Export limit exceeded: 370322 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370322 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-66270 | 1 Dell | 1 Wyse Management Suite | 2026-08-17 | 7.2 High |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. | ||||
| CVE-2026-48595 | 1 Elixir-tesla | 1 Tesla | 2026-08-17 | 5.9 Medium |
| Improper Handling of Case Sensitivity vulnerability in elixir-tesla tesla allows credential leakage to a third-party origin on cross-origin redirects. Tesla.Middleware.FollowRedirects strips security-sensitive headers on cross-origin redirects using a case-sensitive string comparison against a lowercase filter list (@filter_headers ["authorization", "host"]). HTTP header names are case-insensitive per RFC 7230, but Tesla preserves header keys verbatim as supplied by the caller without normalizing case. A header set as {"Authorization", "Bearer …"} (the RFC 7235 canonical casing used by virtually all HTTP libraries and documentation) does not match the lowercase filter entry and is forwarded to the redirect destination. An attacker who can control or influence a Location: response seen by the client (via their own endpoint, a redirect-open upstream, or a compromised origin) receives the bearer token or other Authorization material on the cross-origin request. This issue affects tesla: from 1.4.0 before 1.18.3. | ||||
| CVE-2026-71693 | 2026-08-17 | N/A | ||
| DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. | ||||
| CVE-2026-72116 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. | ||||
| CVE-2026-72136 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72183 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling processes outside its Landlock domain. It can be bypassed through the asynchronous SIGIO delivery path. A sandboxed process that owns any file or socket can arm it with fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so that an I/O event makes the kernel deliver the chosen signal to the whole process group. As the head of its process group's task list (the default position right after fork()) that group can also hold the non-sandboxed process that launched it, e.g. a supervisor or a security monitor. The sandbox can thus kill or signal the processes LANDLOCK_SCOPE_SIGNAL is meant to protect from it. The scope is enforced in hook_file_send_sigiotask() against the Landlock domain recorded at F_SETOWN time, not the live domain of the sender. control_current_fowner() decides whether to record that domain and skips recording it when the fowner target is in the caller's thread group, which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID). For a process group (PIDTYPE_PGID) pid_task() returns only one member; recording is skipped whenever that member shares the caller's thread group, and hook_file_send_sigiotask() then lets the signal fan out to the whole group unchecked. Record the domain for every non single-process target so the scope is enforced against each group member at delivery time. That recording is necessary but not sufficient on its own: the kernel signals a process group through its members' thread-group leaders, and the leader of the registrant's own process can carry a different Landlock domain than the sibling thread that armed the owner. domain_is_scoped() would then deny that leader, even though commit 18eb75f3af40 ("landlock: Always allow signals between threads of the same process") requires same-process delivery to be allowed. hook_task_kill() avoids this by evaluating same_thread_group() live, per recipient; the SIGIO path instead delegates the whole decision to a single registration-time check, which a process-group fan-out cannot honor. So also record the registrant's thread group next to its domain and exempt it at delivery: hook_file_send_sigiotask() allows the signal whenever the recipient belongs to the registrant's own process, restoring the same-process guarantee while keeping out-of-domain group members blocked. The direct kill() path (hook_task_kill) already evaluates the live domain and is unaffected. [mic: Check pid_type earlier and improve comment, fix commit message, fix comment formatting] | ||||
| CVE-2026-72185 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix WARN_ON for resident attribute in ntfs_map_runlist_nolock() When ntfs_map_runlist_nolock() needs to look up the attribute extent containing a target VCN (ctx_needs_reset == true), it calls ntfs_attr_lookup() and then expects the result to be a non-resident attribute, since only non-resident attributes have a mapping pairs array to decompress. A crafted NTFS image can place a resident attribute where a non-resident one is expected, causing ntfs_attr_lookup() to succeed but return a resident attribute record. Previously this was caught only by a WARN_ON(), which does not stop execution. The code then falls through to read a->data.non_resident.highest_vcn from what is actually a resident attribute, accessing the wrong union member and corrupting the VCN range check. The caller path triggering this warning during mount is: ntfs_map_runlist_nolock ntfs_empty_logfile load_system_files ntfs_fill_super In this path ctx is NULL, so ntfs_map_runlist_nolock() allocates a temporary search context internally and sets ctx_needs_reset = true. The existing resident-attribute guard in the ctx != NULL branch already returns -EIO silently for the same condition; make the ctx_needs_reset path consistent by replacing the WARN_ON() with the same -EIO error return. This causes the crafted image to be rejected with a mount error instead of triggering a kernel warning. | ||||
