Export limit exceeded: 27251 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (27251 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72198 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject non-resident records for resident-only attributes The shared lookup-time attribute validator rejects non-resident $FILE_NAME and $VOLUME_NAME records because their formats require resident values and callers handle returned records as resident attributes. Other resident-only attribute types still pass through the generic non-resident mapping-pairs checks. That leaves real resident/non-resident union confusion paths. Inode load looks up $STANDARD_INFORMATION and then reads data.resident.value_offset without checking a->non_resident. ntfs_inode_sync_standard_information() does the same when updating the standard information value. ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and index.c depend on the same lookup contract before consuming the resident index root value. Reject non-resident records for all resident-only attribute types in the shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior, but factor it through a helper and extend it to $STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and $EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract hardening for resident-only formats; this patch only rejects the non-resident form and does not add new resident value validation for those types. | ||||
| CVE-2026-72199 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate resident index root values on lookup Resident $INDEX_ROOT values carry index header fields that callers consume after lookup. Some callers already validate parts of the layout before walking entries, but those checks are scattered and do not cover all root header invariants, such as entries_offset alignment and lower bound, index_length, and allocated_size consistency. The resident root resize paths now keep these header fields consistent while the value size changes: ntfs_ir_truncate() lowers index.allocated_size before shrinking the resident value, and ntfs_ir_reparent() grows the resident value before publishing a larger root header. Lookup-time validation can therefore cover these invariants without tripping over the driver's own resize paths. Add $INDEX_ROOT to the minimum resident value size table and validate the resident index header fields before returning the attribute from lookup. Require 8-byte aligned index header fields, a sane entries_offset, an index_length within allocated_size, allocated_size within the resident value, and enough entry space for at least an index entry header. The shared validator already rejects non-resident records for resident-only attribute types, including $INDEX_ROOT. | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||
| CVE-2026-72114 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME. | ||||
| CVE-2026-72132 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Charge unstable writes by request size, not folio size nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per *request* added to or removed from a commit list. This is correct only when a folio has a single associated request. When pg_test splits a folio into N sub-folio requests (e.g. pNFS flexfiles striping with a stripe unit smaller than the folio size, or plain wsize-limited splitting), each of the N requests independently charges the whole folio's page count, inflating the accounting by a factor of N per folio. With large folios and small stripe units this reaches multiple orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can charge up to 512x its real size, pushing global dirty+writeback accounting past the system's dirty threshold and forcing every buffered writer on the host into the hard-throttle path, including unrelated in-kernel NFS server threads sharing the box. Charge each request only for the pages it actually covers. | ||||
| CVE-2026-72074 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix type confusion in CDC union descriptor parsing The driver currently trusts the bMasterInterface0 from the CDC union descriptor without verifying that it matches the interface being probed. This could lead to the driver overwriting the private data of another interface. Validate that the control interface found in the descriptor is indeed the one we are probing. | ||||
| CVE-2026-72021 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset. | ||||
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-72045 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block. | ||||
| CVE-2026-16541 | 2026-08-15 | N/A | ||
| The Simply Schedule Appointments WordPress plugin before 1.6.12.17 does not restrict the user records returned by some of its REST endpoints to those the requester is entitled to see, allowing users with a low-privileged staff role to disclose the names and email addresses of arbitrary registered users. | ||||
| CVE-2026-12128 | 2026-08-15 | 5.3 Medium | ||
| The Pinpoint Booking System – Version 2 plugin for WordPress is vulnerable to Price Manipulation via the `cart_data` parameter in all versions up to, and including, 2.9.9.6.8. This is due to the `dopbsp_woocommerce_add_to_cart` AJAX action being registered via `wp_ajax_nopriv_*` with no authentication, no nonce verification, and no server-side recalculation of pricing — the `update` handler reads `price_total` directly from the attacker-controlled `cart_data` POST parameter and persists it to the database via `$wpdb->insert()` without validating it against the calendar's configured pricing. The `woocommerce_before_calculate_totals` callback subsequently reads the stored attacker-supplied value back from the database and passes it directly to `$product->set_price()` without recomputing from calendar settings. This makes it possible for unauthenticated attackers to override the WooCommerce checkout price of any bookable product tied to a booking calendar to an arbitrary value, effectively enabling the purchase of any such product at a self-chosen price. | ||||
| CVE-2026-73409 | 1 Budibase | 1 Budibase | 2026-08-14 | N/A |
| Budibase is an open-source low-code platform. Prior to 3.40.1, packages/server/src/integrations/mongodb.ts passed builder-controlled tlsCertificateKeyFile and tlsCAFile values directly to MongoClient on Budibase Cloud. A builder could submit absolute server paths through /api/datasources/verify and distinguish readable existing files from missing files by comparing the driver error, exposing a filesystem existence and readability oracle on the shared server. This issue is fixed in version 3.40.1. | ||||
| CVE-2026-20303 | 1 Cisco | 2 Catalyst Sd-wan Manager, Cisco Catalyst Sd-wan Controller | 2026-08-14 | 9.9 Critical |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Catalyst SD-WAN engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20303 are related to improper input validation issues that are grouped under the Common Weakness Enumeration (CWE) CWE-20. | ||||
| CVE-2026-20273 | 1 Cisco | 1 Ios Xe Software | 2026-08-14 | 8.6 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20273 are related to improper input validation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20. | ||||
| CVE-2026-20153 | 1 Cisco | 3 Cisco Roomos Software, Roomos, Roomos Cloud | 2026-08-14 | 7.5 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20153 are related to improper input validation that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20. | ||||
| CVE-2026-58442 | 1 Gitea | 1 Gitea Open Source Git Server | 2026-08-14 | 6.5 Medium |
| Repository migration SSRF via multi-answer DNS allow-list bypass | ||||
| CVE-2026-58432 | 1 Gitea | 1 Gitea Open Source Git Server | 2026-08-14 | 5.9 Medium |
| Missing Authorization and Authorization Bypass Through User-Controlled Key and Incorrect Permission Assignment for Critical Resource and Exposure of Sensitive Information to an Unauthorized Actor in code.gitea.io/gitea | ||||
| CVE-2026-58434 | 1 Gitea | 1 Gitea Open Source Git Server | 2026-08-14 | 7.5 High |
| Private Repository Metadata Remains Accessible After Access Revocation | ||||
| CVE-2026-50105 | 1 Gitea | 1 Gitea Open Source Git Server | 2026-08-14 | 4.3 Medium |
| RSS/Atom feed handlers bypass API-token scope & public-only confinement (incomplete fix of #37698) | ||||
| CVE-2026-55982 | 1 Gitea | 1 Gitea Open Source Git Server | 2026-08-14 | 9.1 Critical |
| OIDC userinfo Endpoint Returns Identity Claims Without Enforcing API Token Scopes | ||||