Export limit exceeded: 23019 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23019 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop The cleanup loop was starting at the wrong array index, causing out-of-bounds access. Start the loop at the correct index for zero-indexed arrays to prevent accessing memory beyond the allocated array bounds. | ||||
| CVE-2025-40179 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: verify orphan file size is not too big In principle orphan file can be arbitrarily large. However orphan replay needs to traverse it all and we also pin all its buffers in memory. Thus filesystems with absurdly large orphan files can lead to big amounts of memory consumed. Limit orphan file size to a sane value and also use kvmalloc() for allocating array of block descriptor structures to avoid large order allocations for sane but large orphan files. | ||||
| CVE-2025-40177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix bootlog initialization ordering As soon as we queue MHI buffers to receive the bootlog from the device, we could be receiving data. Therefore all the resources needed to process that data need to be setup prior to queuing the buffers. We currently initialize some of the resources after queuing the buffers which creates a race between the probe() and any data that comes back from the device. If the uninitialized resources are accessed, we could see page faults. Fix the init ordering to close the race. | ||||
| CVE-2025-40160 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/events: Return -EEXIST for bound VIRQs Change find_virq() to return -EEXIST when a VIRQ is bound to a different CPU than the one passed in. With that, remove the BUG_ON() from bind_virq_to_irq() to propogate the error upwards. Some VIRQs are per-cpu, but others are per-domain or global. Those must be bound to CPU0 and can then migrate elsewhere. The lookup for per-domain and global will probably fail when migrated off CPU 0, especially when the current CPU is tracked. This now returns -EEXIST instead of BUG_ON(). A second call to bind a per-domain or global VIRQ is not expected, but make it non-fatal to avoid trying to look up the irq, since we don't know which per_cpu(virq_to_irq) it will be in. | ||||
| CVE-2025-40162 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails devm_kasprintf() may return NULL on memory allocation failure, but the debug message prints cpus->dai_name before checking it. Move the dev_dbg() call after the NULL check to prevent potential NULL pointer dereference. | ||||
| CVE-2025-40152 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix bootup splat with separate_gpu_drm modparam The drm_gem_for_each_gpuvm_bo() call from lookup_vma() accesses drm_gem_obj.gpuva.list, which is not initialized when the drm driver does not support DRIVER_GEM_GPUVA feature. Enable it for msm_kms drm driver to fix the splat seen when msm.separate_gpu_drm=1 modparam is set: [ 9.506020] Unable to handle kernel paging request at virtual address fffffffffffffff0 [ 9.523160] Mem abort info: [ 9.523161] ESR = 0x0000000096000006 [ 9.523163] EC = 0x25: DABT (current EL), IL = 32 bits [ 9.523165] SET = 0, FnV = 0 [ 9.523166] EA = 0, S1PTW = 0 [ 9.523167] FSC = 0x06: level 2 translation fault [ 9.523169] Data abort info: [ 9.523170] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 9.523171] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 9.523172] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 9.523174] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000ad370f000 [ 9.523176] [fffffffffffffff0] pgd=0000000000000000, p4d=0000000ad4787403, pud=0000000ad4788403, pmd=0000000000000000 [ 9.523184] Internal error: Oops: 0000000096000006 [#1] SMP [ 9.592968] CPU: 9 UID: 0 PID: 448 Comm: (udev-worker) Not tainted 6.17.0-rc4-assorted-fix-00005-g0e9bb53a2282-dirty #3 PREEMPT [ 9.592970] Hardware name: Qualcomm CRD, BIOS 6.0.240718.BOOT.MXF.2.4-00515-HAMOA-1 07/18/2024 [ 9.592971] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 9.592973] pc : lookup_vma+0x28/0xe0 [msm] [ 9.592996] lr : get_vma_locked+0x2c/0x128 [msm] [ 9.763632] sp : ffff800082dab460 [ 9.763666] Call trace: [ 9.763668] lookup_vma+0x28/0xe0 [msm] (P) [ 9.763688] get_vma_locked+0x2c/0x128 [msm] [ 9.763706] msm_gem_get_and_pin_iova_range+0x68/0x11c [msm] [ 9.763723] msm_gem_get_and_pin_iova+0x18/0x24 [msm] [ 9.763740] msm_fbdev_driver_fbdev_probe+0xd0/0x258 [msm] [ 9.763760] __drm_fb_helper_initial_config_and_unlock+0x288/0x528 [drm_kms_helper] [ 9.763771] drm_fb_helper_initial_config+0x44/0x54 [drm_kms_helper] [ 9.763779] drm_fbdev_client_hotplug+0x84/0xd4 [drm_client_lib] [ 9.763782] drm_client_register+0x58/0x9c [drm] [ 9.763806] drm_fbdev_client_setup+0xe8/0xcf0 [drm_client_lib] [ 