Export limit exceeded: 376569 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376569 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-62388 | 1 Nltk | 1 Nltk | 2026-08-29 | 7.5 High |
| NLTK versions before 3.10.0 default to ENFORCE=False in pathsec.py, causing all security validation functions to emit warnings instead of raising exceptions. Attackers can bypass path traversal and pickle deserialization protections by exploiting the disabled security controls that are only active when manually enabled. | ||||
| CVE-2026-56100 | 2026-08-29 | 8.1 High | ||
| SpringBlade versions from 2.7.3 up to but not including 5.0.0 contain a privilege escalation vulnerability that allows authenticated attackers to create system administrator accounts by sending crafted POST requests to an unprotected internal Feign user-creation endpoint exposed via @RestController without authorization checks. Attackers can exploit the gateway's authentication filter, which only validates JWT parsing without verifying user roles or caller identity, and leverage a hardcoded JWT signing key embedded in publicly available JARs to forge tokens and escalate privileges from a low-privilege user to administrator, enabling cross-tenant data pollution and persistent backdoor access. | ||||
| CVE-2026-80692 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-80702 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size Two sites in vmwgfx_resource.c assign boolean literals to res->guest_memory_size, which is an unsigned long allocation-size field; the intended target is the adjacent res->guest_memory_dirty bitfield. After the assignments the field holds 0 or 1 instead of the resource's MOB allocation size: - vmw_resource_release() writes 0 (false), and - vmw_resource_unbind_list() writes 1 (true). Subsequent revalidation paths read guest_memory_size when computing the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer allocation size (vmw_resource_buf_alloc()), producing zero-length walks or wrap-around ranges that read or write past the MOB bitmap. The dirty-tracking intent of the original code (mark the resource as dirtied since the last sync) is also lost, since guest_memory_dirty is never updated. Rename both assignments to guest_memory_dirty. | ||||
| CVE-2026-80707 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Zero the allocated buffer in j1939_session_fresh_new() to ensure it contains no residual data. While there is a potential performance impact if users allocate maximum sized ETP buffers, most real-world use cases are not noticeably affected since the maximum known buffer size is typically around 65K. [mkl: add Message-ID] | ||||
| CVE-2026-80599 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: ensure accessible eth_hdr proto field When batadv_get_vid() accesses the proto field of the ethernet header, it is not checking if the data itself is accessible. The caller is responsible for it. But in contrast to other call sites, batadv_dat_get_vid() and its caller didn't make sure this is true. This could have caused an out-of-bounds access. | ||||
| CVE-2026-80603 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read parse_dcc() treats data_end as an inclusive end pointer, but its only caller passes data_limit = ib_ptr + datalen, which points one past the last valid byte. The newline search loop iterates while tmp <= data_end, so when no newline is present, *tmp is read at tmp == data_end, one byte beyond the region filled by skb_header_pointer(). irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte is uninitialized or stale; if it contains an ASCII digit, simple_strtoul will consume it and produce a wrong DCC IP or port in the conntrack expectation. The extra allocation byte is also a fragile guard: if the cap or allocation size changes, this becomes a real out-of-bounds read. Change the loop and its post-loop check to use strict less-than, consistent with the caller's exclusive-end convention. Update the function comment accordingly. | ||||
| CVE-2026-80608 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix iommu domain lifetime race during device removal When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If amdxdna_gem_obj_free() is called after device removal, it may attempt to access xdna->domain, resulting in a use-after-free. Fix the race by adding freeing xdna->domain as a managed release action, so its lifetime is managed by DRM and remains valid until all managed resources are released. | ||||
