Export limit exceeded: 370352 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 22352 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22352 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72203 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_write_mft_block() -> ntfs_may_write_mft_record() -> holds one extent mrec_lock from a previous iteration -> tries to acquire another base inode extent_lock By removing all extent_lock and extent mrec_lock acquisition from the MFT folio writeback path, the ABBA lock ordering is eliminated: Path A: __ntfs_write_inode(): extent_lock -> mrec_lock Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock Path B is always redundant for extent records because: 1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio. It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A. Therefore, normal extent modifications never create a situation where the MFT folio is dirty and Path B is not scheduled. 2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside ntfs_mft_record_alloc(). But all identified callers in attrib.c (ntfs_attr_add, ntfs_attr_record_move_away, ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through with mark_mft_record_dirty(), which triggers Path A to write the complete record. 3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent inodes, ensuring all dirty extents are flushed via Path A before the base inode leaves the icache. | ||||
| CVE-2026-72197 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound DeleteIndexEntryAllocation memmove length In do_action()'s DeleteIndexEntryAllocation case, e->size comes from an on-disk INDEX_BUFFER entry. When e->size makes e + e->size point past hdr + hdr->used, PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t that is silently cast to a quasi-infinite size_t when passed to memmove(). The memmove then walks past the destination buffer. The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543 already carries the corresponding guard: if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize || Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) || used + esize > le32_to_cpu(hdr->total)) { goto dirty_vol; } Apply the same shape to the allocation-path case. Also reject esize == 0: memmove(e, e, ...) is a no-op and leaves hdr->used unchanged, hiding a malformed entry from the existing check_index_header() walk. Reproduced under UML+KASAN on mainline 8d90b09e6741 by mounting a crafted NTFS image: the unguarded memmove takes a length of 0xffffffffffffff00 and the kernel oopses in memmove+0x81/0x1a0 on the do_action+0x36a2 frame. [almaz.alexandrovich@paragon-software.com: clang-formatted the changes] | ||||
| CVE-2026-72162 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec [BUG] On-disk corruption setting l_next_free_rec to 0 in an inode's embedded extent list triggers a UBSAN panic on the next write to that file. [CAUSE] ocfs2_sum_rightmost_rec() computes i = le16_to_cpu(el->l_next_free_rec) - 1 and accesses el->l_recs[i] without validating i. When l_next_free_rec is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls past the end of the array. Either case violates the __counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN. [FIX] Validate the inode's embedded extent list when the inode is read, in ocfs2_validate_inode_block(): l_count must be non-zero and no larger than the inode block can hold, and l_next_free_rec must not exceed l_count. A corrupt list is rejected at read time, before the b-tree code can index l_recs[] out of bounds. | ||||
| CVE-2026-72160 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72157 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc ("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). | ||||
| CVE-2026-72143 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is only restored to power domain 0 after resume. During suspend, control values are read and stored for all power domains. Use pd_info->sst_base instead of power_domain_info->sst_base, which only points to power domain 0 base address. | ||||
| CVE-2026-72141 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the interrupt-driven block-read state machine rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle of this i2c controller. Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to 2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte path. The dummy byte is discarded; block-read callers only consume buf[0..count-1]. Reading I2DR has likewise already armed the next byte on the count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting with -EPROTO; otherwise the failing transfer's STOP cannot complete and the bus stays held. The atomic path regressed earlier (v3.16) and is fixed separately; this patch covers only the v6.13 state-machine rework. | ||||
| CVE-2026-72137 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6 send helper reports an error. That cleanup is only correct before the skb is handed to the output path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the networking stack may already have consumed the skb before returning an error, so freeing it again is unsafe. Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4() and nat_keepalive_send_ipv6(), where the caller still owns the skb, and keep nat_keepalive_send() responsible only for family dispatch and the unsupported-family cleanup path. | ||||
| CVE-2026-72099 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again. | ||||
