Export limit exceeded: 373800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 373800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373800 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74586 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear new_transport when removing a peer sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport. An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport. sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state. The issue was found during a static audit of SCTP objects. With an authenticated peer, the reproducer triggered the same KASAN report in 2 of 2 unpatched runs on a KASAN-enabled netdev/main kernel: BUG: KASAN: slab-use-after-free in sctp_outq_select_transport Read of size 4 at addr ffff88800b9bd95c by task python3/197 Call Trace: sctp_outq_select_transport+0x549/0x8b0 [sctp] sctp_outq_flush+0x306/0x2c60 [sctp] sctp_transport_immediate_rtx+0xaf/0x260 [sctp] sctp_process_asconf_ack+0xa48/0xf70 [sctp] Allocated by task 197: sctp_transport_new+0x68/0x650 [sctp] sctp_assoc_add_peer+0x258/0x12a0 [sctp] sctp_process_asconf+0x5e9/0x1090 [sctp] Last potentially related work creation: __call_rcu_common.constprop.0+0x77/0xb70 sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp] sctp_process_asconf+0xd9c/0x1090 [sctp] The first invalid access was a four-byte read of transport->state at net/sctp/outqueue.c:833. The same reproducer completed the full authenticated ASCONF and local-address replacement sequence with this change without a KASAN report or oops. Clear new_transport when its peer is removed, before it can be used to create the HEARTBEAT. | ||||
| CVE-2026-74590 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions The BPF verifier and the dynptr abstraction ensure that the memory space referenced by a dynptr remains valid. They do not, however, provide any guarantee that the contents of the memory are stable. kfuncs are expected to remain memory-safe even if concurrent modifications occur. bpf_get_fsverity_digest() didn't follow that: it could crash if arg->digest_size was concurrently modified. Fix that by using the known-good value hash_alg->digest_size instead. Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return type of __bpf_dynptr_size(). It doesn't appear that it can actually be more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes file-based pointers), but the correct type might as well be used. | ||||
| CVE-2026-74659 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mrp: fix uninitialised bytes on the wire br_mrp_alloc_test_skb() builds MRP test frames on an skb from dev_alloc_skb(), which does not clear the linear data area. On the MRA ring-role branch the sub-option TLV header is appended with sub_tlv = skb_put(skb, sizeof(*sub_tlv)); sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR; so sub_tlv->length is never written, and the two trailing alignment bytes are appended with a bare skb_put() that does not clear them either. The neighbouring oui and sub_opt regions are explicitly zeroed, so three uninitialised bytes are left in every MRA MRP_Test frame that goes out. Put the sub-option TLV header and the alignment padding in a single skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no payload, so the zeroed length field is already the value it should have. | ||||
| CVE-2026-74665 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fix skb length accounting after generic XDP frag adjustment Generic XDP exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly. | ||||
| CVE-2026-0013 | 1 Google | 1 Android | 2026-08-22 | 8.4 High |
| In setupLayout of PickActivity.java, there is a possible way to start any activity as a DocumentsUI app due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-74603 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix board ID over-read The EEPROM board ID is a fixed 13-byte field and is not guaranteed to contain a NUL terminator. Passing it directly to devlink_info_version_fixed_put() treats it as a C string and may read beyond the field. Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer before reporting the ID. Use a precision limit because the snprintf() output size alone does not bound the source string scan. | ||||
| CVE-2026-74605 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Use children field for rcu head and add memory barriers When an eventfs inode is freed, it sets ei->is_freed and then uses its ei->list to add it to the srcu link list as the list field is a union with the rcu list head. As the ei->list is used to iterate over an SRCU protected list without taking the eventfs_mutex, there's nothing stopping the iteration over that list to see the ei->rcu instead of the ei->list and it will read a corrupt target. To fix this, change the union of the rcu list head with the children list. On freeing the eventfs inode, set the is_free and execute a smp_wmb() before adding the eventfs inode to the SRCU list. On iteration of the ei->children list, at the start, execute a smp_rmb() and then read the is_freed of the ei to see if the children list is still valid. If is_freed is set, then the ei_child read is not valid and the loop should exit immediately. | ||||
| CVE-2026-74610 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tls: don't leave a full plaintext sk_msg ring unpushed When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills the plaintext sk_msg ring, it does not set full_record, so the record is left full and unpushed. A later splice() then adds to an already full ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps onto sg.start and the ring appears empty. Fragments added after that overwrite live entries, and sg.size no longer matches what is reachable between sg.start and sg.end, so pushing the record runs the scatterwalk off the end of the scatterlist. An unprivileged user can trigger this on a loopback TCP socket with the "tls" ULP attached: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0 Call Trace: skcipher_walk_next+0x1d1/0x2c0 gcm_encrypt_aesni_avx+0x1e9/0x220 bpf_exec_tx_verdict+0x3bb/0x860 tls_sw_sendmsg+0xa1a/0xca0 __sys_sendto+0x1da/0x1f0 Set full_record in the copy path when the ring becomes full, and push a record that is already full on entry to the sendmsg loop. | ||||
| CVE-2026-74611 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length. | ||||
| CVE-2026-74629 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/dibs: Correct freeing of dmb_clientid_arr A dibs device interrupt handler can be active after dibs_dev_del() and may still access dmb_clientid_arr. (UAF) In case of a failure in dibs_dev_add() being called by dibs_lo_dev_probe() dmb_clientid_arr is freed twice (double free). Free dmb_clientid_arr in dibs_dev_release() after last reference is gone. Note that allocating in dibs_dev_add() instead of dibs_dev_alloc() is ok for now, because no dmbs can be registered before dibs_dev_add(). | ||||