9.763809] drm_client_setup+0xb4/0xd8 [drm_client_lib] [ 9.763811] msm_drm_kms_post_init+0x2c/0x3c [msm] [ 9.763830] msm_drm_init+0x1a8/0x22c [msm] [ 9.763848] msm_drm_bind+0x30/0x3c [msm] [ 9.919273] try_to_bring_up_aggregate_device+0x168/0x1d4 [ 9.919283] __component_add+0xa4/0x170 [ 9.919286] component_add+0x14/0x20 [ 9.919288] msm_dp_display_probe_tail+0x4c/0xac [msm] [ 9.919315] msm_dp_auxbus_done_probe+0x14/0x20 [msm] [ 9.919335] dp_aux_ep_probe+0x4c/0xf0 [drm_dp_aux_bus] [ 9.919341] really_probe+0xbc/0x298 [ 9.919345] __driver_probe_device+0x78/0x12c [ 9.919348] driver_probe_device+0x40/0x160 [ 9.919350] __driver_attach+0x94/0x19c [ 9.919353] bus_for_each_dev+0x74/0xd4 [ 9.919355] driver_attach+0x24/0x30 [ 9.919358] bus_add_driver+0xe4/0x208 [ 9.919360] driver_register+0x60/0x128 [ 9.919363] __dp_aux_dp_driver_register+0x24/0x30 [drm_dp_aux_bus] [ 9.919365] atana33xc20_init+0x20/0x1000 [panel_samsung_atna33xc20] [ 9.919370] do_one_initcall+0x6c/0x1b0 [ 9.919374] do_init_module+0x58/0x234 [ 9.919377] load_module+0x19cc/0x1bd4 [ 9.919380] init_module_from_file+0x84/0xc4 [ 9.919382] __arm64_sys_finit_module+0x1b8/0x2cc [ 9.919384] invoke_syscall+0x48/0x110 [ 9.919389] el0_svc_common.constprop.0+0xc8/0xe8 [ 9.919393] do_el0_svc+0x20/0x2c [ 9.919396] el0_svc+0x34/0xf0 [ 9.919401] el0t_64_sync_handler+0xa0/0xe4 [ 9.919403] el0t_64_sync+0x198/0x19c [ 9.919407] Code: eb0000bf 54000480 d100a003 aa0303e2 (f8418c44) [ 9.919410] ---[ end trace 0000000000000000 ]--- Patchwork: https://patchwork.freedesktop.org/pa ---truncated--- | ||||
| CVE-2025-40147 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-throttle: fix access race during throttle policy activation On repeated cold boots we occasionally hit a NULL pointer crash in blk_should_throtl() when throttling is consulted before the throttle policy is fully enabled for the queue. Checking only q->td != NULL is insufficient during early initialization, so blkg_to_pd() for the throttle policy can still return NULL and blkg_to_tg() becomes NULL, which later gets dereferenced. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000156 ... pc : submit_bio_noacct+0x14c/0x4c8 lr : submit_bio_noacct+0x48/0x4c8 sp : ffff800087f0b690 x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0 x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60 x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002 x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500 x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a Call trace: submit_bio_noacct+0x14c/0x4c8 verity_map+0x178/0x2c8 __map_bio+0x228/0x250 dm_submit_bio+0x1c4/0x678 __submit_bio+0x170/0x230 submit_bio_noacct_nocheck+0x16c/0x388 submit_bio_noacct+0x16c/0x4c8 submit_bio+0xb4/0x210 f2fs_submit_read_bio+0x4c/0xf0 f2fs_mpage_readpages+0x3b0/0x5f0 f2fs_readahead+0x90/0xe8 Tighten blk_throtl_activated() to also require that the throttle policy bit is set on the queue: return q->td != NULL && test_bit(blkcg_policy_throtl.plid, q->blkcg_pols); This prevents blk_should_throtl() from accessing throttle group state until policy data has been attached to blkgs. | ||||
| CVE-2025-40145 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure When devm_add_action_or_reset() fails, it calls the passed cleanup function. Hence the caller must not repeat that cleanup. Replace the "goto err_regulator_free" by the actual freeing, as there will never be a need again for a second user of this label. | ||||
| CVE-2022-50626 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: fix memory leak in dvb_usb_adapter_init() Syzbot reports a memory leak in "dvb_usb_adapter_init()". The leak is due to not accounting for and freeing current iteration's adapter->priv in case of an error. Currently if an error occurs, it will exit before incrementing "num_adapters_initalized", which is used as a reference counter to free all adap->priv in "dvb_usb_adapter_exit()". There are multiple error paths that can exit from before incrementing the counter. Including the error handling paths for "dvb_usb_adapter_stream_init()", "dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()" within "dvb_usb_adapter_init()". This means that in case of an error in any of these functions the current iteration is not accounted for and the current iteration's adap->priv is not freed. Fix this by freeing the current iteration's adap->priv in the "stream_init_err:" label in the error path. The rest of the (accounted for) adap->priv objects are freed in dvb_usb_adapter_exit() as expected using the num_adapters_initalized variable. Syzbot report: BUG: memory leak unreferenced object 0xffff8881172f1a00 (size 512): comm "kworker/0:2", pid 139, jiffies 4294994873 (age 