Export limit exceeded: 370352 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370352 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-41983 | 1 Huawei | 1 Harmonyos | 2026-08-17 | 4.3 Medium |
| Null pointer dereference vulnerability in the browser module. Impact: Successful exploitation of this vulnerability may affect availability. | ||||
| CVE-2026-72072 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed the per-SC metadata_dst with metadata_dst_free(), which kfree()s the object unconditionally and ignores the dst reference count. The RX datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under rcu_read_lock() via xa_load(), takes a reference with dst_hold() and attaches the dst to the skb with skb_dst_set(). A reader that already obtained the rx_sc pointer can race with the delete path and operate on freed memory. Fix the owner side by dropping the reference with dst_release() instead of freeing unconditionally, and convert the RX datapath to dst_hold_safe() so a reader racing the SC delete cannot attach a dst whose last reference was just dropped; only attach it when a reference was actually taken. mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc() before rx_sc->md_dst was allocated and initialised, so a datapath reader that looked the SC up by fs_id could observe rx_sc with md_dst still NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer whose contents were not yet visible. NULL-check the xa_load() result and md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish happens only after md_dst is fully initialised; the xarray RCU publish then pairs with the rcu_read_lock()/xa_load() in the datapath. Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element without an RCU grace period while the same datapath reads it under rcu_read_lock(); that is a separate pre-existing issue left to a follow-up patch. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-72090 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Use caller client for debug BO sync amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls amdxdna_hwctx_sync_debug_bo(), but passes abo->client. amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle namespace for debug_bo_hdl and as the owner of the hardware context xarray. Those must match the file that supplied args->handle. The BO's stored client pointer is object state, not the ioctl context. Pass filp->driver_priv instead, matching the original handle lookup. | ||||
| CVE-2026-72149 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix burst size calculation Currently, the Tegra GPC DMA hardware requires the transfer length to be a multiple of the max burst size configured for the channel. When a client requests a transfer where the length is not evenly divisible by the configured max burst size, the DMA hangs with partial burst at the end. Fix this by reducing the burst size to the largest power-of-2 value that evenly divides the transfer length. For example, a 40-byte transfer with a 16-byte max burst will now use an 8-byte burst (40 / 8 = 5 complete bursts) instead of causing a hang. This issue was observed with the PL011 UART driver where TX DMA transfers of arbitrary lengths were stuck. | ||||
| CVE-2026-72200 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: detect mapping-pairs LCN accumulator overflow The NTFS mapping-pairs parser accumulates relative LCN deltas in a signed integer. A corrupted attribute can drive that addition past the representable range. One corrupt runlist shape sets the accumulated LCN to S64_MAX and then adds a delta of 1 in the next mapping-pairs entry. Signed overflow is undefined and can turn an invalid runlist into a different set of physical clusters. Check the LCN addition for overflow before storing the next run. | ||||
| CVE-2026-72232 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: ensure minimal ethernet header on TX As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len. | ||||
| CVE-2026-72315 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | ||||
| CVE-2026-68477 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix more places with wrong ipv6 transport offsets Sashiko reports for more incorrect IPv6 transport offsets. The app code for TCP was assuming IPv4 network header even after the ipvsh argument was provided. This can cause problems with apps over IPv6. As for the only official app in the kernel tree (FTP) this problem is harmless because we use Netfilter to mangle the FTP ports and we do not adjust the TCP seq numbers. Also, provide correct offset of the ICMPV6 header in ip_vs_out_icmp_v6() for correct checksum checks when the IPv6 packet has extension headers. | ||||
| CVE-2026-72009 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. | ||||
| CVE-2026-72019 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb->head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose. | ||||
| CVE-2026-72025 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records. | ||||
| CVE-2026-72061 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sit: require CAP_NET_ADMIN in the device netns for changelink ipip6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. sit was the one tunnel type not covered by the recent series that added this check to the other changelink() handlers. | ||||
| CVE-2026-72065 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Validate the packet length reported by the NIC Validate the packet length reported in the RX CQE before passing it to skb processing. The CQE is supplied by the NIC device and should not be blindly trusted. | ||||
| CVE-2026-72069 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: locking/rt: Fix the incorrect RCU protection in rt_spin_unlock() rt_spin_unlock() releases the RCU protection before unlocking the lock. That opens the door for the following UAF scenario: T1 T2 spin_lock(&p->lock); rcu_read_lock(); invalidate(p); p = rcu_dereference(ptr); rcu_assign_pointer(ptr, NULL); if (!p) return; spin_unlock(&p->lock); spin_lock(&p->lock) lock(&lock->lock); rcu_read_lock(); kfree_rcu(p); rcu_read_unlock(); .... spin_unlock(&p->lock) rcu_read_unlock(); // Ends grace period rcu_do_batch() kfree(p); UAF -> rt_mutex_cmpxchg_release(&lock->lock...) Regular spinlocks keep preemption disabled accross the unlock operation, which provides full RCU protection, but the RT substitution fails to resemble that. Same applies for the rwlock substitution. Move the rcu_read_unlock() invocation past the unlock operations to match the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but that's harmless as the caller needs to hold RCU read lock across the lock operation. The migrate_enable() call stays before the unlock operation because there is no per CPU operation in the unlock path which would require migration to be kept disabled. | ||||
| CVE-2026-72084 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Bound PR-OUT TransportID parsing to the received buffer core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. | ||||
| CVE-2026-72100 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, the code would exit with DM_MAPIO_KILL. However, the range would be already locked at this point, and it wouldn't be unlocked, resulting in a deadlock. Let's move the limit check up, so that when it exits, no resources are leaked. | ||||
| CVE-2026-72113 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. | ||||
| CVE-2026-72119 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the torn 64-bit ktime_t read on 32-bit platforms. | ||||
| CVE-2026-72133 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. | ||||
| CVE-2026-72144 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill. | ||||