Export limit exceeded: 371972 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 86319 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (86319 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72446 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | ||||
| CVE-2026-72412 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes. | ||||
| CVE-2026-72378 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix error code in afs_extract_vl_addrs() The error codes on these paths are only set on the first iteration through the loop. Set the correct error code on every iteration. | ||||
| CVE-2026-72343 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(), before mlx5e_open(). At that point priv->stats_nch is still zero, because it is only ever incremented in mlx5e_channel_stats_alloc(), which is reached only from mlx5e_open_channel(). mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather than NULL. The "if (!buf)" guard does not catch this, and mlx5e_hv_vhca_stats_create() completes "successfully" with priv->stats_agent.buf set to ZERO_SIZE_PTR. Once channels are opened (priv->stats_nch > 0) and the hypervisor enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes buf_len using the new non-zero stats_nch and calls memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10. Allocate the buffer based on priv->max_nch, which is set in mlx5e_priv_init() and is the upper bound on stats_nch: - Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and use it for the kvzalloc() in mlx5e_hv_vhca_stats_create(). - Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on stats_nch) for the worker's active payload size, so the wire format (block->rings = stats_nch) and the amount of data filled by mlx5e_hv_vhca_fill_stats() are unchanged. The max(max_nch, stats_nch) guard handles the rare case where mlx5e_attach_netdev() recomputes max_nch downward across a detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev does not call mlx5e_priv_cleanup, so stats_nch is only reset when the netdev is destroyed). Without the guard, the worker could compute buf_len from stats_nch and overrun the smaller buffer allocated based on the reduced max_nch. Allocating a non-zero buffer also makes the kvzalloc() failure path in mlx5e_hv_vhca_stats_create() reachable for the first time: it returns early without (re)creating the agent. Clear priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after freeing them, so that if a later create() bails out on this path, a subsequent teardown does not double-free the stale agent/buffer left from a previous enable/disable cycle. This mirrors the existing mlx5e pattern of preallocating arrays of size max_nch (e.g. priv->channel_stats) and lazily populating entries up to stats_nch on demand. | ||||
| CVE-2026-68476 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reload ip header after head reallocation __ip_vs_get_out_rt() calls skb_ensure_writable() which may reallocate skb->head. | ||||
| CVE-2026-19970 | 1 Assimp | 1 Assimp | 2026-08-17 | 6.3 Medium |
| A vulnerability was detected in Open Asset Import Library Assimp 17c12da. This affects the function Assimp::MDLImporter::AddBonesToNodeGraph_3DGS_MDL7 of the file code/AssetLib/MDL/MDLLoader.cpp of the component Node Parser. The manipulation of the argument bones_num results in heap-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-19978 | 1 Jiantao88 | 1 Android-mcp-server | 2026-08-17 | 5.3 Medium |
| A flaw has been found in jiantao88 android-mcp-server up to cfb872b2446794193b58edd63f4dbf6af48a6292. The impacted element is the function child_process.exec of the file build/index.js of the component Command Execution. Executing a manipulation of the argument deviceId/packageName/permission/extras[].key/extras[].value can lead to os command injection. It is possible to launch the attack on the local host. The exploit has been published and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called 14e2bf27c88ba137e35cbb0c2a75f72b595bb98a. It is advisable to implement a patch to correct this issue. | ||||
| CVE-2026-19976 | 1 Comfast | 1 Cf-n1-s | 2026-08-17 | 6.6 Medium |
| A security vulnerability has been detected in COMFAST CF-N1-S 2.6.0.1. Impacted is the function sub_44A968 of the file /cgi-bin/mbox-config?method=SET§ion=ptest_macaddress. Such manipulation of the argument macaddress leads to command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-19973 | 1 Itsourcecode | 1 Hospital Management System | 2026-08-17 | 6.3 Medium |
