Export limit exceeded: 373226 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 86632 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (86632 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19744 | 1 Maalfer | 1 Pentestify | 2026-08-14 | N/A |
| Cross-site Scripting in the Markdown renderer in maalfer Pentestify before 2.3.2 allows authenticated users to execute arbitrary JavaScript in the application origin via a Markdown link whose URL contains a double quote, which closes the anchor's href attribute because the renderer's sanitization step does not escape quotes | ||||
| CVE-2026-42006 | 2 Dovecot, Open-xchange | 3 Dovecot, Dovecot, Ox Dovecot Pro | 2026-08-14 | 4.3 Medium |
| An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. | ||||
| CVE-2026-68257 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix 32-bit overflow in CWSR total size calculation total_cwsr_size was computed in 32-bit before being used as a BO/SVM allocation size. With large ctx_save_restore_area_size and debug_memory_size multiplied by the XCC count, the product can wrap, yielding an undersized CWSR save area that firmware later overruns. Promote total_cwsr_size to u64 and use check_add_overflow()/ check_mul_overflow() in both kfd_queue_acquire_buffers() and kfd_queue_release_buffers(). (cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) | ||||
| CVE-2026-68161 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed. | ||||
| CVE-2026-68265 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC When prefetch region is DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC for a BO VMA, the code used it as an index into region_to_mem_type[], causing an out-of-bounds access since the value is -1. Resolve the preferred location for BO VMAs directly: local VRAM on dGFX (using the BO's tile placement) or system memory on iGPU. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: -Fix null dereference (cherry picked from commit d9a4906ac03be9f6ed3f3b45c56c866b867fd75b) | ||||
| CVE-2026-45853 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2025-71315 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Convert to DRM's vblank timer Replace vkms' vblank timer with the DRM implementation. The DRM code is identical in concept, but differs in implementation. Vblank timers are covered in vblank helpers and initializer macros, so remove the corresponding hrtimer in struct vkms_output. The vblank timer calls vkms' custom timeout code via handle_vblank_timeout in struct drm_crtc_helper_funcs. | ||||
| CVE-2026-45883 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: sca3000: Fix a resource leak in sca3000_probe() spi->irq from request_threaded_irq() not released when iio_device_register() fails. Add an return value check and jump to a common error handler when iio_device_register() fails. | ||||
| CVE-2026-46089 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: do not forget to endio for partial discard requests As reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0 takes literally forever to complete. zram doesn't support partial discards and just returns immediately w/o doing any discard work in such cases. The problem is that we forget to endio on our way out, so blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to end_bio label, which does bio_endio(). | ||||
| CVE-2026-46103 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: ucan: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the control message buffer lifetime so that it is released on driver unbind. | ||||
| CVE-2026-68440 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix heap overflow when reading module EEPROM txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes into the caller buffer, which ethtool allocates with exactly 'length' bytes. A non-4-aligned length therefore causes an out-of-bounds write. Copy only the remaining bytes on the final dword instead. | ||||
| CVE-2026-68419 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent rereg_mr for non-mem regions When a QP/CQ/SRQ is created, a two step process is used where the buffer is allocated in userspace and explicitly registered with the normal reg_mr mechanism prior to creating the actual QP/CQ/SRQ object. These special registrations are indicated via an ABI field so the driver knows that they do not have a valid mkey and to skip the actual CQP command submission. Since these are real MR objects from the core's perspective, it is possible for a user application to invoke rereg_mr on them and cause a real CQP op to be emitted with the zero-initialized mkey value of 0. Fix this by preventing rereg_mr on these special regions. | ||||
| CVE-2026-68401 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit() Sashiko (locally) reports multiple out-of-bound issues in ffa_setup_and_transmit: 1) Writing ep_mem_access->reserved can write out of bounds for FFA versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case while reserved has an offset of 24. Instead of zeroing fields, memset the struct to zero first based on the FFA version. 2) Make sure there is enough size to write constituents. While at it, convert the only sizeof() in the driver that uses a type instead of variable. | ||||
