Export limit exceeded: 373212 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373212 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74563 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check() rds_tcp_laddr_check() looks up a scoped IPv6 interface with dev_get_by_index_rcu(), drops the RCU read-side lock, and only then passes the bare struct net_device * into ipv6_chk_addr(). dev_get_by_index_rcu() only keeps the device alive within the same RCU read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can free the net_device; ipv6_chk_addr() then dereferences the stale pointer in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading freed memory. Keep the RCU read-side lock held across the ipv6_chk_addr() call instead of dropping it right after the lookup, so the device cannot be freed while it is in use. BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) Read of size 8 at addr ffff8880106ec000 by task exploit/153 Call Trace: ... kasan_report (mm/kasan/report.c:595) __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972) rds_tcp_laddr_check (net/rds/tcp.c:370) rds_bind (net/rds/bind.c:248) __sys_bind (net/socket.c:1920) __x64_sys_bind (net/socket.c:1956) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-74568 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Fix race between LPI release and re-registration Fix a potential race between decrementing an LPI's reference count and evicting that structure from the LPI xarray. LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa). When the reference count of an LPI structure drops to zero, vgic_release_lpi_locked() removes the structure from the xarray and frees it under the xarray lock. However, the release of an LPI can race with a concurrent LPI re-registration with the same INTID via vgic_add_lpi() on another CPU, since the reference count drop and the xarray eviction are not performed in a single atomic step. This can happen e.g. if the guest issues a DISCARD while the LPI is still referenced from a vCPU's active-pending list (ap_list), and the same INTID is re-mapped via MAPTI. Particularly, vgic_release_lpi_locked() is called from two distinct paths: direct release via vgic_put_irq(), and deferred release via vgic_release_deleted_lpis(). During direct release, the issue can result in deleting a newly registered LPI from the xarray: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq() __vgic_put_irq() refcount_dec_and_test() vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(old_irq) == false new IRQ inserted --> __xa_store(.., intid, ..) xa_unlock_irqrestore() xa_lock_irqsave(); vgic_release_lpi_locked() __xa_erase(.., irq->intid) <-- BUG: new IRQ is erased kfree_rcu(old_irq) During the deferred release path, the old IRQ can be leaked: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq_norelease() __vgic_put_irq() refcount_dec_and_test() irq->pending_release = true vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(oldirq) == false BUG: old IRQ overwritten --> __xa_store(.., intid, ..) xa_unlock_irqrestore() vgic_release_deleted_lpis() xa_lock_irqsave() xa_for_each() { .. } <-- old IRQ with pending_release = true is gone, so it cannot be released To fix the direct release path, move the reference count drop inside the xarray lock, making sure that vgic_add_lpi() never encounters the to-be-released LPI. In the deferred release path, the refcount drop must happen under a raw spinlock, so the xarray lock cannot be grabbed, and the same solution does not work. Instead, update vgic_add_lpi(), so that if it evicts an LPI from the xarray, it takes on the responsibility of freeing it. Consequently, an LPI may now be freed concurrently after a deferred release drops the refcount, so accessing the pending_release field is no longer safe from use-after-free. Delete all uses of the flag, and update vgic_release_deleted_lpis() to identify orphaned LPIs purely based on their refcount. | ||||
| CVE-2026-52607 | 2026-08-21 | 6.5 Medium | ||
| A directory traversal vulnerability in reportico-web <= 8.1.0 allows remote attackers to expose or execute arbitrary php files on the web server by specifying the filename in the target_format parameter in conjunction with the execute_mode=EXECUTE parameter of the run.php endpoint. | ||||
| CVE-2026-53572 | 2026-08-21 | 5.9 Medium | ||
| KEDA is a Kubernetes-based Event Driven Autoscaling component. Prior to 2.20.0, pkg/scalers/postgresql_scaler.go constructs libpq-style connection strings from tenant-controlled host, port, userName, dbName, sslmode, and password values, while escapePostgreConnectionParameter() only quotes values containing a literal space. Tabs, newlines, carriage returns, form feeds, vertical tabs, quotes, and backslashes can therefore create additional key-value tokens when pgx parses the string. An attacker able to create or modify a TriggerAuthentication or ScaledObject can inject host or sslmode parameters, redirect the database connection to an attacker-controlled server, expose credentials, or disable intended TLS protection. This issue is fixed in version 2.20.0. | ||||
| CVE-2026-18273 | 1 Kenwood | 1 Dnr1007xr | 2026-08-21 | N/A |