10.960s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline] [<ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline] [<ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308 [<ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883 [<ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline] [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621 [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline] [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752 [<ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782 [<ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899 [<ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970 [<ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405 [<ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170 [<ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline] [<ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621 [<ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline] [<ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752 | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2025-40132 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback In create_sdw_dailink() check that sof_end->codec_info->add_sidecar is not NULL before calling it. The original code assumed that if include_sidecar is true, the codec on that link has an add_sidecar callback. But there could be other codecs on the same link that do not have an add_sidecar callback. | ||||
| CVE-2025-40131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because rxcb->peer_id is not updated with a valid value. This is expected in monitor mode, where RX frames bypass the regular RX descriptor path that typically sets rxcb->peer_id. As a result, the peer is NULL, and link_id and link_valid fields in the RX status are not populated. This leads to a WARN_ON in mac80211 when it receives data frame from an associated station with invalid link_id. Fix this potential issue by using ppduinfo->peer_id, which holds the correct peer id for the received frame. This ensures that the peer is correctly found and the associated link metadata is updated accordingly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-40126 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-40125 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx In __blk_mq_update_nr_hw_queues() the return value of blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx fails, later changing the number of hw_queues or removing disk will trigger the following warning: kernfs: can not remove 'nr_tags', no directory WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160 Call Trace: remove_files.isra.1+0x38/0xb0 sysfs_remove_group+0x4d/0x100 sysfs_remove_groups+0x31/0x60 __kobject_del+0x23/0xf0 kobject_del+0x17/0x40 blk_mq_unregister_hctx+0x5d/0x80 blk_mq_sysfs_unregister_hctxs+0x94/0xd0 blk_mq_update_nr_hw_queues+0x124/0x760 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x92/0x120 [null_blk] kobjct_del() was called unconditionally even if sysfs creation failed. Fix it by checkig the kobject creation statusbefore deleting it. | ||||
| CVE-2025-40121 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping When an invalid value is passed via quirk option, currently bytcr_rt5640 driver just ignores and leaves as is, which may lead to unepxected results like OOB access. This patch adds the sanity check and corrects the input mapping to the certain default value if an invalid value is passed. | ||||
| CVE-2025-40113 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere. | ||||
| CVE-2025-8066 | 2 Bunkerity, Linux | 2 Bunker Web, Linux | 2026-04-15 | N/A |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Bunkerity Bunker Web on Linux allows Phishing.This issue affects Bunker Web: 1.6.2. | ||||
| CVE-2022-50814 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr KASAN reported this Bug: [17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60 [17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958 ... [17619.698934] The buggy address belongs to the variable: [17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip] There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr. The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by param_get/set_int. Replacing param_get/set_int to param_get/set_ushort can fix this bug. | ||||
| CVE-2022-50815 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext2: Add sanity checks for group and filesystem size Add sanity check that filesystem size does not exceed the underlying device size and that group size is big enough so that metadata can fit into it. This avoid trying to mount some crafted filesystems with extremely large group counts. | ||||
| CVE-2022-50818 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix running_req for internal abort commands Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp(). | ||||