| A vulnerability was found in itsourcecode Hospital Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /viewpaymentreport.php. Performing a manipulation of the argument delid results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-19964 | 1 Jij-inc | 1 Jij-mcp-server | 2026-08-16 | 5.5 Medium |
| A vulnerability was found in Jij-Inc Jij-MCP-Server 0.1.0. This affects the function PythonREPL.run of the file jij_mcp/python_repr.py of the component jm_check. The manipulation of the argument code results in code injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-19960 | 1 Edimax | 1 Ew-7478apc | 2026-08-16 | 7.4 High |
| A security vulnerability has been detected in Edimax EW-7478APC 1.04. This impacts the function formWlbasic of the file /goform/formWlbasic. Such manipulation of the argument rootAPmac leads to command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-65767 | 1 Microsoft | 1 Teams | 2026-08-16 | 8.8 High |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Teams for Android allows an authorized attacker to perform spoofing over a network. | ||||
| CVE-2026-15826 | 2 Cozmoslabs, Wordpress | 2 User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor, Wordpress | 2026-08-16 | 9.8 Critical |
| The User Profile Builder plugin for WordPress is vulnerable to Authentication Bypass via Type Confusion in versions up to, and including, 3.16.4. This is due to the wppb_log_in_user() function calling absint() on the return value of wp_insert_user() before performing an is_wp_error() check — when a registration is submitted with a 61–70 character username, WordPress core rejects it with a WP_Error object, but absint() coerces that object to the integer 1 before the error check can short-circuit execution, causing the plugin to bind and return a transient-backed autologin nonce tied to user ID 1. This makes it possible for unauthenticated attackers to log in as the site's Administrator account (user ID 1), resulting in full administrative takeover of the site. | ||||
| CVE-2026-19929 | 1 Openboxes | 1 Openboxes | 2026-08-16 | 6.3 Medium |
| A vulnerability was identified in OpenBoxes up to 0.9.6. This impacts the function buildZebraTemplate of the file grails-app/controllers/org/pih/warehouse/core/DocumentController.groovy of the component Template Processing. The manipulation leads to improper neutralization of special elements used in a template engine. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. Upgrading to version 0.9.8-hotfix1 and 0.9.8 will fix this issue. The identifier of the patch is deeac6a4a7aba86ce99c4bda37142e41d209293e. It is recommended to upgrade the affected component. | ||||
| CVE-2026-19923 | 1 Code-projects | 1 Online Shopping System | 2026-08-16 | 6.3 Medium |
| A weakness has been identified in code-projects Online Shopping System 1.0. This affects an unknown part of the file /checkout_process.php. Executing a manipulation of the argument total_count can lead to sql injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-19919 | 1 Code-projects | 1 Online Shopping System | 2026-08-15 | 7.3 High |
| A vulnerability was found in code-projects Online Shopping System 1.0. This impacts an unknown function of the file /login.php of the component Login. The manipulation of the argument email results in sql injection. The attack may be performed from remote. The exploit has been made public and could be used. | ||||
| CVE-2026-19917 | 1 Code-projects | 1 Online Food Order System | 2026-08-15 | 6.3 Medium |
| A flaw has been found in code-projects Online Food Order System 1.0. The impacted element is an unknown function of the file delete_food_items1.php. Executing a manipulation of the argument checkbox can lead to sql injection. The attack can be executed remotely. The exploit has been published and may be used. | ||||
| CVE-2026-19905 | 1 Jinher | 1 Oa | 2026-08-15 | 7.3 High |
| A weakness has been identified in Jinher OA 1.0. Impacted is an unknown function of the file /C6/JHSoft.Web.HrmAttendance/attendance_out_approve.aspx. This manipulation of the argument httpOID causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-19904 | 1 Sourcecodester | 1 Online Book Store System | 2026-08-15 | 2.4 Low |
| A vulnerability was found in SourceCodester Online Book Store System 1.0. This vulnerability affects unknown code of the file /admin/index.php?page=site_settings of the component System Settings Module. The manipulation results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-74304 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev) and dereferences the result, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check, consistent with the rest of qca_setup(). | ||||