Export limit exceeded: 48394 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (48394 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72352 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: Fix hid_bpf_get_data() range check hid_bpf_get_data() returns a pointer into the HID-BPF context data when the caller-provided offset and size fit inside ctx->allocated_size. The current check adds rdwr_buf_size and offset before comparing the result against ctx->allocated_size. Since both values are unsigned, a very large size can wrap the sum below ctx->allocated_size and make the helper return a pointer even though the requested range is not contained in the backing buffer. Use check_add_overflow() to reject wrapped range ends before comparing the requested range end against ctx->allocated_size. | ||||
| CVE-2026-72450 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow). | ||||
| CVE-2026-72294 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Check irq validity in kvm_vcpu_ioctl_interrupt() Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here add irq validility cheking in kvm_vcpu_ioctl_interrupt(). | ||||
| CVE-2026-72298 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() qrtr_endpoint_post() validates an incoming packet with if (!size || len != ALIGN(size, 4) + hdrlen) goto err; where size comes from the wire. On 32-bit, size_t is 32 bits and ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check passes and skb_put_data(skb, data + hdrlen, size) writes past the hdrlen-sized skb and oopses the kernel. 64-bit is unaffected. This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post"), which fixed only the 64-bit case. Reject any size that cannot fit the buffer before the ALIGN. | ||||
| CVE-2026-72345 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, Fix off-by-one in single-FDB error rollback On failure at index i, the reverse cleanup loop in mlx5_lag_create_single_fdb() starts from i, so the failed index itself is rolled back. That can operate on uninitialized state or double-tear-down a rule the add_one path already self-rolled-back. Start the rollback from i - 1 so only successfully-installed entries are undone. | ||||
| CVE-2026-74419 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space should be limited by the buffer size provided by the application. If the buffer is smaller than the data size, return only the portion that fits instead of failing. | ||||
| CVE-2026-72351 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gue: validate REMCSUM private option length GUE private flags can indicate that remote checksum offload metadata is present. The private flags field itself is accounted for by guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even when GUE_PFLAG_REMCSUM is set. This lets a packet with only the private flags field pass validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum() read the missing REMCSUM start/offset fields from the following bytes. Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that malformed packets are rejected during option validation. | ||||
| CVE-2026-72442 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: fix and simplify IP6IP6 tunnel handling Fix nf_flow_ip6_tunnel_proto() to use pskb_may_pull() instead of skb_header_pointer() to ensure the outer IPv6 header is in the skb headroom, which is required for subsequent packet processing. Move ctx->offset update inside the IPPROTO_IPV6 conditional block since it should only be adjusted when an IP6IP6 tunnel is actually detected. Simplify the rx path by removing ipv6_skip_exthdr() and checking ip6h->nexthdr directly, as the flowtable fast path only handles simple IP6IP6 encapsulation without extension headers. Drop the tunnel encapsulation limit destination option support from the tx path to match, since the rx path no longer handles extension headers. Remove the encap_limit parameter from nf_flow_offload_ipv6_forward(), nf_flow_tunnel_ip6ip6_push() and nf_flow_tunnel_v6_push(), along with the ipv6_tel_txoption struct and related headroom/MTU adjustments. | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-74293 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_audmix: Validate written enum values fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src() convert the user-provided enum item with snd_soc_enum_item_to_val() before checking whether the item is within the enum's item count. The generic snd_soc_put_enum_double() helper performs that validation, but these callbacks use the converted value first: the clock-source path tests it with BIT(), and the output-source path indexes the prms transition table with it. Reject out-of-range enum items before converting them. | ||||
| CVE-2026-40145 | 2026-08-17 | N/A | ||
| A vulnerability exists in the interaction between a Endpoint Privilege Management (Windows Deployment) support utility and the agent's tamper protection controls. Under certain conditions, the protections applied to the utility process may not be enforced as intended. | ||||
| CVE-2026-74886 | 2026-08-17 | 9.8 Critical | ||
| openssl_encrypt versions before 1.4.0 contain a plugin sandbox bypass vulnerability where the PluginImportGuard blocks a different set of modules than the AST analyzer's DANGEROUS_MODULES set. Attackers can bypass AST analysis through string obfuscation or encoding to import unblocked dangerous modules like sys, shutil, multiprocessing, importlib, and pickle for arbitrary code execution. | ||||
| CVE-2026-63650 | 1 Openvpn | 1 Openvpn | 2026-08-17 | 3.1 Low |
| OpenVPN 2.7_alpha1 through 2.7.5 using mbedTLS allows remote authenticated users to be misidentified by ignoring the configured X.509 username identity lookup field | ||||
| CVE-2026-63649 | 1 Openvpn | 1 Openvpn | 2026-08-17 | 8.8 High |
| The Windows interactive service in OpenVPN 2.4.0 through 2.6.21 and 2.7_alpha1 through 2.7.5 allows local authenticated users to bypass the trusted configuration directory constraint and load arbitrary configuration files via crafted options that bypass whitelist checks | ||||
| CVE-2026-19968 | 1 Assimp | 1 Assimp | 2026-08-17 | 4.3 Medium |
| A weakness has been identified in Open Asset Import Library Assimp 17c12da. The affected element is the function Assimp::MDLImporter::ReadFaces_3DGS_MDL7 in the library code/AssetLib/LWO/LWOLoader.h of the component 3DGS MDL7 Model Parser. Executing a manipulation can lead to heap-based buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. This patch is called ee77bb09a42a49843ac85ef64c14d2328b251df1. Applying a patch is advised to resolve this issue. | ||||
| CVE-2026-19961 | 1 Edimax | 1 Ew-7478apc | 2026-08-17 | 9.9 Critical |
| A vulnerability was detected in Edimax EW-7478APC 1.04. Affected is the function formWlSiteSurvey of the file /goform/formWlSiteSurvey. Performing a manipulation of the argument selSSID results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-62769 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-08-17 | 6.7 Medium |
| Numeric truncation error in Windows DNS allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-72400 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: seg6: validate SRH length before reading fixed fields seg6_validate_srh() reads fixed SRH fields such as srh->type and srh->hdrlen before checking that the supplied length covers the fixed struct ipv6_sr_hdr fields. The BPF SEG6 encap path reaches this with a BPF program-supplied pointer and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6 encap header can therefore make the validator read srh->type at offset 2 beyond the caller-supplied buffer. Reject lengths shorter than the fixed SRH at the top of seg6_validate_srh(), before any field is read. This fixes the BPF helper path and keeps the common validator robust. | ||||
| CVE-2026-72483 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control() The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` greater than or equal to 32, the left shift operation invokes shift-out-of-bounds undefined behavior. This results in arbitrary bit corruption of `port_status`, including the normally-immutable change bits, which can bypass internal state checks and confuse the hub status. Fix this by rejecting requests whose `value` exceeds the shift width before performing the shift. This issue was found using a KLEE-based symbolic execution tool for kernel drivers that I'm currently developing. | ||||
| CVE-2026-74371 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | ||||