| Kenwood DNR1007XR USB Incorrect Default Permissions Local Privilege Escalation Vulnerability. This vulnerability allows physically present attackers to escalate privileges on affected installations of Kenwood DNR1007XR devices. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the configuration of the mount point for the USB filesystem. The issue results from incorrect permissions on a directory used by the product. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-29070. | ||||
| CVE-2026-18274 | 1 Heimdalldata | 1 Database Proxy | 2026-08-21 | N/A |
| Heimdall Data Database Proxy uploadJar Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Heimdall Data Database Proxy. Authentication is required to exploit this vulnerability. The specific flaw exists within the uploadJar method. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-28603. | ||||
| CVE-2026-18278 | 1 Sony | 1 Xav-9500es | 2026-08-21 | N/A |
| Sony XAV-9500ES prh_l2_decode_packet Out-Of-Bounds Read Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the handling of Bluetooth L2CAP packets. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of the device. Was ZDI-CAN-28990. | ||||
| CVE-2026-18279 | 1 Sony | 1 Xav-9500es | 2026-08-21 | N/A |
| Sony XAV-9500ES RTSP SETUP Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sony XAV-9500ES devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SETUP RTSP packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-29042. | ||||
| CVE-2026-18280 | 1 Sony | 1 Xav-9500es | 2026-08-21 | N/A |
| Sony XAV-9500ES gpsd Buffer Overflow Arbitrary Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Sony XAV-9500ES devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of NMEA data by the gpsd daemon. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the gpsd daemon. Was ZDI-CAN-29060. | ||||
| CVE-2026-18281 | 1 Sony | 1 Xav-9500es | 2026-08-21 | N/A |
| Sony XAV-9500ES l2_reassemble_sdu Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the handling of Bluetooth L2CAP packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-29072. | ||||
| CVE-2026-18282 | 1 Sony | 1 Xav-9500es | 2026-08-21 | N/A |
| Sony XAV-9500ES AVRCP_Br_Response_Parser Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability. The specific flaw exists within the handling of AVRCP packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28995. | ||||
| CVE-2026-18283 | 1 Sony | 1 Xav-9500es | 2026-08-21 | N/A |
| Sony XAV-9500ES udev USB Rules Authorization Bypass Vulnerability. This vulnerability allows physically present attackers to bypass authorization on affected installations on Sony XAV-9500ES devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the udev rules. A crafted USB device connected to the system can trigger instantiation of otherwise restricted USB device types. An attacker can leverage this vulnerability to bypass authorization on the system. Was ZDI-CAN-28992. | ||||
| CVE-2026-18284 | 1 Sony | 1 Xav-9500es | 2026-08-21 | N/A |
| Sony XAV-9500ES Crash Dump Handler Command Injection Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of process crash dumps. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-29061. | ||||
| CVE-2026-18285 | 1 Aeon | 1 Aeon | 2026-08-21 | N/A |
| Aeon load_rehab_pile_dataset Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Aeon. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the load_rehab_pile_dataset method. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28749. | ||||
| CVE-2026-18286 | 1 Aeon | 1 Aeon | 2026-08-21 | N/A |
| Aeon load_human_activity_segmentation_datasets Code Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of aeon. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the load_human_activity_segmentation_datasets method. The issue results from the lack of proper validation of a user-supplied string before using it to execute Python code. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29160. | ||||
| CVE-2026-18287 | 1 Aeon | 1 Aeon | 2026-08-21 | N/A |
| Aeon load_time_series_segmentation_benchmark Code Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of aeon. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the load_time_series_segmentation_benchmark method. The issue results from the lack of proper validation of a user-supplied string before using it to execute Python code. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29159. | ||||
| CVE-2026-18288 | 1 Originlab | 1 Originpro | 2026-08-21 | N/A |
| OriginLab OriginPro OPJU File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab OriginPro. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of OPJU files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-29331. | ||||
| CVE-2026-18290 | 1 Originlab | 1 Originpro | 2026-08-21 | N/A |
| OriginLab OriginPro OGG File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab OriginPro. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of OGG files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29333. | ||||
| CVE-2026-18291 | 1 Originlab | 1 Originpro | 2026-08-21 | N/A |
| OriginLab OriginPro OGW File Parsing Memory Corruption Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab OriginPro. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of OGW files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29334. | ||||
| CVE-2026-18292 | 1 Originlab | 1 Originpro | 2026-08-21 | N/A |
| OriginLab OriginPro OGG File Parsing Memory Corruption Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab OriginPro . User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of OGG files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29335. | ||||