| CVE-2026-74635 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: bitblit: bound-check glyph index in bit_cursor() bit_cursor() fetches the glyph under the cursor with c = scr_readw(vc_pos); src = vc_font.data + ((c & charmask) * w * height); where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer value comes directly from scr_readw() and may be larger than the current font's glyph count. Syzkaller triggers this via vcs_write(). The Call Trace shows vcs_write() in vc_screen.c writing an arbitrary 16-bit value with writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via vcs_scr_writew() without checking charcount. The stored value is later read in bit_cursor() in bitblit.c. When the font is changed from a font with 512 glyphs to a font with 256 glyphs, the screen buffer can retain characters with the high bit set from the previous mode, which could also produce the same out-of-bounds access. BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70 Read of size 16 at addr ffff800086c57970 Call Trace: soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70 bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365 fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427 hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883 update_region+0x100/0x18c drivers/tty/vt/vt.c:669 vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685 bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph index to vc_font.charcount. Apply the same clamp in bit_cursor() after extracting the attribute and masking, before indexing fontdata. The fix completes the bounds checking started in commit 18c4ef4e765a ("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed the cursor path. This change should be safe because the clamp reuses the existing contract from fbcon: charcount is maintained under console_lock in con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when switching from 512 to 256 glyphs. When stale screen data with high bits remains after a font switch, or when vcs_write() stores an arbitrary value, clamping the index to 0 prevents the out-of-bounds read without changing cursor semantics — the same fallback bit_putcs uses. | ||||
| CVE-2026-74709 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: clear metadata pointer when no timestamp is requested User space can change metadata flags after request processing. Rereading them during completion can therefore make the kernel write a timestamp that was not requested when the packet was submitted. Clear the metadata pointer during request processing unless timestamp completion is requested. Completion handling can then use the pointer itself instead of rereading the flags. On the mlx5 multi-packet WQE path metadata is evaluated per batch: xsk_tx_metadata_request() runs only for the descriptor that starts a session, just like the checksum offload that is applied once through the shared WQE. Only that descriptor's pointer is reset, so completion handling can record a timestamp for the other descriptors of the session regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays inside the metadata area; the single-WQE, other zero-copy, and generic paths reset the pointer per descriptor and are unaffected. | ||||
| CVE-2026-74724 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: avoid out-of-bounds write in ip_vs_nat_icmp Sashiko warns that local attacker can modify the packet while it is processed by IPVS. Some places read the IP ihl field multiple times which can cause out-of-bounds access. One such place is ip_vs_nat_icmp where we can write after the validated area. Fix it by providing ciph argument just like it is done for IPv6 and use ciph->len as offset to the embedded transport header. Modify some IPv4 header checks by reading the ihl field only once. | ||||
| CVE-2026-74648 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: validate monitor transmit frame lengths rtw_cfg80211_monitor_if_xmit_entry() removes the radiotap header and then reads the 802.11 frame control field without checking that a base 802.11 header remains. The data path also pulls the calculated 802.11, QoS and SNAP header span before confirming that the skb contains it. A truncated frame can therefore cause out-of-bounds reads or leave insufficient data for the Ethernet address writes. Reject frames that do not contain the base 802.11 header and data frames that do not contain their complete calculated header span. | ||||
| CVE-2026-74592 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ima: Instantiate file_truncate and path_truncate hooks Instantiate the file_truncate and path_truncate LSM hooks to reset the action cache flags (IMA_DONE_MASK) as soon as truncation is requested, so the file, based on policy, is re-collected, re-measured, re-audited, and re-appraised on next access. | ||||
| CVE-2026-74667 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: reset the MAC header on the packet-socket transmit path packet_parse_headers() resets the MAC header only for a SOCK_RAW frame whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket, any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave skb->mac_header unset here. For frames sent via __dev_queue_xmit() this is harmless: it resets the MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS path uses dev_direct_xmit(), which does not, so the frame reaches ndo_start_xmit() with the MAC header unset. A driver that reads eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an out-of-bounds access ~64 KiB past the head -- the same class fixed for one consumer in commit f5089008f90c ("macsec: do not read an unset MAC header in macsec_encrypt()"). packet_parse_headers() runs only on the transmit path, where skb->data points at the start of the L2 header for every packet-socket type regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC header unconditionally, mirroring __dev_queue_xmit(), so the frame is anchored on the bypass path too. Found by 0sec (https://0sec.ai) using automated source analysis; verified against source and matched to the macsec KASAN report in f5089008f90c. Compile-tested. | ||||
| CVE-2026-74681 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT endpoint size. Both are taken independently from different endpoints in usbio_probe(), so the check is wrong when they differ. Use rxbuf_len for the IN direction. This matches the buffer that actually holds the response data. | ||||
| CVE-2026-74682 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i < urb_ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by ctx->buffer_size, so only capture is affected. fmt_type comes from the device's audio streaming descriptors, so any device advertising a Type II capture format hits this once userspace sets hw_params on the stream. KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report per inbound transfer: BUG: KASAN: slab-out-of-bounds in dummy_timer Write of size 64 at addr ffff0000186171c0 by task cons02/166 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 166: usb_alloc_coherent snd_usb_endpoint_set_params The buggy address is located 0 bytes to the right of allocated 64-byte region [ffff000018617180, ffff0000186171c0) Compute buffer_size after the delimiter packet has been accounted for, and bound the fill loop by buffer_size, as prepare_silent_urb() already does on the outbound side. This grows every Type II URB allocation by one maxsize packet. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74687 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer. | ||||
| CVE-2026-74688 | 1 Linux | 1 Linux Kernel | 2026-08-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport. | ||||