Export limit exceeded: 370672 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370672 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370672 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72032 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix matcher leak on resize target setup failure hws_bwc_matcher_move() allocates a replacement matcher before setting it as the resize target. If mlx5hws_matcher_resize_set_target() fails, the replacement matcher is not attached anywhere and is leaked. Fix the leak by destroying the replacement matcher before returning from the resize-target failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have a mlx5 HWS-capable device to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-72037 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Initialize eth_syslock spinlock before use lan743x_hardware_init() calls pci11x1x_strap_get_status() during the PCI11x1x probe sequence. That helper acquires the Ethernet subsystem hardware lock via lan743x_hs_syslock_acquire(), which relies on adapter->eth_syslock_spinlock to serialize access. The spinlock is currently initialized only after the strap status is read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized spinlock can trip the spinlock debug check. Fix by initializing adapter->eth_syslock_spinlock before reading the strap status so the probe path never attempts to lock an uninitialized spinlock. | ||||
| CVE-2026-72043 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect() When hardware page table walker (PTW) is enabled on LoongArch, the CPU may set _PAGE_DIRTY directly in the page table entry during a write TLB miss, without going through the software TLB store handler. The software TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED together: ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED) Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e. _PAGE_MODIFIED is left unchanged. This creates a window where a PTE has _PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED clear (software is unaware). When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and _PAGE_DIRTY bits: pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY); Since _PAGE_MODIFIED was never set, the dirtiness information is lost completely. Subsequently, when memory pressure triggers page reclaim, page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty() returns false) and the page may be freed without writeback, causing data corruption. Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits: if (pte_val(pte) & _PAGE_DIRTY) pte_val(pte) |= _PAGE_MODIFIED; The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case, where pmd entries need the same treatment. This ensures the software dirty tracking bit (checked by pte_dirty() and pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is preserved across fork COW write-protection. The issue was found by the LTP madvise09 test case, which exercises page reclaim after "madvise(MADV_FREE), write and fork" operation sequence on private anonymous mappings. | ||||
| CVE-2026-72046 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix header buffer corruption with header-split and HW-GRO The DQO RX datapath programs a per-buffer-queue-descriptor header_buf_addr at post time and reads the split header back at completion time. Both the post and the read currently index the header buffer by queue position rather than by the buffer's identity: - post (gve_rx_post_buffers_dqo): header_buf_addr is computed from bufq->tail - read (gve_rx_dqo): the header is read from desc_idx (the completion queue head index) This relies on the buffer-queue index and the completion-queue index being equal for the start of every packet, i.e. on the device consuming posted buffers and returning completions in the exact same order. That assumption does not hold once HW-GRO is enabled with multiple flows: coalesced segments are accepted and completed in an order that may differ from the order buffers were posted, and segments from different flows may interleave. That results in two problems: 1. Wrong header slot on read. Because the read offset is derived from the completion index (desc_idx) while the device wrote the header to the address programmed for the buffer's buf_id, the driver can copy a header belonging to a different packet. This shows up as throughput drop (about 30% drop and large numbers of TCP retransmissions) with header-split and HW-GRO both enabled and many streams. 2. Header buffer reused while still owned by the device. The driver advances bufq->head by one per completion and re-posts buffers based on that. Arrival of N RX completions only guarantees that at least N RX buffer descriptors have been read by the device. It does not guarantee that the device has relinquished the ownership of all the buffers corresponding to those N descriptors. With out-of-order completions (e.g. the completion for a packet copied into buffer N arrives before the completion for a packet copied into buffer N-1), the driver can re-post and overwrite a header buffer that the device is still going to write into, corrupting the header of a packet whose completion has not yet been processed. Fix both issues by indexing the header buffer by buf_id on both the post and read paths. Reading from buf_id's slot is therefore always correct regardless of completion ordering (fixes problem 1). Indexing by buf_id also ties each header slot to the lifetime of its buffer state. A buffer state is only returned to the free/recycle lists when its own completion (buf_id) is processed, so its header slot can only be re-posted after the device is done with it. This makes header slot reuse safe under out-of-order completions (fixes problem 2). Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the header buffers based on num_buf_states to match the buf_id indexing. | ||||
| CVE-2026-72048 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix cas_ctl leak on spi_async failure ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync(). | ||||
| CVE-2026-72049 | 1 Linux | 2 Kernel, Linux Kernel | 2026-08-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY dump on the legacy IEEE802154_NL generic-netlink family. Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the modern nl802154 family exposes their equivalents to unprivileged readers by design (NL802154_CMD_GET_WPAN_PHY and NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged users" annotations). | ||||
