Export limit exceeded: 41104 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (41104 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-7076 | 1 Itsourcecode | 1 Courier Management System | 2026-04-27 | 7.3 High |
| A vulnerability was determined in itsourcecode Courier Management System 1.0. Impacted is an unknown function of the file /edit_branch.php. Executing a manipulation of the argument ID can lead to sql injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2026-31644 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix use-after-free and leak in lan966x_fdma_reload() When lan966x_fdma_reload() fails to allocate new RX buffers, the restore path restarts DMA using old descriptors whose pages were already freed via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can release pages back to the buddy allocator, the hardware may DMA into memory now owned by other kernel subsystems. Additionally, on the restore path, the newly created page pool (if allocation partially succeeded) is overwritten without being destroyed, leaking it. Fix both issues by deferring the release of old pages until after the new allocation succeeds. Save the old page array before the allocation so old pages can be freed on the success path. On the failure path, the old descriptors, pages and page pool are all still valid, making the restore safe. Also ensure the restore path re-enables NAPI and wakes the netdev, matching the success path. | ||||
| CVE-2026-31647 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling Switch from using the completion's raw spinlock to a local lock in the idpf_vc_xn struct. The conversion is safe because complete/_all() are called outside the lock and there is no reason to share the completion lock in the current logic. This avoids invalid wait context reported by the kernel due to the async handler taking BH spinlock: [ 805.726977] ============================= [ 805.726991] [ BUG: Invalid wait context ] [ 805.727006] 7.0.0-rc2-net-devq-031026+ #28 Tainted: G S OE [ 805.727026] ----------------------------- [ 805.727038] kworker/u261:0/572 is trying to lock: [ 805.727051] ff190da6a8dbb6a0 (&vport_config->mac_filter_list_lock){+...}-{3:3}, at: idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727099] other info that might help us debug this: [ 805.727111] context-{5:5} [ 805.727119] 3 locks held by kworker/u261:0/572: [ 805.727132] #0: ff190da6db3e6148 ((wq_completion)idpf-0000:83:00.0-mbx){+.+.}-{0:0}, at: process_one_work+0x4b5/0x730 [ 805.727163] #1: ff3c6f0a6131fe50 ((work_completion)(&(&adapter->mbx_task)->work)){+.+.}-{0:0}, at: process_one_work+0x1e5/0x730 [ 805.727191] #2: ff190da765190020 (&x->wait#34){+.+.}-{2:2}, at: idpf_recv_mb_msg+0xc8/0x710 [idpf] [ 805.727218] stack backtrace: ... [ 805.727238] Workqueue: idpf-0000:83:00.0-mbx idpf_mbx_task [idpf] [ 805.727247] Call Trace: [ 805.727249] <TASK> [ 805.727251] dump_stack_lvl+0x77/0xb0 [ 805.727259] __lock_acquire+0xb3b/0x2290 [ 805.727268] ? __irq_work_queue_local+0x59/0x130 [ 805.727275] lock_acquire+0xc6/0x2f0 [ 805.727277] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727284] ? _printk+0x5b/0x80 [ 805.727290] _raw_spin_lock_bh+0x38/0x50 [ 805.727298] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727303] idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727310] idpf_recv_mb_msg+0x1c8/0x710 [idpf] [ 805.727317] process_one_work+0x226/0x730 [ 805.727322] worker_thread+0x19e/0x340 [ 805.727325] ? __pfx_worker_thread+0x10/0x10 [ 805.727328] kthread+0xf4/0x130 [ 805.727333] ? __pfx_kthread+0x10/0x10 [ 805.727336] ret_from_fork+0x32c/0x410 [ 805.727345] ? __pfx_kthread+0x10/0x10 [ 805.727347] ret_from_fork_asm+0x1a/0x30 [ 805.727354] </TASK> | ||||
| CVE-2026-31550 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: bcm: bcm2835-power: Increase ASB control timeout The bcm2835_asb_control() function uses a tight polling loop to wait for the ASB bridge to acknowledge a request. During intensive workloads, this handshake intermittently fails for V3D's master ASB on BCM2711, resulting in "Failed to disable ASB master for v3d" errors during runtime PM suspend. As a consequence, the failed power-off leaves V3D in a broken state, leading to bus faults or system hangs on later accesses. As the timeout is insufficient in some scenarios, increase the polling timeout from 1us to 5us, which is still negligible in the context of a power domain transition. Also, replace the open-coded ktime_get_ns()/ cpu_relax() polling loop with readl_poll_timeout_atomic(). | ||||
| CVE-2026-31552 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push"), wl1271_tx_allocate() and with it wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails. However, in wlcore_tx_work_locked(), a return value of -EAGAIN from wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being full. This causes the code to flush the buffer, put the skb back at the head of the queue, and immediately retry the same skb in a tight while loop. Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens immediately with GFP_ATOMIC, this will result in an infinite loop and a CPU soft lockup. Return -ENOMEM instead so the packet is dropped and the loop terminates. The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y. | ||||
| CVE-2026-31554 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM found it was possible to create a UaF when sys_futex_requeue() is used with different flags. The initial motivation for allowing different flags was the variable sized futex, but since that hasn't been merged (yet), simply mandate the flags are identical, as is the case for the old style sys_futex() requeue operations. | ||||
| CVE-2026-31555 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING *exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) *uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi. | ||||
