Export limit exceeded: 370094 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370094 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74309 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler Look up the IRQ index in oct_hw->irqs instead of assuming irq - irqs[0]. This supports non-contiguous IRQ numbers and avoids incorrect ring indexing when irqs[0] is not the base. | ||||
| CVE-2026-74311 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: tear down old virtqueues before restore virtio_device_restore() resets the device and restores the negotiated features before calling ->restore(). viortc_freeze() intentionally leaves the existing virtqueues in place so the alarm queue can still wake the system, but viortc_restore() immediately calls viortc_init_vqs() without first deleting those old queues. If virtqueue reinitialization fails on virtio-pci, the transport error path can run vp_del_vqs() against a newly allocated vp_dev->vqs array while vdev->vqs still contains the old virtqueues. vp_del_vqs() then looks up queue state through the new array and can dereference a NULL info pointer in vp_del_vq(), crashing the guest kernel during restore. This can also happen during a non-faulty reinitialization, when one of the vp_find_vqs_msix() attempts is unsuccessful before a later attempt would succeed. Delete the stale virtqueues before rebuilding them. If restore fails before virtio_device_ready(), reuse the remove path to stop the device. Once the device is ready, return errors directly instead of deleting the virtqueues again. | ||||
| CVE-2026-19977 | 2 Efm, Iptime | 2 Iptime A3004t, A3004t | 2026-08-17 | 10 Critical |
| A vulnerability was detected in EFM ipTIME A3004T 14.19.0. The affected element is the function httpcon_check_session_url of the component Session Validation. Performing a manipulation results in improper authentication. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-11788 | 1 Redhat | 7 389 Directory Server, Directory Server, Enterprise Linux and 4 more | 2026-08-17 | 5.9 Medium |
| A flaw was found in 389 Directory Server. The dereference control plugin does not check for allocation failure before using a BER structure, allowing an unauthenticated remote attacker to crash the LDAP server when the system is under memory pressure. | ||||
| CVE-2026-11770 | 2 Port389, Redhat | 8 389-ds-base, 389 Directory Server, Directory Server and 5 more | 2026-08-17 | 7.5 High |
| A flaw was found in 389 Directory Server. An unauthenticated remote attacker can inject LDAP search filters into the CleanAllRUV replication status-check extended operation. Because the handler performs the search against cn=config with elevated replication plugin privileges and returns a boolean match result, the attacker can extract sensitive server configuration metadata, including replication bind DNs and password storage scheme information. | ||||
| CVE-2025-46373 | 1 Fortinet | 2 Forticlient, Forticlientwindows | 2026-08-17 | 7.1 High |
| A Heap-based Buffer Overflow vulnerability [CWE-122] vulnerability in Fortinet FortiClientWindows 7.4.0 through 7.4.3, FortiClientWindows 7.2.0 through 7.2.8 may allow an authenticated local IPSec user to execute arbitrary code or commands via "fortips_74.sys". The attacker would need to bypass the Windows heap integrity protections | ||||
| CVE-2026-72405 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync Yue Sun reported a use-after-free and debugobjects warning in udp_tunnel_nic_device_sync_work() during concurrent device operations. The workqueue core clears the internal pending bit before invoking the worker. At that point, a concurrent thread can queue the work again. When the already running worker eventually clears the work_pending flag to 0, it mistakenly clears the flag for the newly queued instance. udp_tunnel_nic_unregister() then observes work_pending as 0 and frees the structure while the second work item is still active in the queue, leading to UAF. Fix this by returning early in udp_tunnel_nic_device_sync() if work_pending is already set, preventing redundant work queueing. | ||||
| CVE-2026-72455 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix uninitialised pointer passed to audit_log_untrustedstring() Commit 4a134723f9f1 ("apparmor: move check for aa_null file to cover all cases") intrdouced a small bug, where path_name() may pass a potentially uninitialized *name to aa_audit_file() if the path->dentry had been replaced with aa_null.dentry earlier on. This can lead to page fault like one observed on 7.0.2 openSUSE Tumbleweed kernel: [51692.242756] [ T24690] BUG: unable to handle page fault for address: 0000000f00000003 [51692.242762] [ T24690] #PF: supervisor read access in kernel mode [51692.242763] [ T24690] #PF: error_code(0x0000) - not-present page [51692.242765] [ T24690] PGD 0 P4D 0 [51692.242768] [ T24690] Oops: Oops: 0000 [#1] SMP NOPTI [51692.242772] [ T24690] CPU: 3 UID: 1020 PID: 24690 Comm: snap-confine Tainted: G O 7.0.2-1-default #1 PREEMPT(full) openSUSE Tumbleweed ab90b4c9940707f9cafa19bdad80b2cec52dbe51 [51692.242775] [ T24690] Tainted: [O]=OOT_MODULE [51692.242777] [ T24690] Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP05, BIOS 03.18 01/08/2026 [51692.242778] [ T24690] RIP: 0010:strlen+0x4/0x30 [51692.242783] [ T24690] Code: f7 75 ec 31 c0 e9 17 9f 00 ff 48 89 f8 e9 0f 9f 00 ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 18 48 89 f8 0f 1f 40 00 48 83 c0 01 80 38 00 75 f7 48 [51692.242785] [ T24690] RSP: 0018:ffffd015eb1e3608 EFLAGS: 00010282 [51692.242787] [ T24690] RAX: 0000000000000000 RBX: ffff89796198a360 RCX: 0000000000000000 [51692.242788] [ T24690] RDX: 00000000000000d1 RSI: 0000000f00000003 RDI: 0000000f00000003 [51692.242790] [ T24690] RBP: ffffffffb7ede090 R08: 00000000000005f5 R09: 0000000000000000 [51692.242791] [ T24690] R10: 0000000000000000 R11: 0000000000000000 R12: ffffd015eb1e3700 [51692.242792] [ T24690] R13: ffff8977a22bc380 R14: ffffffffb7ec5190 R15: ffff8977a0c8aa80 [51692.242794] [ T24690] FS: 0000000000000000(0000) GS:ffff897f640d8000(0000) knlGS:0000000000000000 [51692.242796] [ T24690] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [51692.242797] [ T24690] CR2: 0000000f00000003 CR3: 00000006ad15f000 CR4: 0000000000f50ef0 [51692.242799] [ T24690] PKRU: 55555554 [51692.242800] [ T24690] Call Trace: [51692.242802] [ T24690] <TASK> [51692.242804] [ T24690] audit_log_untrustedstring+0x1d/0x40 [51692.242811] [ T24690] common_lsm_audit+0x71/0x1d0 [51692.242816] [ T24690] aa_audit+0x5a/0x170 [51692.242819] [ T24690] aa_audit_file+0x18a/0x1b0 [51692.242825] [ T24690] path_name+0xd2/0x100 [51692.242829] [ T24690] profile_path_perm.part.0+0x58/0xb0 [51692.242832] [ T24690] aa_path_perm+0xef/0x150 [51692.242837] [ T24690] apparmor_file_open+0x153/0x2e0 [51692.242840] [ T24690] security_file_open+0x46/0xd0 [51692.242844] [ T24690] do_dentry_open+0xe9/0x4d0 [51692.242848] [ T24690] vfs_open+0x30/0x100 While here, initialise variables which are passed down to path_name(). | ||||
| CVE-2026-72461 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference. | ||||
| CVE-2026-72464 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf->rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted. | ||||
| CVE-2026-72489 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: nvec: fix use-after-free in nvec_rx_completed() In nvec_rx_completed(), when an incomplete RX transfer is detected, nvec_msg_free() is called to return the message back to the pool by clearing its 'used' atomic flag. Immediately after this, the code accesses nvec->rx->data[0] to check the message type. Since nvec_msg_free() marks the pool slot as available via atomic_set(), any concurrent or subsequent call to nvec_msg_alloc() could claim that same slot and overwrite its data[] array. Reading nvec->rx->data[0] after freeing the message is therefore a use-after-free. Fix this by saving the message type byte before calling nvec_msg_free(), then using the saved value for the battery quirk check. | ||||
| CVE-2026-74333 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais until it finds an entry with initialised cleared, but soc_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. This was reported by KASAN: BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach] Read of size 1 Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-72304 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put In sof_ipc4_bytes_put(), the copy size is derived from the old data->size in the buffer rather than the incoming new data's size field from ucontrol. If the new data has a different size, the copy uses the wrong length: it may truncate valid data or copy stale bytes. Fix by validating and using the incoming data's sof_abi_hdr.size from ucontrol before copying. | ||||
| CVE-2026-72310 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix overflow in passthrough ioctl bounds check smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds. | ||||
| CVE-2026-72317 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction. | ||||
| CVE-2026-72318 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer. | ||||
| CVE-2026-72328 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential amdxdna_umap lifetime race amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove() before removing the object from abo->mem.umap_list. If aie2_populate_range() runs concurrently, it may obtain a reference to an amdxdna_umap that is being released, leading to a potential use-after-free. Use kref_get_unless_zero() in aie2_populate_range() when acquiring a reference. If the reference count has already dropped to zero, release is in progress and the entry is skipped. | ||||
| CVE-2026-72330 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | ||||
| CVE-2026-72335 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-72410 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Validate NIX maximum LFs correctly NIX maximum number of LFs can be set via devlink command but that can be done before assigning any LFs to a PF/VF. The condition used to check whether any LFs are assigned is incorrect. This patch fixes that condition. | ||||