling said null function pointer, and produces an Oops as a result. Fix this by only executing the callback if fn is non-null. This means the .plugged_cb and .plugged_cb_dev members still get appropriately cleared. | ||||
| CVE-2025-38156 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init() devm_ioremap() returns NULL on error. Currently, mt7996_mmio_wed_init() does not check for this case, which results in a NULL pointer dereference. Prevent null pointer dereference in mt7996_mmio_wed_init() | ||||
| CVE-2025-38155 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init() devm_ioremap() returns NULL on error. Currently, mt7915_mmio_wed_init() does not check for this case, which results in a NULL pointer dereference. Prevent null pointer dereference in mt7915_mmio_wed_init(). | ||||
| CVE-2025-38132 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: holding cscfg_csdev_lock while removing cscfg from csdev There'll be possible race scenario for coresight config: CPU0 CPU1 (perf enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() <iterating config_csdev_list> cscfg_remove_owned_csdev_configs() // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) iterating config_csdev_list could be raced with config_csdev_list's entry delete. To resolve this race , hold csdev->cscfg_csdev_lock() while cscfg_remove_owned_csdev_configs() | ||||
| CVE-2025-38133 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4851: fix ad4858 chan pointer handling The pointer returned from ad4851_parse_channels_common() is incremented internally as each channel is populated. In ad4858_parse_channels(), the same pointer was further incremented while setting ext_scan_type fields for each channel. This resulted in indio_dev->channels being set to a pointer past the end of the allocated array, potentially causing memory corruption or undefined behavior. Fix this by iterating over the channels using an explicit index instead of incrementing the pointer. This preserves the original base pointer and ensures all channel metadata is set correctly. | ||||
| CVE-2025-38134 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: acpi: Prevent null pointer dereference in usb_acpi_add_usb4_devlink() As demonstrated by the fix for update_port_device_state, commit 12783c0b9e2c ("usb: core: Prevent null pointer dereference in update_port_device_state"), usb_hub_to_struct_hub() can return NULL in certain scenarios, such as during hub driver unbind or teardown race conditions, even if the underlying usb_device structure exists. Plus, all other places that call usb_hub_to_struct_hub() in the same file do check for NULL return values. If usb_hub_to_struct_hub() returns NULL, the subsequent access to hub->ports[udev->portnum - 1] will cause a null pointer dereference. | ||||
| CVE-2025-38137 | 1 Linux | 1 Linux Kernel | 2025-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log] | ||||