| CVE-2026-31557 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq. | ||||
| CVE-2026-31558 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this case so as to make it more robust. This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. | ||||
| CVE-2026-31668 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: seg6: separate dst_cache for input and output paths in seg6 lwtunnel The seg6 lwtunnel uses a single dst_cache per encap route, shared between seg6_input_core() and seg6_output_core(). These two paths can perform the post-encap SID lookup in different routing contexts (e.g., ip rules matching on the ingress interface, or VRF table separation). Whichever path runs first populates the cache, and the other reuses it blindly, bypassing its own lookup. Fix this by splitting the cache into cache_input and cache_output, so each path maintains its own cached dst independently. | ||||
| CVE-2026-31667 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) | ||||
| CVE-2026-6760 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-04-27 | 9.8 Critical |
| Mitigation bypass in the Networking: Cookies component. This vulnerability was fixed in Firefox 150 and Thunderbird 150. | ||||
| CVE-2026-31665 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0 | ||||
| CVE-2026-41167 | 1 Cyfershepard | 1 Jellystat | 2026-04-27 | 9.1 Critical |
| Jellystat is a free and open source Statistics App for Jellyfin. Prior to version 1.1.10, multiple API endpoints in Jellystat build SQL queries by interpolating unsanitized request-body fields directly into raw SQL strings. An authenticated user can inject arbitrary SQL via `POST /api/getUserDetails` and `POST /api/getLibrary`, enabling full read of any table in the database - including `app_config`, which stores the Jellystat admin credentials, the Jellyfin API key, and the Jellyfin host URL. Because the vulnerable call site dispatches via `node-postgres`'s simple query protocol (no parameter array is passed), stacked queries are allowed, which escalates the injection from data disclosure to arbitrary command execution on the PostgreSQL host via `COPY ... TO PROGRAM`. Under the role shipped by the project's `docker-compose.yml` (a PostgreSQL superuser), no additional privileges are required to reach the RCE primitive. Version 1.1.10 contains a fix. | ||||
| CVE-2026-41248 | 1 Clerk | 4 Astro, Nextjs, Nuxt and 1 more | 2026-04-27 | 9.1 Critical |
| Clerk JavaScript is the official JavaScript repository for Clerk authentication. createRouteMatcher in @clerk/nextjs, @clerk/nuxt, and @clerk/astro can be bypassed by certain crafted requests, allowing them to skip middleware gating and reach downstream handlers. This vulnerability is fixed in @clerk/astro 1.5.7, 2.17.10, and 3.0.15; @clerk/nextjs 5.7.6, 6.39.2, and 7.2.1; @clerk/nuxt 1.13.28 and 2.2.2; and @clerk/shared 2.22.1, 3.47.4, anc 4.8.1 | ||||
| CVE-2026-6982 | 2 Showdoc, Star7th | 2 Showdoc, Showdoc | 2026-04-27 | 6.3 Medium |
| A vulnerability was determined in star7th ShowDoc up to 2.10.10/3.6.2/3.8.0. Affected by this vulnerability is an unknown functionality of the file server/Application/Api/Controller/PageController.class.PHP of the component API Page Sort Endpoint. Executing a manipulation of the argument pages can lead to sql injection. The attack may be launched remotely. Upgrading to version 3.8.1 addresses this issue. It is suggested to upgrade the affected component. According to the researcher, "[t]he vendor explicitly stated they will not backport patches to the older affected versions." | ||||
| CVE-2026-7060 | 1 Liyupi | 1 Yu-picture | 2026-04-27 | 7.3 High |
| A vulnerability was determined in liyupi yu-picture up to a053632c41340152bf75b66b3c543d129123d8ec. This impacts the function PageRequest of the file yu-picture-backend/src/main/java/com/yupi/yupicturebackend/service/impl/PictureServiceImpl.java of the component MyBatis-Plus. Executing a manipulation of the argument sortField can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. Applying a patch is advised to resolve this issue. The project was informed of the problem early through a pull request but has not reacted yet. | ||||
| CVE-2026-7083 | 1 Likeadmin-likeshop | 1 Likeadmin Php | 2026-04-27 | 4.7 Medium |
| A vulnerability has been found in likeadmin-likeshop likeadmin_php up to 1.9.6. Affected by this issue is the function queryResult of the file server\app\adminapi\lists\tools\DataTableLists.php of the component dataTable Admin API. The manipulation leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-40574 | 1 Oauth2 Proxy Project | 1 Oauth2 Proxy | 2026-04-27 | 6.8 Medium |
| OAuth2 Proxy is a reverse proxy that provides authentication using OAuth2 providers. Prior to 7.15.2, an authorization bypass exists in OAuth2 Proxy as part of the email_domain enforcement option. An attacker may be able to authenticate with an email claim such as attacker@evil.com@company.com and satisfy an allowed domain check for company.com, even though the claim is not a valid email address. The issue ONLY affects deployments that rely on email_domain restrictions and accept email claim values from identity providers or claim mappings that do not strictly enforce normal email syntax. This vulnerability is fixed in 7.15.2. | ||||
| CVE-2025-69027 | 2 Tychesoftwares, Wordpress | 2 Product Delivery Date For Woocommerce Lite, Wordpress | 2026-04-27 | 5.3 Medium |
| Missing Authorization vulnerability in tychesoftwares Product Delivery Date for WooCommerce – Lite product-delivery-date-for-woocommerce-lite allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Product Delivery Date for WooCommerce – Lite: from n/a through <= 3.2.0. | ||||