Export limit exceeded: 372779 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 372779 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372779 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-44488 | 1 Axios | 1 Axios | 2026-08-20 | 7.5 High |
| Axios is a promise based HTTP client for the browser and Node.js. Axios versions 1.7.0 through 1.15.x did not enforce configured request and response size limits when requests were sent with the fetch adapter. Applications that selected adapter: 'fetch', or ran in environments where axios resolved to the fetch adapter, could receive or send bodies larger than maxContentLength or maxBodyLength despite those limits being explicitly configured. This can cause resource exhaustion in server-side usage when a malicious or compromised server returns an oversized response, when an attacker can supply a large data: URL, or when an application forwards attacker-controlled request bodies through axios while relying on maxBodyLength as a boundary. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2026-44487 | 1 Axios | 1 Axios | 2026-08-20 | 7.5 High |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’s Node.js HTTP adapter may forward a Proxy-Authorization header to a redirected origin during specific proxy-to-direct redirect flows. This affects Node.js usage, where an initial HTTP request is sent through an authenticated HTTP proxy, redirects are followed, and the redirected URL is no longer proxied. Under affected redirect shapes, the final origin can receive the proxy credential that was intended only for the outbound proxy. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2026-44486 | 1 Axios | 1 Axios | 2026-08-20 | 7.5 High |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, Axios’ Node.js HTTP adapter can leak proxy credentials to a redirect target in affected versions. When a request is sent through an authenticated proxy, Axios may add a Proxy-Authorization header. If Axios then follows a redirect and the redirected request is no longer sent through that proxy, the stale Proxy-Authorization header can remain on the redirected request and be sent to the redirect target. This affects Node.js's use of Axios with automatic redirects enabled and an authenticated proxy configuration. Browser adapters are not affected. This vulnerability is fixed in 0.32.0 and 1.16.0. | ||||
| CVE-2026-44293 | 2 Protobuf, Protobufjs Project | 2 Protobuf, Protobufjs | 2026-08-20 | 8.8 High |
| protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.5.6 and 8.0.2, protobufjs generated JavaScript for toObject conversion could include an unsafe expression derived from a schema-controlled bytes field default value. A crafted descriptor with a non-string default value for a bytes field could cause attacker-controlled code to be emitted into the generated conversion function. This vulnerability is fixed in 7.5.6 and 8.0.2. | ||||
| CVE-2026-44249 | 1 Netty | 1 Netty | 2026-08-20 | 8.1 High |
| Netty is a network application framework for development of protocol servers and clients. In netty-handler prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can bypass IPv6 subnet rules due to an incorrect masking operation in IpSubnetFilterRule.compareTo(). Valid public IP addresses can bypass the restrictions. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-43964 | 1 Postfix | 1 Postfix | 2026-08-20 | 3.7 Low |
| Postfix before 3.8.16, 3.9 before 3.9.10, and 3.10 before 3.10.9 sometimes allows a buffer over-read and process crash via an enhanced status code that lacks text after the third number. | ||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-08-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | ||||
| CVE-2026-43125 | 1 Linux | 1 Linux Kernel | 2026-08-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dlm: validate length in dlm_search_rsb_tree The len parameter in dlm_dump_rsb_name() is not validated and comes from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can cause out-of-bounds write in dlm_search_rsb_tree(). Add length validation to prevent potential buffer overflow. | ||||
| CVE-2026-43038 | 1 Linux | 1 Linux Kernel | 2026-08-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway. | ||||
| CVE-2026-42508 | 1 Golang | 2 Crypto, Ssh | 2026-08-20 | 9.1 Critical |
| Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked. | ||||
| CVE-2026-42499 | 2 Go Standard Library, Golang | 2 Net\/mail, Go | 2026-08-20 | 7.5 High |
| Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322. | ||||
| CVE-2026-42338 | 1 Beaugunderson | 1 Ip-address | 2026-08-20 | 6.1 Medium |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.1.1, Address6.group() and Address6.link() do not HTML-escape attacker-controlled content before embedding it in the HTML strings they return, and AddressError.parseMessage (emitted by the Address6 constructor for invalid input) can contain unescaped attacker-controlled content in one branch. An application that (1) passes untrusted input to Address6 and (2) renders the output of these methods, or the thrown error's parseMessage, as HTML (e.g. via innerHTML) is vulnerable to cross-site scripting. This vulnerability is fixed in 10.1.1. | ||||
| CVE-2026-42151 | 1 Prometheus | 1 Prometheus | 2026-08-20 | 7.5 High |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3. | ||||
| CVE-2026-41523 | 2 Vllm, Vllm-project | 2 Vllm, Vllm | 2026-08-20 | 7.5 High |
| vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.22.0, an assert-based security check in vLLM's activation function loading allows any unauthenticated attacker to achieve arbitrary code execution on the server by publishing a malicious HuggingFace model, when vLLM runs in Python optimized mode (python -O or PYTHONOPTIMIZE=1). This vulnerability is fixed in 0.22.0. | ||||
| CVE-2026-3039 | 2 Isc, Redhat | 2 Bind, Hummingbird | 2026-08-20 | 7.5 High |
| BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments. This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. | ||||
| CVE-2026-39835 | 1 Golang | 2 Crypto, Ssh | 2026-08-20 | 5.3 Medium |
| SSH servers which use CertChecker as a public key callback without setting IsUserAuthority or IsHostAuthority could be caused to panic by a client presenting a certificate. CertChecker now returns an error instead of panicking when these callbacks are nil. | ||||
| CVE-2026-39832 | 1 Golang | 2 Crypto, Ssh | 2026-08-20 | 9.1 Critical |
| When adding a key to a remote agent constraint extensions such as restrict-destination-v00@openssh.com were not serialized in the request. Destination restrictions were silently stripped when forwarding keys, allowing unrestricted use of the key on the remote host. The client now serializes all constraint extensions. Additionally, the in-memory keyring returned by NewKeyring() now rejects keys with unsupported constraint extensions instead of silently ignoring them. | ||||
| CVE-2026-56748 | 1 Cribl | 1 Cribl Stream | 2026-08-20 | 8.8 High |
| Improper validation of symbolic links in the Pack Git import feature in Cribl Stream before 4.18.2 allows a remote authenticated attacker with Pack import and pipeline preview permissions to execute arbitrary code as the Cribl server process via a crafted Git repository containing a symbolic link in the pack's functions directory. | ||||
| CVE-2026-39830 | 1 Golang | 2 Crypto, Ssh | 2026-08-20 | 9.1 Critical |
| A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited global responses are now discarded. | ||||
| CVE-2026-39829 | 1 Golang | 2 Crypto, Ssh | 2026-08-20 | 7.5 High |
| The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by unauthenticated clients during public key authentication. RSA moduli are now limited to 8192 bits, and DSA parameters are validated per FIPS 186-2. | ||||