Export limit exceeded: 370037 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370037 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72415 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: Validate written enum value in ge_put_enum_double() ge_put_enum_double() passes the user-supplied enumeration index item[0] to snd_soc_enum_item_to_val() without checking it against the number of items in the enum: ret = snd_soc_enum_item_to_val(e, item[0]); snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array with that index (e->values is set from a devm_kcalloc() of e->items entries), so a control write with an out-of-range item[0] reads past the end of the values buffer. The bounds check in snd_soc_dapm_put_enum_double() only runs afterwards, so it does not prevent the read here. Reject an out-of-range item before using it, matching the other enum put handlers. This issue was pointed out by the Sashiko AI review bot while reviewing a related enum-validation series: https://lore.kernel.org/all/20260609125735.CEB651F00893@smtp.kernel.org/ | ||||
| CVE-2026-72412 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes. | ||||
| CVE-2026-72411 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work Upon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports and closes the CPU port conduits: dsa_switch_for_each_cpu_port(dp, priv->ds) dev_close(dp->conduit); mxl862xx_remove() unregisters the switch before cancelling this work: set_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags); cancel_delayed_work_sync(&priv->stats_work); dsa_unregister_switch(ds); mxl862xx_host_shutdown(priv); dsa_unregister_switch() frees the dsa_port objects. If a CRC error schedules the work during teardown it can run after the ports have been freed and dereference freed memory. Guard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set before dsa_unregister_switch(). DSA tears the ports down under rtnl_lock(), so checking the flag under rtnl_lock() means the work either runs before teardown and sees valid ports, or runs afterwards, observes the flag and skips the walk. This mirrors the host_flood_work handler, which skips torn-down ports under rtnl_lock(). | ||||
| CVE-2026-72410 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Validate NIX maximum LFs correctly NIX maximum number of LFs can be set via devlink command but that can be done before assigning any LFs to a PF/VF. The condition used to check whether any LFs are assigned is incorrect. This patch fixes that condition. | ||||
| CVE-2026-72409 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mvneta: re-enable percpu interrupt on resume On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules NAPI poll, which calls enable_percpu_irq() on completion to unmask. If suspend occurs while NAPI poll is pending (between disable_percpu_irq in the ISR and enable_percpu_irq in poll completion), the interrupt is never re-enabled: 1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule() => MPIC masked, percpu_enabled cpumask bit cleared 2. NAPI poll does not complete before suspend proceeds (on PREEMPT_RT this is highly likely since softirqs run in ksoftirqd which gets frozen; on non-RT it can happen when softirq processing is deferred to ksoftirqd) 3. mvneta_stop_dev => napi_disable(): cancels the pending poll without executing the completion path 4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC (already masked, but records IRQS_SUSPENDED) 5. Resume: mpic_resume checks irq_percpu_is_enabled() => false (bit was cleared in step 1) => skips unmask 6. mvneta_start_dev only restores device-level INTR_NEW_MASK, does not touch the MPIC per-CPU mask Result: MPIC per-CPU interrupt stays masked permanently. The NIC generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never receives them, causing complete loss of network connectivity. Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path to unconditionally unmask the MPIC per-CPU interrupt regardless of pre-suspend state. | ||||
| CVE-2026-72408 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(), which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT (gs->gro_hint). geneve_gro_complete() instead calls the low-level geneve_opt_gro_hint_off() and acts on the hint unconditionally. On a tunnel without the hint, receive aggregates the frames as plain ETH_P_TEB while complete still honours an attacker-supplied hint option: it inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch type, so the inner gro_complete handler runs at nhoff + gh_len, an offset receive never pulled nor validated, reading out of bounds of the skb head: BUG: KASAN: slab-out-of-bounds in ipv6_gro_complete (net/ipv6/ip6_offload.c:196) Read of size 1 at addr ffff88800fe91980 by task exploit/153 ipv6_gro_complete (net/ipv6/ip6_offload.c:196) geneve_gro_complete (drivers/net/geneve.c:965) udp_gro_complete (net/ipv4/udp_offload.c:940) inet_gro_complete (net/ipv4/af_inet.c:1621) __gro_flush (net/core/gro.c:306) Gate the complete path on gs->gro_hint too via geneve_sk_gro_hint_off(), so both paths agree. Tunnels that enable the hint are unaffected. | ||||
