Export limit exceeded: 370049 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370049 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370049 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72469 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix ep kref imbalance on ADDR_CHANGE rpcrdma_cm_event_handler() falls through to the disconnected: label on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED. The kref then underflows during connect teardown and rpcrdma_xprt_disconnect() operates on a freed ep. Reference counts across a normal connection lifecycle: rpcrdma_ep_create() kref_init ->1 rpcrdma_xprt_connect() ep_get ->2 (before post_recvs) RDMA_CM_EVENT_ESTABLISHED ep_get ->3 RDMA_CM_EVENT_DISCONNECTED ep_put ->2 rpcrdma_xprt_drain() ep_put ->1 rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy) The connect-time get in rpcrdma_xprt_connect(), taken just before rpcrdma_post_recvs() "while there are outstanding Receives," is balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has no get to consume, so its put drops the count to 1 and the drain put then frees the ep while rpcrdma_xprt_disconnect() still holds a pointer to it. Fix by dispatching on the prior re_connect_status via xchg(): for prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with no put; for prev == 1 call rpcrdma_force_disconnect() and return. The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED event -- reliably delivered when rdma_disconnect() is called on a still-connected cm_id -- to balance the ESTABLISHED get; rpcrdma_xprt_drain() continues to balance only that connect-time get. Any other prior value means teardown is already in flight. | ||||
| CVE-2026-72466 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()). | ||||
| CVE-2026-72465 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Sanitize the reply credit grant after parsing The out_norqst exit in rpcrdma_reply_handler() branches away before the credit clamp, so a reply that matches no pending request reaches out_post carrying the raw credit value parsed from the wire. rpcrdma_post_recvs() does not bound its @needed argument: the refill loop allocates and chains Receive WRs until the count is satisfied or allocation fails. A peer that sends a well-formed reply carrying an unknown XID and an inflated credit grant therefore drives rep allocation and Receive posting past re_max_requests on every such reply. Move the clamp to immediately after the credit field is parsed, ahead of the first branch that can reach out_post, so every later consumer sees a sanitized value. The cwnd update stays on the matched-request path. | ||||
| CVE-2026-72464 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf->rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted. | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-72462 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race. | ||||
| CVE-2026-72461 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference. | ||||
| CVE-2026-72460 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: check label build before no_new_privs test aa_change_profile() builds a replacement label with fn_label_build_in_scope() before the no_new_privs subset check. The build helper can fail and return NULL or an ERR_PTR, but the result was passed to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL() check. Reuse the existing target-label build failure handling immediately after the build. This preserves the current audit handling while preventing the subset helper from dereferencing an invalid label. | ||||
| CVE-2026-72455 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix uninitialised pointer passed to audit_log_untrustedstring() Commit 4a134723f9f1 ("apparmor: move check for aa_null file to cover all cases") intrdouced a small bug, where path_name() may pass a potentially uninitialized *name to aa_audit_file() if the path->dentry had been replaced with aa_null.dentry earlier on. This can lead to page fault like one observed on 7.0.2 openSUSE Tumbleweed kernel: [51692.242756] [ T24690] BUG: unable to handle page fault for address: 0000000f00000003 [51692.242762] [ T24690] #PF: supervisor read access in kernel mode [51692.242763] [ T24690] #PF: error_code(0x0000) - not-present page [51692.242765] [ T24690] PGD 0 P4D 0 [51692.242768] [ T24690] Oops: Oops: 0000 [#1] SMP NOPTI [51692.242772] [ T24690] CPU: 3 UID: 1020 PID: 24690 Comm: snap-confine Tainted: G O 7.0.2-1-default #1 PREEMPT(full) openSUSE Tumbleweed ab90b4c9940707f9cafa19bdad80b2cec52dbe51 [51692.242775] [ T24690] Tainted: [O]=OOT_MODULE [51692.242777] [ T24690] Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP05, BIOS 03.18 01/08/2026 [51692.242778] [ T24690] RIP: 0010:strlen+0x4/0x30 [51692.242783] [ T24690] Code: f7 75 ec 31 c0 e9 17 9f 00 