Export limit exceeded: 39874 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (39874 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72070 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix use-after-free in lbtf_free_adapter() lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does not wait for a running command_timer_fn() callback. lbtf_free_adapter() runs on the teardown path right before ieee80211_free_hw() frees priv, both in lbtf_remove_card() and in the probe error path. command_timer is armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent. command_timer_fn() dereferences priv. If a command times out as the device is removed, command_timer_fn() runs concurrently with teardown and dereferences priv after it has been freed. This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas: fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas driver. The libertas_tf variant has the identical pattern and was left unchanged. Use timer_delete_sync() so any in-flight callback completes before priv is freed. | ||||
| CVE-2026-72047 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers. | ||||
| CVE-2026-72028 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: probes: save original sp in rethook trampoline Reading a word from the stack in a kretprobe crashes a risc-v kernel. $ cd /sys/kernel/tracing/ $ echo 'r n_tty_write $stack0' > dynamic_events $ echo 1 > events/kprobes/enable Unable to handle kernel paging request at virtual address 0000000200000128 ... [<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38 [<ffffffff80177196>] process_fetch_insn+0x3ee/0x760 [<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0 [<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58 [<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90 [<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108 [<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c [<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94 [<ffffffff8067872a>] tty_write+0x1a/0x30 In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value. arch_rethook_trampoline saves the registers from the probed function in a struct pt_regs. sp is not saved. Instead, sp is decremented for arch_rethook_trampoline's local stack. Fix this crash and save the original sp along with the other registers. Use a0 as a temporary register, it is overwritten anyway. [pjw@kernel.org: added Fixes tag; cc'ed stable] | ||||
| CVE-2026-68460 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G ---truncated--- | ||||
| CVE-2026-68459 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs() When we mount device w/ gc_merge mount option, we may suffer below potential deadlock: Kworker GC trehad Truncator - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback --- set writeback flag on folio - f2fs_outplace_write_data : cached folio in internal bio cache - f2fs_balance_fs - wake_up(gc_thread) : wake up gc thread to run foreground GC - finish_wait(fggc_wq) : wait on the waitqueue --- wait on GC thread to finish the work - truncate_inode_pages_range - __filemap_get_folio(, FGP_LOCK) --- lock folio - truncate_inode_partial_folio - folio_wait_writeback --- wait on writeback being cleared - do_garbage_collect - move_data_page - f2fs_get_lock_data_folio - lock on folio --- blocked on folio's lock In order to avoid such deadlock, let's call below functions to commit cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did in NOGC_MERGE path. - f2fs_submit_merged_write(sbi, DATA); - f2fs_submit_all_merged_ipu_writes(sbi); | ||||
| CVE-2026-19973 | 1 Itsourcecode | 1 Hospital Management System | 2026-08-17 | 6.3 Medium |
| A vulnerability was found in itsourcecode Hospital Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /viewpaymentreport.php. Performing a manipulation of the argument delid results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-11973 | 2 Wordpress, Wplab | 2 Wordpress, Wp-lister Lite For Ebay | 2026-08-16 | 4.9 Medium |
| The WP-Lister Lite for eBay plugin for WordPress is vulnerable to generic SQL Injection via the 'orderby' parameter in all versions up to, and including, 3.8.8 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with shop manager-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | ||||
| CVE-2026-73059 | 1 Stoatchat | 1 Stoatchat | 2026-08-16 | 6.5 Medium |
| stoatchat before 0.15.0 contains a permission bypass vulnerability in the message_fetch route that checks only ViewChannel permission instead of requiring ReadMessageHistory. Attackers with ViewChannel access but ReadMessageHistory denied can retrieve individual message content by ID, bypassing the intended history restriction enforced by bulk read routes. | ||||
| CVE-2026-19917 | 1 Code-projects | 1 Online Food Order System | 2026-08-15 | 6.3 Medium |
| A flaw has been found in code-projects Online Food Order System 1.0. The impacted element is an unknown function of the file delete_food_items1.php. Executing a manipulation of the argument checkbox can lead to sql injection. The attack can be executed remotely. The exploit has been published and may be used. | ||||
| CVE-2026-19899 | 1 Sourcecodester | 1 Class And Exam Timetabling System | 2026-08-15 | 7.3 High |
