Export limit exceeded: 373908 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373908 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74724 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: avoid out-of-bounds write in ip_vs_nat_icmp Sashiko warns that local attacker can modify the packet while it is processed by IPVS. Some places read the IP ihl field multiple times which can cause out-of-bounds access. One such place is ip_vs_nat_icmp where we can write after the validated area. Fix it by providing ciph argument just like it is done for IPv6 and use ciph->len as offset to the embedded transport header. Modify some IPv4 header checks by reading the ihl field only once. | ||||
| CVE-2026-74723 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | ||||
| CVE-2026-74721 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages() Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma) before returning an error code to the caller. This is incorrect: amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo that registration. Calling vm_ops->close() manually — which drops the shmem pages_pin_count and the GEM object reference that backs the VMA — before the mmap syscall has even returned causes those resources to be released while the VMA is still alive. The kernel VMA teardown will call vm_ops->close() a second time when the process later unmaps the range, producing a reference count underflow. Replace both hard-error returns with a deferred-fault approach that keeps the VMA alive and retries page insertion through the HMM range-fault path. | ||||
| CVE-2026-74720 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer state for commuted arithmetic When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent. | ||||
| CVE-2026-74717 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, return NULL on create error Tracer creation can fail by returning either NULL or ERR_PTR. The return value is stored without a check on the device, and users treat ERR_PTR and NULL the same way. This also causes a crash in the core dump logic, which is missing the ERR_PTR check and ends up dereferencing it, as shown in the trace below. Switch tracer creation to return NULL on failure only, so callers only need a single NULL check. Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none) Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core] pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core] sp : ffff800081cf3c40 x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05 x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000 x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0 x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650 x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8 x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e Call trace: mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P) mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core] devlink_health_do_dump+0x9c/0x160 devlink_health_report+0x1c0/0x288 mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core] process_one_work+0x15c/0x3d8 worker_thread+0x18c/0x320 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: b9400000 5ac00800 7a401800 540003ca (3940a260) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x000000,00078031,75fce5a1,35fffe67 Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- | ||||
| CVE-2026-74715 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix netns reference imbalance in conntrack kfuncs The opts argument of the BPF conntrack kfuncs can point to a shared map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read opts->netns_id separately when acquiring and releasing the network namespace reference. The reference imbalance can occur as follows: CPU 0 CPU 1 read opts->netns_id (-1) skip get_net_ns_by_id() write opts->netns_id (id) read opts->netns_id (id) put_net(net) /* no matching get */ The reverse transition leaks the reference. Repeating the unmatched put can destroy a live namespace and crash later users. The kernel reported: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700 Call Trace: __sys_bpf+0x1662/0x50c0 __x64_sys_bpf+0x73/0xb0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Snapshot every input field of opts with READ_ONCE() before validating or using it. The netns_id snapshot keeps the namespace get/put pair balanced, while the other snapshots keep the remaining options from changing partway through an invocation. The individual reads can still observe an inconsistent combination during a concurrent update, but each selected field value remains stable for that invocation. | ||||
| CVE-2026-74714 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch() reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto the ehash chain, drops the bucket lock, and only afterwards sets rsk_refcnt to 3. Lockless readers such as __inet_lookup_established() handle this with refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain sock_hold() while holding the bucket lock, on the assumption that the lock guarantees sk_refcnt > 0. That assumption does not hold for request_sock: CPU 0 CPU 1 ----- ----- tcp_conn_request() reqsk_queue_hash_req() inet_ehash_insert(req) spin_lock(bucket) __sk_nulls_add_node_rcu(req) // rsk_refcnt == 0 spin_unlock(bucket) bpf_iter_tcp_established_batch() spin_lock(bucket) sock_hold(req) <-- addition on 0 spin_unlock(bucket) refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value which surfaces as: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1 Call Trace: bpf_iter_tcp_established_batch+0x14e/0x170 bpf_iter_tcp_batch+0x53/0x200 bpf_iter_tcp_seq_next+0x27/0x70 