ff 48 89 f8 e9 0f 9f 00 ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 18 48 89 f8 0f 1f 40 00 48 83 c0 01 80 38 00 75 f7 48 [51692.242785] [ T24690] RSP: 0018:ffffd015eb1e3608 EFLAGS: 00010282 [51692.242787] [ T24690] RAX: 0000000000000000 RBX: ffff89796198a360 RCX: 0000000000000000 [51692.242788] [ T24690] RDX: 00000000000000d1 RSI: 0000000f00000003 RDI: 0000000f00000003 [51692.242790] [ T24690] RBP: ffffffffb7ede090 R08: 00000000000005f5 R09: 0000000000000000 [51692.242791] [ T24690] R10: 0000000000000000 R11: 0000000000000000 R12: ffffd015eb1e3700 [51692.242792] [ T24690] R13: ffff8977a22bc380 R14: ffffffffb7ec5190 R15: ffff8977a0c8aa80 [51692.242794] [ T24690] FS: 0000000000000000(0000) GS:ffff897f640d8000(0000) knlGS:0000000000000000 [51692.242796] [ T24690] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [51692.242797] [ T24690] CR2: 0000000f00000003 CR3: 00000006ad15f000 CR4: 0000000000f50ef0 [51692.242799] [ T24690] PKRU: 55555554 [51692.242800] [ T24690] Call Trace: [51692.242802] [ T24690] <TASK> [51692.242804] [ T24690] audit_log_untrustedstring+0x1d/0x40 [51692.242811] [ T24690] common_lsm_audit+0x71/0x1d0 [51692.242816] [ T24690] aa_audit+0x5a/0x170 [51692.242819] [ T24690] aa_audit_file+0x18a/0x1b0 [51692.242825] [ T24690] path_name+0xd2/0x100 [51692.242829] [ T24690] profile_path_perm.part.0+0x58/0xb0 [51692.242832] [ T24690] aa_path_perm+0xef/0x150 [51692.242837] [ T24690] apparmor_file_open+0x153/0x2e0 [51692.242840] [ T24690] security_file_open+0x46/0xd0 [51692.242844] [ T24690] do_dentry_open+0xe9/0x4d0 [51692.242848] [ T24690] vfs_open+0x30/0x100 While here, initialise variables which are passed down to path_name(). | ||||
| CVE-2026-72454 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are enabled or disabled, so that it always reflects the set of devices allowed to generate IBIs. Also update when IBIs are freed, to cover the corner case when an IBI is freed without first being disabled (e.g. oldedev in i3c_master_add_i3c_dev_locked()). Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new array, and add a lockdep assertion to enforce that hci->lock is held by callers. Demote a message in PIO and DMA IBI handling, from an error to a debug message, because there is a race window when the condition can arise normally. | ||||
| CVE-2026-72452 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: clear CRTC color blob pointers after dropping refs intel_crtc_put_color_blobs() drops the CRTC color blob references, but leaves the corresponding pointers unchanged. This can matter in intel_crtc_prepare_cleared_state(), which frees the old CRTC hw state before calling intel_dp_tunnel_atomic_clear_stream_bw(). The latter can fail while looking up the DP tunnel group state, for example with -EDEADLK. If that happens, the function returns without completing the cleared state preparation. The failed atomic state will then be cleared by the atomic core and intel_crtc_free_hw_state() can be called again for the same state, dropping the same blob references again. Clear the blob pointers after dropping the references so repeated cleanup of the same CRTC hw state is safe. (cherry picked from commit d5005addb5f68e8a0edce249506757bdc9e3d8c8) | ||||
| CVE-2026-72451 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix xfrm state cache insertion race The xfrm input state cache insertion code checks the validity of the state before acquiring the global xfrm_state_lock. Thus it's possible for someone else to kill the state after it passed the validity check, and then the insertion will add the dead state to the cache. Fix this by moving the validity check inside the lock. This entire function is called on the input path, where BH must be off (e.g., the caller of this function xfrm_input acquires its spinlocks without disabling BH). So there is no need to disable BH here or take the RCU read lock. Remove both and replace them with an assertion that trips if BH is accidentally enabled on some future calling path. | ||||
| CVE-2026-72450 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow). | ||||
| CVE-2026-72449 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm The cleanup tail of kfd_criu_resume_svm() walks svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata without removing it from the list. The list head is left pointing at freed kmalloc-96 objects. A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty() reads the dangling ->next (use-after-free), the loop walks freed entries, and each is kfree()'d again (double-free). This is reachable by an unprivileged render-group user via /dev/kfd with no capabilities required. Add list_del() before the kfree() so the list is properly emptied. The list_for_each_entry_safe() iterator already caches the next pointer, so unlinking during the walk is safe. (cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1) | ||||