| A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0. The affected element is an unknown function of the file /edit_teacher.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2026-15993 | 2 10web, Wordpress | 2 Form Maker By 10web – Mobile-friendly Drag & Drop Contact Form Builder, Wordpress | 2026-08-15 | 5.3 Medium |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to blind SQL Injection via '{username}' Placeholder in Dynamic-Choice Field WHERE Clause in all versions up to, and including, 1.15.44 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This requires that a form is configured with a DB-backed dynamic choice field whose WHERE template references the {username} placeholder, and the attacker must first set their own display_name to a SQL payload via the standard WordPress profile edit screen before triggering the fm_reload_input AJAX endpoint. | ||||
| CVE-2026-15453 | 2 Iqonicdesign, Wordpress | 2 Kivicare – Clinic & Patient Management System (ehr), Wordpress | 2026-08-15 | 6.5 Medium |
| The KiviCare – Clinic & Patient Management System (EHR) plugin for WordPress is vulnerable to generic SQL Injection via the 'searchTerm' parameter in all versions up to, and including, 4.5.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires a KiviCare custom role with the 'settings_view' permission (e.g., Doctor or Receptionist), meaning standard WordPress subscribers cannot exploit this without a KiviCare-assigned role. | ||||
| CVE-2026-53789 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-15 | 6.5 Medium |
| rsync before 3.5.0 contains an improper path handling vulnerability that allows a malicious sender to expand the scope of --delete operations beyond the intended destination subtree by sending a crafted file list that causes rsync to reclassify implied parent directory entries or treat synthetic paths as the transfer root. Attackers can exploit multiple variants including implied parent reclassification, synthetic root path construction, legacy protocol behavior below version 30, and non-directory root handling to cause the receiver to delete files outside the authorized destination directory. | ||||
| CVE-2026-8840 | 2 Wordpress, Wpdevart | 2 Wordpress, Booking Calendar, Appointment Booking System | 2026-08-15 | 5.3 Medium |
| The Booking calendar, Appointment Booking System plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.2.36. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to mark arbitrary reservations as paid or completed, cancel legitimate payments, auto-approve reservations, and trigger transactional booking emails by writing attacker-supplied payment status and transaction data directly into the payments table. The auto-approval of reservations is only triggered when the 'enable_psuccess_approval' site option is enabled, but payment status manipulation and email dispatch are exploitable regardless of that setting. | ||||
| CVE-2026-73607 | 2 B3log, Siyuan | 2 Siyuan, Siyuan | 2026-08-14 | 5.8 Medium |
| SiYuan versions before v3.7.4 contain an information disclosure vulnerability in the /api/storage/getOutlineStorage endpoint that performs no authorization checks. Attackers can retrieve outline state including heading identifiers for any document by supplying its identifier, even for documents forbidden to the requester. | ||||
| CVE-2026-73603 | 1 Flowiseai | 1 Flowise | 2026-08-14 | N/A |
| Flowise before 3.1.4 fails to validate chatflow visibility in the unauthenticated text-to-speech endpoint, allowing attackers to abuse private chatflow TTS credentials. Unauthenticated attackers can generate unlimited text-to-speech audio using stored OpenAI or ElevenLabs API keys by providing a valid chatflow UUID, incurring costs on the chatflow owner's account. | ||||
| CVE-2026-73499 | 1 Etcd | 1 Etcd | 2026-08-14 | 6.5 Medium |
| etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.5.33, 3.6.14, and 3.7.1, a user granted READ permission on a single exact key can use the Watch gRPC API with clientv3.WithFromKey() to receive watch events for every key lexicographically greater than or equal to the permitted key. In server/etcdserver/api/v3rpc/watch.go, the open-ended RangeEnd sentinel is rewritten before the RBAC permission check in server/auth/range_perm_cache.go function isRangeOpPermitted, causing the request to be treated as an exact-key watch. Range/Get and DeleteRange requests are not affected, and the issue affects only clusters with authentication enabled. This issue is fixed in versions 3.5.33, 3.6.14, and 3.7.1. | ||||
| CVE-2026-47718 | 1 Frangoteam | 1 Fuxa | 2026-08-14 | N/A |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. When `secureEnabled=true`, FUXA `1.3.0-2773` still allows guest and invalid-token requests to read project, alarms, and scheduler APIs. Version 1.3.1 fixes this issue. | ||||
| CVE-2026-73331 | 2 Owen2345, Tuzitio | 2 Camaleon Cms, Camaleon Cms | 2026-08-14 | 7.1 High |
| CamaleonCMS 2.9.1 contains an authenticated SQL injection vulnerability that allows authenticated attackers with post creation or editing privileges to submit a crafted slug value containing SQL syntax that the database backend evaluates as part of an inadequately parameterized query. Attackers can supply malicious slug payloads using boolean- or union-style blind SQL injection techniques to extract sensitive data from the underlying SQLite database, including administrative credentials and configuration values stored in application tables. | ||||
| CVE-2026-73301 | 1 Budibase | 1 Budibase | 2026-08-14 | 4.3 Medium |
| Budibase is an open-source low-code platform. Prior to 3.39.25, the GET /api/global/groups endpoint in packages/worker/src/api/routes/global/groups.ts omitted auth.builderOrAdmin, allowing an authenticated BASIC role user to enumerate tenant groups, role mappings and user memberships, builder permissions, and default-group flags. The disclosure exposes the tenant access-control structure to users who are not builders or administrators. This issue is fixed in version 3.39.25. | ||||