bpf_seq_read+0x107/0x410 vfs_read+0xb9/0x380 The iterator's stolen reference is lost when the publishing CPU's refcount_set() overwrites the count, leaving the socket one reference short. When the last legitimate owner drops its reference the reqsk is freed while still reachable, leading to use-after-free. This reproduces in seconds with tcp_syncookies=0, a handful of threads doing connect()/close() to a local listener while others read an iter/tcp link in a tight loop. Use refcount_inc_not_zero() and skip the socket on failure. A skipped socket is still part of the bucket, so keep counting it in expected. The reallocations are sized from expected, and a request sock whose refcount gets published while the lock is held across the last realloc must already have room. A skipped socket is counted in expected but never batched, so end_sk can be short of expected on a batch that is actually complete. Decide completeness by whether the walk left any socket behind instead. The WARN after the locked realloc checks the same, replacing an end_sk == expected check that could not hold on that path since commit cdec67a489d4 ("bpf: tcp: Make sure iter->batch always contains a full bucket snapshot"). If every matching socket in a bucket is mid-init (refcount 0), end_sk stays 0. Advance to the next bucket rather than returning a batch entry that was never filled this round. | ||||
| CVE-2026-74713 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost_iotlb: bound map allocation in add_range vhost_iotlb_add_range_ctx() only retires an old entry when the table has a non-zero limit, has exactly reached that limit and has VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating entries after reaching their configured limit. Existing vhost devices allocate their IOTLB with max_iotlb_entries from vhost.c, which defaults to 2048 and is tunable by module parameter. Use the caller-provided limit at the allocation point instead of adding a separate default in the common IOTLB helper, and reject non-positive values in vhost paths that can report an error. Other vhost IOTLB users should not create zero-limit tables when entries can be populated from userspace or guest-controlled requests. Add caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require at least two entries for vdpa_sim and mlx5 vDPA paths that install full-range mappings, since those mappings are split into two IOTLB entries. Handle full-range mappings in the common helper by checking that the IOTLB can hold both split entries before inserting the first half. This avoids returning an error after leaving a half mapping behind. When the table is full, keep the existing retire behavior for retiring tables and return -ENOSPC for non-retiring tables. Reuse the retired map node instead of freeing it and allocating a replacement, so a stream of IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table has reached its limit. If a zero-limit IOTLB still reaches the common helper, treat it as a configuration error and return -EINVAL. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-74712 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix buffer length in create_direct_keys() We have seen in our CI the following KASAN message: BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core] Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764 [...] [<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core] [<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core] [<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa] [<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa] [...] The buggy address is located 4128 bytes inside of allocated 4384-byte region [0000000176794000, 0000000176795120) So in essence we read 16 bytes beyond 4384-byte allocation. create_direct_keys calculates the pointer and length for in and out buffers. The size calculation for in includes the entire structure size (out + in + mtt[]) but the pointer passed to cmd_exec points only to the 'in' field, skipping the 'out' field. This causes mlx5_copy_to_msg() to read beyond the allocated buffer by sizeof(out) bytes when copying command data. Properly calculate the input size to match the pointer and allocation size. | ||||
| CVE-2026-74711 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values. | ||||
| CVE-2026-74710 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: require at least 16 bytes of TX metadata AF_XDP accepts a TX metadata length as small as eight bytes, but every supported request needs the flags plus at least one eight-byte request field. Such short metadata also lets the kernel read beyond the registered area. Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve compatibility with applications that do not use launch-time metadata. | ||||
| CVE-2026-74708 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: validate launch-time metadata size Launch-time metadata extends beyond the first 16 bytes of struct xsk_tx_metadata. Reject the request when the registered metadata area does not contain the complete field. Snapshot the validated flags for the generic transmit path and use that snapshot for request and completion processing, avoiding inconsistent decisions if user space changes the flags concurrently. Note that only xsk_skb_metadata is properly using the flags, __xsk_buff_get_metadata ignores them. Next commits address that. | ||||
