Export limit exceeded: 21859 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21859 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74470 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write resp_report_zones() sizes the reply buffer from the CDB allocation length. The v3 fix rounds alloc_len up with ALIGN() before deriving the descriptor count: rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) - RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD); arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1); For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to 0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which passes the !arr check, and desc = arr + 64 is then dereferenced in the loop -> out-of-bounds write / panic. Clamp rep_max_zones to devip->nr_zones. The loop already stops at sdebug_capacity (after nr_zones zones), so a report can never hold more than nr_zones descriptors; the clamp does not change the report, it only bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device property that can never reach 0x100000000. | ||||
| CVE-2026-74404 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one Sashiko notes: > regarding the bounds check in snp_filter_reserved_mem_regions() > called via walk_iomem_res_desc(): does the check > if ((range_list->num_elements * 16 + 8) > PAGE_SIZE) > allow an off-by-one heap buffer overflow? > > If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096. > Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count > (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated > PAGE_SIZE buffer. Fix this by accounting for the entry about to be written to, in addition to the entries that are already allocated. | ||||
| CVE-2026-74410 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size. | ||||
| CVE-2026-74444 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | ||||
| CVE-2026-74452 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: reject firmware sections with oversized data In panthor_fw_load_section_entry(), the data size to copy is calculated without validating it against the allocated section_size: section->data.size = hdr.data.end - hdr.data.start; If a crafted firmware sets data.size larger than the allocated memory, this could cause a heap buffer overflow in panthor_fw_init_section_mem() memcpy(section->mem->kmap, section->data.buf, section->data.size); Additionally, if the section->data.size exceeds the BO size, could this memset underflow the size calculation, leading to a massive out-of-bounds zeroing of kernel memory? memset(section->mem->kmap + section->data.size, 0, panthor_kernel_bo_size(section->mem) - section->data.size); Reject section entries whose initial data is larger than the section size. | ||||
| CVE-2026-74371 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | ||||
| CVE-2026-74341 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix heap overflow from oversized firmware HAL response The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length. | ||||
| CVE-2026-74271 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | ||||
| CVE-2026-74291 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Check PCM and DAI name strings before use Topology objects store several PCM and DAI names in fixed-size UAPI arrays. Other topology parser paths validate these fields with bounded strnlen() checks before using them as C strings, but the PCM and DAI paths still pass some fixed-size arrays directly to strlen(), devm_kstrdup(), DAI lookup, and diagnostic prints. A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream capability name can therefore make the parser read past the end of the fixed-size field. Reject unterminated PCM and DAI name fields before consuming them as C strings. | ||||
| CVE-2026-74295 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. | ||||
| CVE-2026-72480 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case. | ||||
| CVE-2026-74306 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio/qat: fix f_pos race in qat_vf_resume_write() qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but copies into the migration-state buffer after taking the lock and re-reading the shared file position. Two concurrent writers could therefore pass the bounds check with the old offset, then have the second writer copy after the first advanced f_pos, writing past the end of the migration-state buffer. Take migf->lock before doing the boundary checks. | ||||
| CVE-2026-74309 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler Look up the IRQ index in oct_hw->irqs instead of assuming irq - irqs[0]. This supports non-contiguous IRQ numbers and avoids incorrect ring indexing when irqs[0] is not the base. | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-73194 | 2026-08-15 | N/A | ||
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write via an unvalidated numeric placeholder that sets the binder counter in preparse. preparse reserves seven output bytes per input byte, the width of the longest ':p99999' expansion. The ':N' branch parses the number with `atoi(src)` and assigns it to the binder counter with no range check, so a statement containing ':2147483648' leaves the counter negative (-2147483648 with glibc, where atoi wraps). Each following '?' then expands through `sprintf(start, ":p%d", idx++)` to ':p-2147483648', 14 bytes with the terminating NUL where the buffer budgets 7. The placeholder limit added in 1.650 tests the counter against 99,999, which a negative counter passes. Any caller that preparses an untrusted statement into ':pN' style placeholders gets a heap out-of-bounds write that grows with the number of '?' marks following the poisoned placeholder. The '?' and '%s' return styles compare the parsed number against the expected sequence and error out, and are unaffected. | ||||
| CVE-2026-73193 | 2026-08-15 | N/A | ||
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write on 32-bit perl via an integer wraparound in the output buffer size computed by preparse. preparse reserves its output buffer with `newSV(strlen(statement) * 7 + 16)`, budgeting seven output bytes per input byte for the longest ':p99999' expansion. The product is computed in STRLEN, which is 32 bits wide on a 32-bit perl build, so a statement of 613,566,757 bytes multiplies to 4,294,967,299, wraps modulo 2^32 to 3, and reserves 19 bytes. The parser then copies the statement out through a raw pointer with no capacity check, writing the whole 585 MB input past the end of the allocation. The 99,999 placeholder limit does not bound this path, which is reached by ordinary non-placeholder content. Any caller that passes an untrusted statement of that length to preparse on a 32-bit perl gets a heap out-of-bounds write of attacker controlled bytes. Builds with a 64-bit STRLEN are not affected, since the wrap there needs a statement of about 2.3 exabytes. | ||||
| CVE-2026-72423 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard conntrack opts error writes The conntrack lookup and allocation kfuncs take an opts pointer together with an opts__sz argument. The verifier checks only the memory range described by opts__sz, but the wrappers unconditionally write opts->error whenever the internal lookup or allocation helper returns an error. For an invalid size smaller than the end of opts->error, that write can land outside the verifier-checked range. Keep returning NULL for invalid arguments, but only report the error through opts->error when the supplied size includes the field. This preserves error reporting for the supported 12-byte and 16-byte layouts, and for other invalid sizes that still include opts->error. | ||||
| CVE-2026-72295 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate irqchip index in irqfd routing Sashiko reported that the irqchip index is not validated for LoongArch. Add validation and reject out-of-range irqchip indexes to avoid indexing past the routing table's chip array. | ||||
| CVE-2026-72299 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: restrict socket queue dumps in enqueue tracepoints tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is owned by user context. The spinlock protects the backlog queue in this path, but it does not serialize against the socket owner consuming or purging sk_receive_queue. KASAN reported: CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123 print_report+0xce/0x5b0 mm/kasan/report.c:482 kasan_report+0xc6/0x100 mm/kasan/report.c:597 __asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380 tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73 tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187 tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996 trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188 tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497 tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689 __tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512 tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400 sock_sendmsg+0x2f6/0x3e0 net/socket.c:825 splice_to_socket+0x7f9/0x1010 fs/splice.c:884 do_splice+0xe21/0x2330 fs/splice.c:936 __do_splice+0x153/0x260 fs/splice.c:1431 __x64_sys_splice+0x150/0x230 fs/splice.c:1616 x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41 do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130 RIP: 0033:0x71624e8aafe2 Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113 RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2 RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066 RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00 R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40 </TASK> The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump sk_receive_queue and can therefore dereference skbs that the socket owner has already dequeued or freed. Restrict these dumps to TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held spinlock. Keep the change limited to the enqueue path, where the unsafe queue dump is reachable while the socket is owned by user context. | ||||
| CVE-2026-72278 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Re-translate VNCR before injecting abort KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts for a write, similar to how a regular stage-2 mapping is handled. It is entirely possible that the guest reads from the VNCR before writing to it, in which case the PFN could only be read-only. Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR abort, allowing the host mapping to be faulted in for write the second time around. Interestingly enough, this also satisfies the ordering requirements of FEAT_ETS2/3 between descriptor updates and MMU faults. | ||||