| CVE-2026-72186 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: make system files immutable to prevent corruption When a system file such as $Bitmap is exposed via show_sys_files and written from userspace, the volume is corrupted and, because the cluster allocator scans $Bitmap through the same inode's page cache, a write to $Bitmap also deadlocks writeback against the folio it already holds locked. These files are maintained by the driver itself and have no valid reason to be written through the file interface. Mark base metadata files (mft_no < FILE_first_user) as immutable during inode read so the VFS rejects write, mmap, truncate and unlink with -EPERM. Directories are skipped so the root and $Extend remain usable. Internal metadata updates do not go through the VFS write path and are unaffected. | ||||
| CVE-2026-72188 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name() ntfs_lookup_inode_by_name() returns MFT references read from directory index entries on disk. These values are untrusted, but the function can currently return an error-marked MFT reference to its callers without validating it. Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image can set the MREF error bit while leaving the low bits as an arbitrary value, causing callers to consume a bogus pseudo-errno instead of treating the lookup result as corrupted on-disk metadata. Fix this at the source by normalizing every error-marked MFT reference returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to all four directory lookup return paths so every caller gets a validated result without needing additional checks or an API change. This keeps the sanitization in the common lookup helper, which is cleaner than duplicating validation in each caller. | ||||
| CVE-2026-13700 | 2026-08-17 | 5.9 Medium | ||
| The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled. | ||||
| CVE-2026-75046 | 1 Jetbrains | 1 Youtrack | 2026-08-17 | 4.3 Medium |
| In JetBrains YouTrack before 2026.2.18112 an authenticated user could enumerate accounts via the users search endpoint | ||||
| CVE-2026-68517 | 1 Nicolargo | 1 Glances | 2026-08-17 | 6.5 Medium |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, the cors_origins guard in glances/outputs/glances_restful_api.py uses exact list equality instead of wildcard membership, allowing a multi-origin list containing the wildcard to retain cors_credentials and expose authenticated REST API data to an untrusted website visited by a previously authenticated user. This issue is fixed in 4.5.6. | ||||
| CVE-2026-68519 | 1 Nicolargo | 1 Glances | 2026-08-17 | N/A |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, GlancesActions.run() in glances/actions.py ignores --disable-config-exec for on-alert action commands and invokes secure_popen() with shell operators enabled, allowing configured redirection, command chaining, or pipes to execute when an alert triggers. This issue is fixed in 4.5.6. | ||||
| CVE-2026-74253 | 1 Regularlabs.com | 1 Sourcerer Extension For Joomla | 2026-08-17 | N/A |
| Joomla Extension - regularlabs.com - Unauthenticated RCE through unverified reflected user input in Sourcerer < 14.0.0 - Regular Labs Sourcerer before 14.0.0 processes {source} blocks found in Joomla’s final rendered HTML without reliably determining where that code originated. | ||||
| CVE-2026-64865 | 1 Quantumnous | 1 New-api | 2026-08-17 | N/A |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.16, repeated PUT /api/user/self requests that update language or sidebar_modules can race relay billing because controller/user.go calls User.Update and updateUserCache performs a full RedisHSetObj write to user:.Quota, overwriting concurrent HINCRBY deductions and allowing an authenticated user to keep cached quota artificially high. This issue is fixed in version 1.0.0-rc.16. | ||||
| CVE-2026-73424 | 1 Withastro | 1 Astro | 2026-08-17 | 6.5 Medium |
| Astro is a web framework for content-driven websites. From 10.0.3 until 11.0.3, the Astro Vercel adapter in packages/integrations/vercel/src/serverless/entrypoint.ts accepts x_astro_path for the public /_isr function based only on the x-vercel-isr header, allowing unauthenticated GET requests to render routes protected only by Vercel edge path rules or split edge middleware. This issue is fixed in 11.0.3. | ||||
| CVE-2026-10571 | 4 Apple, Ibm, Linux and 1 more | 9 Macos, Aix, I and 6 more | 2026-08-17 | 5.7 Medium |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is affected by a denial of service caused by insecure deserialization. A low-privileged, administrative user could exploit this vulnerability to consume system resources when the restConnector-2.0 feature is enabled. | ||||
| CVE-2026-63701 | 1 Dell | 1 Wyse Management Suite | 2026-08-17 | 6.3 Medium |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Improper Deserialization of Untrusted Data vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation. | ||||
| CVE-2026-14875 | 1 Ibm | 1 I Access Client Solutions | 2026-08-17 | 7.3 High |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to arbitrary code execution on Windows when installed for all users due to publicly writeable directory. | ||||
| CVE-2026-48594 | 1 Elixir-tesla | 1 Tesla | 2026-08-17 | 7.5 High |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-tesla tesla allows a denial of service via decompression bomb in HTTP response bodies. When Tesla.Middleware.DecompressResponse or Tesla.Middleware.Compression is included in a Tesla middleware pipeline, HTTP response bodies are decompressed eagerly with no size limit. The decompress_body/2 function in lib/tesla/middleware/compression.ex passes the entire response body to :zlib.gunzip/1 or :zlib.unzip/1 without any cap on the output size. Additionally, compression_algorithms/1 splits the content-encoding header on commas and decompress_body/2 recurses once per token, applying a decompression pass on each iteration. A server advertising content-encoding: gzip, gzip, gzip, gzip causes four recursive decompression passes, yielding exponential amplification: each gzip layer can expand its input roughly 1000x, so a payload of a few hundred bytes on the wire inflates to gigabytes of BEAM heap, exhausting memory and crashing or freezing the calling process. This issue affects tesla: from 0.6.0 before 1.18.3. | ||||