| CVE-2026-74707 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: validate metadata when processing requests The zero-copy path validates TX metadata while obtaining the descriptor context, then reads it again later when preparing the hardware request. User space can change the metadata between those operations and bypass the original validation. Validate the metadata in xsk_tx_metadata_request() and use the resulting flags snapshot for every feature check. Read request fields once so all zero-copy drivers process only values observed after successful validation. | ||||
| CVE-2026-74705 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free. | ||||
| CVE-2026-74704 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter The sch_cake ACK filter parses packets to find the TCP header and filter duplicated ACKs if the flow is backlogged. The parsing code contains a WARN_ON(1) which can be triggered by a malformed IP header in certain cases. Depending on the system configuration, this leads either to either spamming dmesg with warnings, or a panic if panic_on_warn is set. The code already correctly skips the offending packet in the branch that triggers the warning, so the WARN_ON itself doesn't really serve any purpose. So just drop it altogether to avoid the inconvenient side effects. | ||||
| CVE-2026-74703 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Validate T10 PI scatterlist counts When T10 PI is negotiated, vhost-scsi splits protection bytes from the data iterator before mapping the request scatterlists. A malformed request can claim protection bytes that cover or exceed the full payload length. The former leaves no data bytes to map, while the latter underflows exp_data_len before advancing the iterator. Both cases can let a zero data SGL count reach sg_alloc_table_chained(), which triggers BUG_ON(!nents). Reject protection lengths that cover or exceed the payload before subtracting prot_bytes and advancing the iterator. Also propagate negative errors from the protection SGL calculation before calling the allocator, matching the data SGL path. | ||||
| CVE-2026-74702 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward. | ||||
| CVE-2026-74701 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/openvswitch: check Ethernet header length in key_extract() When a packet arrives on an ARPHRD_NONE device (e.g. TUN), ovs_flow_key_extract() trusts the user-provided skb->protocol field: if it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes for MAC addresses and parse_ethertype() pulls 2 more, either of which triggers a kernel BUG in __skb_pull() when the linear area is too small. kernel BUG at include/linux/skbuff.h:2848! RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933 ovs_flow_key_extract+0x419/0xa70 ovs_vport_receive+0x222/0x390 netdev_frame_hook+0x3e0/0x630 tun_get_user+0x2d0c/0x38e0 Fixed by calling check_header() in key_extract() before accessing the Ethernet header. | ||||
| CVE-2026-74700 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers Another challenge with unlocked filters. There is a short window in tc_new_tfilter where a tcf_proto can be found and briefly referenced by a totally unrelated, unlocked classifier's request and cause a race. Feng created a poc which created this race with two threads, one creating a u32 filter and other a flower filter in the same chain/prio: 1. Both threads enter tc_new_tfilter, both find the chain empty, both drop filter_chain_lock 2. u32 finishes tcf_proto_create("u32") first, calls tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain 3. flower finishes tcf_proto_create("flower") later, calls tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp already there, takes a reference on it, destroys flower's own tp_new and returns u32_tp to the caller. Flower then hits the kind mismatch check (because it requested for kind "flower" but tp->ops->kind is "u32") and goes through the errout path which calls tcf_proto_put() on u32_tp. If the u32 thread has already gone through its own errout (its change() call failed on the PoC's empty options) and dropped its create and insert refs, flower's put is the last one and drops u32_tp's refcnt to zero. At this point tp->ops->destroy() runs in a context that never took rtnl_lock. When that happens, it might cause a UAF like the following (illustrated by the PoC): [ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393) [ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524 Call Trace: u32_init (net/sched/cls_u32.c:393) tc_new_tfilter (net/sched/cls_api.c:2378) Allocated by task 526: u32_init (net/sched/cls_u32.c:378) tc_new_tfilter (net/sched/cls_api.c:2378) Freed by task 522: kfree u32_destroy (net/sched/cls_u32.c:662) tcf_proto_destroy (net/sched/cls_api.c:446) tcf_proto_put (net/sched/cls_api.c:459) tc_new_tfilter (net/sched/cls_api.c:2459) Fix this by having tcf_proto_destroy() take rtnl_lock around tp->ops->destroy() for locked classifiers whenever rtnl is not held. To explain why I used a temp variable "not_lockless" I'd like to point to a semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here for future cleanup if deemed necessary): The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are redundant sources of truth for whether rtnl_lock is held. Among the nine classifier destroy(..rtnl_held..) callbacks, only flower consults the rtnl_held parameter which it propagates to tc_setup_cb_destroy() and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic, fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy() (u32, bpf, mall) hardcode true always instead of forwarding the parameter. A future cleanup should remove the rtnl_held parameter from the destroy callback signature entirely and have callers rely solely on their knowledge whether they are running in an unlocked context. | ||||
| CVE-2026-74697 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption. | ||||