| CVE-2026-68314 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() registers the I3C bus notifier and then walks the existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL) before registering the I3C device driver. If i3c_driver_register() fails, the function returns the error directly, leaving the notifier registered and every mctp_i3c_bus object created for the existing buses allocated. The notifier is left pointing into the module that failed to load and the bus list is leaked. Mirror the module exit path on this failure: unregister the notifier and tear down the buses that were added before returning the error. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-68298 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create() Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made xe_svm_init() unconditional in xe_vm_create() and extended it to also initialize a "simple" gpusvm state for non-fault-mode VMs. The matching xe_svm_fini() call in xe_vm_close_and_put() was updated to run unconditionally, but the error unwind path in xe_vm_create() was not. On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has already succeeded but xe_svm_fini() is only called when XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves vm->svm.gpusvm partially initialized and leaks the resources allocated by drm_gpusvm_init(). For fault-mode VMs, xe_svm_init() additionally acquires the pagemap owner via drm_pagemap_acquire_owner() and the pagemaps via xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(), not xe_svm_fini(). On the same error path, xe_svm_close() is not called either, so fault-mode VMs leak the pagemap owner and pagemaps. Fix both leaks: - Call xe_svm_fini() unconditionally on the err_svm_fini path, matching the unconditional xe_svm_init() call. Move the vm->size = 0 assignment out of the conditional so the xe_vm_is_closed() assert in xe_svm_fini() (and xe_svm_close()) holds for both modes. - Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching the ordering used in xe_vm_close_and_put(). (cherry picked from commit ca2a3587d577ba764e0fe628fb676244fc33ddd4) | ||||
| CVE-2026-68287 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. | ||||
| CVE-2026-68274 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix buffer overflow in steered register list allocation The size calculation for the steered register extarray uses only the geometry DSS mask (g_dss_mask) to determine the number of entries to allocate: total = bitmap_weight(gt->fuse_topo.g_dss_mask, ...) * steer_reg_num; However, the filling loop uses for_each_dss_steering(), which iterates over for_each_dss(), defined as the union of g_dss_mask and c_dss_mask (geometry + compute DSS). On platforms with compute-only DSS bits, the loop writes past the allocated buffer, corrupting adjacent slab objects. This manifests as list_del corruption and SLUB redzone overwrites during drm_managed_release on device unbind, since the overflow corrupts the drmres list_head of neighboring allocations. Fix by computing the allocation size using the union of both DSS masks, matching the iteration pattern of for_each_dss_steering(). -- v2: - use bitmap_weighted_or() (Zhanjun) (cherry picked from commit 0a78a44f4901aa6c9263e66be7fce02282f1109f) | ||||
| CVE-2026-68264 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: Reset current_op in xe_pt_update_ops_init() xe_pt_update_ops_init() fails to reset current_op to 0. On the vm_bind path, ops_execute() calls xe_pt_update_ops_prepare() inside the xe_validation_guard() / drm_exec_until_all_locked() loop. When that loop retries due to lock contention or OOM eviction (drm_exec_retry_on_contention() / xe_validation_retry_on_oom()), xe_pt_update_ops_prepare() runs again on the same vops, and each call to bind_op_prepare() increments current_op without resetting it. After N retries current_op exceeds the array size allocated by xe_vma_ops_alloc(), causing an out-of-bounds write into SLUB-poisoned memory and a subsequent UAF crash in xe_migrate_update_pgtables_cpu() when reading the corrupted pt_op->bind. Also reset needs_svm_lock and needs_invalidation which are derived in the same prepare pass and would otherwise cause wrong migrate ops selection and redundant TLB invalidation on retry. Fix this by resetting current_op, needs_svm_lock and needs_invalidation in xe_pt_update_ops_init(). v2 (Matt): - Add details in commit message. - Add Fixes tag and Cc to stable@vger.kernel.org (cherry picked from commit 046045543e530605c441063535e7dca0075369a6) | ||||
| CVE-2026-68262 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix user array stride in pvr_set_uobj_array() pvr_set_uobj_array() copies an array of kernel objects to a userspace array whose element size is described by out->stride. When out->stride is different from the kernel object size, the slow path advances the userspace pointer by the kernel object size and the kernel pointer by the userspace stride. This reverses the intended layout. For larger userspace strides, later copies read from the wrong kernel addresses. For smaller userspace strides, later copies are written at the wrong userspace offsets. The padding clear is also done only for the first element instead of the padding area for each element. Advance the userspace pointer by out->stride and the kernel pointer by obj_size, and clear per-element padding while the current userspace pointer is still available. | ||||
| CVE-2026-68258 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds on CRIU restore queue type and mqd size We weren't checking whether the values provided in the private data in kfd CRIU restore were within bounds. For queue type, add a KFD_QUEUE_TYPE_MAX and ensure the provided type is less than it. For mqd_size, add new function mqd_size_from_queue_type and confirm that the provided mqd_size matches expectations. (cherry picked from commit f19d8086f6644083c913d70bfdeee20e1b6f46a5) | ||||