| CVE-2026-72446 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | ||||
| CVE-2026-72444 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: check device type before reading ETH_ADDRS __skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb) when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb has a valid Ethernet header at mac_header, which is not always the case. The problem can be triggered by: 1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0) 2. Attaching a multiq qdisc with a flower filter matching on eth_src 3. Sending a packet through AF_PACKET Since TUN in L3 mode has no link-layer header, mac_header points to the L3 data area. The flow dissector reads 12 bytes of uninitialized skb memory, which then propagates through fl_set_masked_key() and is used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN. Rejecting the filter in the control path (at tc filter add time) is not feasible because TC filter blocks can be shared between arbitrary devices -- a filter installed on an Ethernet device may later classify packets on a headerless device through a shared block. The device association is not fixed at filter creation time. Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which ensures only true Ethernet-framed packets have their addresses read. This is more precise than the previous hard_header_len >= 12 check, which would incorrectly pass for non-Ethernet link types like IPoIB (ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21) whose L2 headers are not in Ethernet format. Additionally check skb_mac_header_was_set() to guard against the pathological case where mac_header is the unset sentinel (~0U), which would cause eth_hdr() to return a wild pointer. For the act_mirred redirect case (Ethernet packet redirected to a non-Ethernet device sharing a TC block), zeroing the key is the correct behavior: the packet is now being classified on the target device, where Ethernet address matching is not semantically meaningful. Note: on non-Ethernet devices, the zeroed key will match a filter configured with all-zero MAC addresses. This is an improvement over the previous behavior where uninitialized memory could randomly match any filter. | ||||
| CVE-2026-72442 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: fix and simplify IP6IP6 tunnel handling Fix nf_flow_ip6_tunnel_proto() to use pskb_may_pull() instead of skb_header_pointer() to ensure the outer IPv6 header is in the skb headroom, which is required for subsequent packet processing. Move ctx->offset update inside the IPPROTO_IPV6 conditional block since it should only be adjusted when an IP6IP6 tunnel is actually detected. Simplify the rx path by removing ipv6_skip_exthdr() and checking ip6h->nexthdr directly, as the flowtable fast path only handles simple IP6IP6 encapsulation without extension headers. Drop the tunnel encapsulation limit destination option support from the tx path to match, since the rx path no longer handles extension headers. Remove the encap_limit parameter from nf_flow_offload_ipv6_forward(), nf_flow_tunnel_ip6ip6_push() and nf_flow_tunnel_v6_push(), along with the ipv6_tel_txoption struct and related headroom/MTU adjustments. | ||||
| CVE-2026-72438 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending and barrier reference leaks on discard failures raid10_make_request() acquires a writes_pending reference with md_write_start() before calling raid10_handle_discard(). Several failure paths in raid10_handle_discard() complete the bio and return without releasing the corresponding reference, causing md_write_end() to be skipped. Call md_write_end() before returning from these failure paths to keep writes_pending accounting balanced. Additionally, discard split allocation failures can occur after wait_barrier() succeeds. Those paths return without calling allow_barrier(), leaking the associated barrier reference. Release the barrier before returning from those paths. | ||||
| CVE-2026-72436 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types Sashiko pointed out that there are a few lockless RCU readers using test_bit() which is a relaxed atomic operation and provides no memory barrier guarantees. Use test_bit_acquire() instead where the operation may run parallel with add/del/gc, i.e. is not one from the next cases - protected by region lock - in a set destroy phase - in a new/temporary set creation phase | ||||
| CVE-2026-72434 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: make sure gc is properly stopped Sashiko noticed that when destroying a set, cancel_delayed_work_sync() was called while gc calls queue_delayed_work() unconditionally which can lead not to properly shutting down the gc. | ||||