| CVE-2026-68476 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reload ip header after head reallocation __ip_vs_get_out_rt() calls skb_ensure_writable() which may reallocate skb->head. | ||||
| CVE-2026-72161 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: add journal NULL check in ocfs2_checkpoint_inode() During unmount, ocfs2_journal_shutdown() frees the journal and sets osb->journal to NULL. Later, when VFS evicts remaining cached inodes, ocfs2_evict_inode() -> ocfs2_clear_inode() -> ocfs2_checkpoint_inode() -> ocfs2_ci_fully_checkpointed() dereferences osb->journal, causing a NULL pointer dereference. Fix this by adding a NULL check for osb->journal in ocfs2_checkpoint_inode(). If the journal is NULL, it has already been fully flushed and destroyed during shutdown, so there is nothing to checkpoint. | ||||
| CVE-2026-72263 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: fix memory leak in snd_sof_load_topology When the topology filename contains "dummy" and tplg_cnt is 0, the function returns -EINVAL directly without freeing the tplg_files allocated by kcalloc() at line 2497. This leaks memory on every such topology load attempt. Fix this by setting ret = -EINVAL and jumping to the out: label, which already handles the kfree(tplg_files) cleanup. | ||||
| CVE-2026-72168 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix fault in unaligned fixup Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs, instead of kmalloc_obj() / kmalloc_objs() to prevent access to uninitialized data. Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at mtd_get_fact_prot_info. | ||||
| CVE-2026-72178 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: always put unsuccessfully committed target pids damon_commit_target() puts and gets the destination and the source target pids. It puts the destination target pid because it will be overwritten by the source target pid. It gets the source pid because the caller is supposed to eventually put the pids. In more detail, the caller will call damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source context. And in this case, [f]vaddr operation set's cleanup_target() callback will put the pids. The commit operation is made at the context level. The operation can fail in multiple places including in the middle and after the targets commit operations. For any such failures, immediately the error is returned to the damon_commit_ctx() caller. If some or all of the source target pids were committed to the destination during the unsuccessful context commit attempt, those pids should be put twice. The source context will do the put operations using the above explained routine. However, let's suppose the destination context was not originally using [f]vaddr operation set and the commit failed before the ops of the source context is committed. The destination does not have the cleanup_target() ops callback, so it cannot put the pids via the damon_destroy_ctx(). As a result, the pids are leaked. The issue in the real world would be not very common. The commit feature is for changing parameters of running DAMON context while inheriting internal status like the monitoring results. The monitoring results of a physical address range ain't have things that are beneficial to be inherited to a virtual address ranges monitoring. So the problem-causing DAMON control would be not very common in the real world. That said, it is a supported feature. And damon_commit_target() failure due to memory allocation is relatively realistic [1] if there are a huge number of target regions. Fix by putting the pids in the commit operation in case of the failures. The issue was discovered [2] by Sashiko. | ||||
| CVE-2026-72218 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file->f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file. | ||||
| CVE-2026-72224 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arenas on btt_init() error paths The arenas allocated by discover_arenas() or create_arenas() are not freed on some error paths in btt_init(). This leaks memory when BTT initialization fails. Call free_arenas() from the affected error paths to release the allocations. [ as: commit message and log edits ] | ||||
| CVE-2026-72269 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: fix potential memory leak in uvesafb_probe() Due to an incorrect goto label, memory allocated for modedb and modelist in uvesafb_vbe_init() is not freed in some error paths. Fix this by updating the goto label. | ||||
| CVE-2026-72240 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mfd: sm501: Fix reference leak on failed device registration When platform_device_register() fails in sm501_register_device(), the embedded struct device in pdev has already been initialized by device_initialize(), but the failure path only reports the error and returns without dropping the device reference for the current platform device: sm501_register_device() -> platform_device_register(pdev) -> device_initialize(&pdev->dev) -> setup_pdev_dma_masks(pdev) -> platform_device_add(pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before returning the error. The issue was identified by a static analysis tool I developed and confirmed by manual review. | ||||
| CVE-2026-72267 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: carminefb: fix potential memory leak in alloc_carmine_fb() The memory allocated for modelist in fb_videomode_to_modelist() is not freed in the subsequent error path. Fix that by calling fb_destroy_modelist() | ||||
| CVE-2026-72300 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code. | ||||