| CVE-2026-80612 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: lwtunnel: Drop skb metadata before LWT encapsulation skb metadata is meant for passing information between XDP and TC. It lives in the skb headroom, immediately before skb->data. LWT programs cannot access the __sk_buff->data_meta pseudo-pointer to metadata. However, LWT encapsulation prepends outer headers, moving skb->data back over the headroom where the metadata sits. On an RX-originated (forwarded) packet that still carries XDP metadata this goes wrong in two different ways, depending on the encap type: 1. Non-BPF LWT encaps (mpls, seg6, ioam6 ...) call skb_push()/skb_pull() and silently overwrite the metadata that sits in the headroom. 2) BPF LWT xmit calls bpf_skb_change_head(), which uses skb_data_move(). That helper expects metadata immediately before skb->data. But since the IP output path runs LWT xmit before neighbour output has built the outgoing L2 header, for forwarded packets skb->data points at the L3 header while skb_mac_header() still points at the old L2 header. skb_data_move() sees metadata ending at skb_mac_header(), not before skb->data, warns and clears metadata: WARNING: CPU: 21 PID: 454557 at include/linux/skbuff.h:4609 skb_data_move+0x47/0x90 CPU: 21 UID: 0 PID: 454557 Comm: napi/iconduit-g Tainted: G O 6.18.21 #1 RIP: 0010:skb_data_move+0x47/0x90 Call Trace: <IRQ> bpf_skb_change_head+0xe6/0x1a0 bpf_prog_...+0x213/0x2e3 run_lwt_bpf.isra.0+0x1d3/0x360 bpf_xmit+0x46/0xe0 lwtunnel_xmit+0xa1/0xf0 ip_finish_output2+0x1e7/0x5e0 ip_output+0x63/0x100 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x2b/0x190 net_rx_action+0x40b/0x7f0 handle_softirqs+0xd2/0x270 do_softirq+0x3f/0x60 </IRQ> That is what happens, as for how to fix it - a received packet that carries metadata can reach an encap through any of the three LWT redirect modes: LWTUNNEL_STATE_INPUT_REDIRECT ip6_rcv_finish dst_input lwtunnel_input LWTUNNEL_STATE_OUTPUT_REDIRECT ip6_rcv_finish dst_input ip6_forward ip6_forward_finish dst_output lwtunnel_output LWTUNNEL_STATE_XMIT_REDIRECT ip6_rcv_finish dst_input ip6_forward ip6_forward_finish dst_output ip6_output ip6_finish_output ip6_finish_output2 lwtunnel_xmit Every encap funnels through the three LWT dispatch helpers, so drop the metadata there, right before handing the skb to the encap op. This single chokepoint covers all encap types and all three redirect modes: - lwtunnel_input(): seg6, rpl, ila, seg6_local - lwtunnel_output(): ioam6 - lwtunnel_xmit(): mpls, LWT BPF xmit Alternatively, we could clear the metadata right after TC ingress hook. That would require a compromise, however. Metadata would become inaccessible from TC egress (in setups where it actually reaches the hook it tact, that is without any L2 tunnels on path). | ||||
| CVE-2026-80613 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: veth: fix NAPI leak in XDP enable error path During XDP enablement in veth, if xdp_rxq_info_reg() or xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes. However, the rollback loop: for (i--; i >= start; i--) { decrements the loop index 'i' before the first iteration. This correctly skips unregistering the rxq for the failed index 'i' (as registration failed or was already cleaned up), but it also erroneously skips calling netif_napi_deli() for rq[i].xdp_napi. Since netif_napi_add() was already called for index 'i', this leaves a dangling napi_struct in the device's napi_list. When the veth device is later destroyed, the freed queue memory (which contains the leaked NAPI structure) can be reused. The subsequent device teardown iterates the NAPI list and corrupts the reallocated memory, leading to UAF. Fix this by explicitly deleting the NAPI association for the failed index 'i' before rolling back the successfully configured queues. | ||||
| CVE-2026-80614 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: emac: Fix NULL pointer dereference in emac_probe Move devm_request_irq() after devm_platform_ioremap_resource() so that dev->emacp is mapped before the interrupt handler can fire. An early interrupt hitting emac_irq() would dereference the NULL dev->emacp and crash. Also remove redundant error message. devm_platform_ioremap_resource() already returns an error message with dev_err_probe(). | ||||
| CVE-2026-80684 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix NULL dereference on AIBV allocation failure The airq_iv_create() can return NULL on failure, but the return value was never checked. If it fails, zdev->aibv will be NULL and fail when dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the previously allocated AISB bit and zdev->aisb on failure. | ||||
| CVE-2026-82364 | 1 Macrozheng | 1 Mall | 2026-08-29 | 4.2 Medium |
| A security vulnerability has been detected in macrozheng mall up to 1.0.3. This impacts an unknown function of the file /order/submit of the component Order Submission. The manipulation leads to race condition. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The vendor deleted the GitHub issue for this vulnerability without and explanation. | ||||