| CVE-2026-72050 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Free BPID bitmap on setup failure nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses a plain kcalloc(). If any of the following devm_kcalloc() allocations for the BPID mapping arrays fails, the function returns without freeing the bitmap. Free the BPID bitmap before returning from those error paths. | ||||
| CVE-2026-72051 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72052 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink ip6gre_changelink() and ip6erspan_changelink() operate on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate both ops on rtnl_dev_link_net_capable() at their top, before any attribute is parsed. | ||||
| CVE-2026-72056 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-72059 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: destroy DMA pool on CLDMA late init failure t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before initializing the TX and RX rings. If any ring initialization fails, the error path frees the already initialized rings but leaves the DMA pool allocated. Destroy md_ctrl->gpd_dmapool on the late-init failure path to avoid leaking the DMA pool. | ||||
| CVE-2026-72060 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: icssg: guard PA stat lookups icssg_ndo_get_stats64() unconditionally calls emac_get_stat_by_name() with FW PA stat names regardless of whether the PA stats block is present on the hardware. emac_get_stat_by_name() already guards the PA stats lookup with `if (emac->prueth->pa_stats)`; when that pointer is NULL the lookup falls through to netdev_err() and returns -EINVAL. Because ndo_get_stats64 is polled regularly by the networking stack this produces thousands of log entries of the form: icssg-prueth icssg1-eth end0: Invalid stats FW_RX_ERROR A secondary consequence is that the int(-EINVAL) return value is implicitly widened to a near-ULLONG_MAX unsigned value when accumulated into the __u64 fields of rtnl_link_stats64, silently corrupting the rx_errors, rx_dropped and tx_dropped counters reported by `ip -s link`. Every other PA-aware code path in the driver is already guarded with the same `if (emac->prueth->pa_stats)` check. Apply the same guard here. | ||||
| CVE-2026-72061 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sit: require CAP_NET_ADMIN in the device netns for changelink ipip6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. sit was the one tunnel type not covered by the recent series that added this check to the other changelink() handlers. | ||||
| CVE-2026-72072 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed the per-SC metadata_dst with metadata_dst_free(), which kfree()s the object unconditionally and ignores the dst reference count. The RX datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under rcu_read_lock() via xa_load(), takes a reference with dst_hold() and attaches the dst to the skb with skb_dst_set(). A reader that already obtained the rx_sc pointer can race with the delete path and operate on freed memory. Fix the owner side by dropping the reference with dst_release() instead of freeing unconditionally, and convert the RX datapath to dst_hold_safe() so a reader racing the SC delete cannot attach a dst whose last reference was just dropped; only attach it when a reference was actually taken. mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc() before rx_sc->md_dst was allocated and initialised, so a datapath reader that looked the SC up by fs_id could observe rx_sc with md_dst still NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer whose contents were not yet visible. NULL-check the xa_load() result and md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish happens only after md_dst is fully initialised; the xarray RCU publish then pairs with the rcu_read_lock()/xa_load() in the datapath. Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element without an RCU grace period while the same datapath reads it under rcu_read_lock(); that is a separate pre-existing issue left to a follow-up patch. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-72075 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command(). | ||||
| CVE-2026-72086 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Free the command tag on the TMR submit-failure path scsiback_device_action() obtains a command tag in scsiback_get_pend_req() and submits a task-management request with target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and scsiback jumps to the err: label, which sends a response but frees nothing, leaking the tag. Impact: a pvSCSI guest can leak the command tags of a LUN's session, stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests whenever target_submit_tmr() fails. transport_generic_free_cmd() cannot be used here. By the time target_submit_tmr() returns an error it has already run __target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the pointer dangling. Letting the command release run target_free_cmd_mem() would then double-free se_tmr_req. Use the same helper, which returns just the tag, on this path too. | ||||
| CVE-2026-72087 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for mboxq using mempool_alloc() is not freed in some of the early exit error paths. Fix that by moving the mempool_free() call to an earlier point after last use. | ||||
| CVE-2026-72106 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)". | ||||
| CVE-2026-72126 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path. | ||||
| CVE-2026-72062 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mt7621: avoid corruption of shared interrupt trigger state The bank-shared fields like 'rising' and 'falling' are modified using non-atomic read-modify-write operations. Since every gpio chip instance represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is called concurrently for different IRQs on the same bank a possible overwrite of each other's configuration is possible. Thus, protect this state with 'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip 'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks. | ||||