| CVE-2026-80693 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: idpf: bound interrupt-vector register fill to the allocated array idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding its inner loop only by the per-chunk num_vectors. The array is sized separately: idpf_intr_reg_init() allocates kzalloc_objs(struct idpf_vec_regs, total_vecs) from caps.num_allocated_vectors and only checks the returned count after the fill. The sum of per-chunk num_vectors is never reconciled against total_vecs, so a reply with a small num_allocated_vectors but chunks summing higher writes past the end of reg_vals[]. Impact: a control plane (a PF or hypervisor device model) that returns a VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds num_allocated_vectors writes struct idpf_vec_regs entries past the end of the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write). Bound the fill loop to the array capacity passed in by the callers, mirroring the sibling idpf_vport_get_q_reg(). The existing num_regs < num_vecs check then rejects an undersized reply without the out-of-bounds write happening first. | ||||
| CVE-2026-80706 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide offset for generic DPRAM records and validate the application staging span against the mapped DPRAM before copying. | ||||
| CVE-2026-80712 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: write the feature value before executing SET_FEATURE qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits the descriptors, which makes the controller execute the command immediately. For SPINAND_SET_FEATURE the value to be written is only placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a second submission - so the chip is programmed with whatever that register happened to hold from a previous operation, and the intended value is only applied by the *next* SET_FEATURE. Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing 0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the subsequent write of 0x00 leaves it at 0x40 - every write lands one operation late. This stayed unnoticed until v6.18 added SPI-NAND OTP support together with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode, reads, and disables it again, and mtd_otp_nvmem_add() does this during MTD registration. With the off-by-one, the "disable" write actually applies the previously requested value, so CFG_OTP_ENABLE ends up set: the chip stays in OTP mode, every subsequent array read returns the OTP area instead of the array (UBI reports an empty device) and all writes fail with -EIO because the OTP area is write protected. On this board that makes the whole flash unusable and the device unbootable. Write the feature value into NAND_FLASH_FEATURES as part of the same transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the operation actually carries - the previous code dereferenced a 4-byte pointer on a one-byte buffer (spinand->scratchbuf). With this patch the flash contents read back bit-identical to a known-good dump of the same board taken under the vendor firmware (md5-verified across partitions), and writes work. | ||||
| CVE-2026-80609 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix out-of-bounds check for cqe->len_list[] Move index check before element access. | ||||
| CVE-2026-80622 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: char: tlclk: fix use-after-free in tlclk_cleanup() This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases, this patch: - Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module unloading while the device is in use. - Updates tlclk_cleanup() to explicitly wake up all blocked readers (wake_up_all), properly release hardware I/O regions, and safely delete the timer (timer_delete_sync) prior to freeing memory. | ||||
| CVE-2026-80646 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: guard against possible NULL deref in __in6_dev_stats_get() dev_get_by_index_rcu() could return NULL if the original physical device is unregistered. Found by Sashiko. | ||||
| CVE-2026-80656 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: Add a sanity check for btree node size Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image, during the file system mounting process, specifically while loading the catalog, a corrupted node_size value of 1 caused the rec_off argument passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively large. Consequently, the function failed to return a valid value to initialize the off variable, triggering the bug [1]. Every node starts from BTree node descriptor: struct hfs_bnode_desc. So, the size of node cannot be lesser than that. However, technical specification declares that: "The node size (which is expressed in bytes) must be power of two, from 512 through 32,768, inclusive." Add a check for btree node size base on technical specification. [1] BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584 hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584 hfsplus_btree_open+0x169a/0x1e40 fs/hfsplus/btree.c:382 hfsplus_fill_super+0x111f/0x2770 fs/hfsplus/super.c:553 get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694 get_tree_bdev+0x38/0x50 fs/super.c:1717 hfsplus_get_tree+0x35/0x40 fs/hfsplus/super.c:709 vfs_get_tree+0xb3/0x5d0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] | ||||