| CVE-2026-72407 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: validate inner network offset in geneve_gro_complete() Even with both paths gated on gs->gro_hint, geneve_gro_complete() re-derives the inner dispatch type and length from the packet and the current gs->gro_hint, independently of geneve_gro_receive(). The two can disagree if gs->gro_hint flips under a concurrent geneve_quiesce()/ geneve_unquiesce() (sk_user_data is NULL across a synchronize_net()), or if the re-read option bytes differ from the ones receive parsed. geneve_gro_receive() already records the inner network header position in NAPI_GRO_CB()->inner_network_offset. Have geneve_gro_complete() compute the offset it is about to dispatch at, adding ETH_HLEN in the ETH_P_TEB case where eth_gro_complete() steps over the inner MAC header, and bail out if it lands past inner_network_offset. Use a lower bound rather than exact equality: between gh_len and the inner L3 header, geneve_gro_receive() may also have pulled an inner VLAN tag (vlan_gro_receive() advances the recorded offset past it), which only moves inner_network_offset further out. A valid frame therefore always satisfies inner_nh <= inner_network_offset, while a gh_len inflated by a hint gro_receive() did not honour dispatches past the validated inner header, i.e. the out-of-bounds completion. Only the latter is rejected. | ||||
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||
| CVE-2026-72405 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync Yue Sun reported a use-after-free and debugobjects warning in udp_tunnel_nic_device_sync_work() during concurrent device operations. The workqueue core clears the internal pending bit before invoking the worker. At that point, a concurrent thread can queue the work again. When the already running worker eventually clears the work_pending flag to 0, it mistakenly clears the flag for the newly queued instance. udp_tunnel_nic_unregister() then observes work_pending as 0 and frees the structure while the second work item is still active in the queue, leading to UAF. Fix this by returning early in udp_tunnel_nic_device_sync() if work_pending is already set, preventing redundant work queueing. | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-72400 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: seg6: validate SRH length before reading fixed fields seg6_validate_srh() reads fixed SRH fields such as srh->type and srh->hdrlen before checking that the supplied length covers the fixed struct ipv6_sr_hdr fields. The BPF SEG6 encap path reaches this with a BPF program-supplied pointer and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6 encap header can therefore make the validator read srh->type at offset 2 beyond the caller-supplied buffer. Reject lengths shorter than the fixed SRH at the top of seg6_validate_srh(), before any field is read. This fixes the BPF helper path and keeps the common validator robust. | ||||
| CVE-2026-72399 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: check the number of BDs needed for xdp_frame The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the number of fragments contained in xdp_frame may be greater than or equal to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr to be out of bounds. | ||||
| CVE-2026-72398 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: add INIT verification after cookie unpacking In SCTP handshake, the INIT chunk is initially processed by the server and embedded into the cookie carried in INIT-ACK. The client then returns this cookie via COOKIE-ECHO, where the server unpacks it and reconstructs the original INIT chunk. When cookie authentication is enabled, the cookie contents are protected against tampering, so reusing the unpacked INIT without re-verification is safe. However, when cookie authentication is disabled, the reconstructed INIT can no longer be trusted. In this case, the INIT must be explicitly validated after unpacking to avoid processing potentially tampered data. Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook()) when cookie_auth_enable is disabled. On failure, the new association is freed and the packet is discarded. Also tighten cookie validation in sctp_unpack_cookie() by verifying the embedded chunk type is SCTP_CID_INIT before treating it as an INIT chunk. Finally, update sctp_verify_init() to validate parameter bounds using the actual embedded INIT length instead of chunk->chunk_end, since the INIT stored in COOKIE-ECHO may not span the entire chunk buffer. | ||||
| CVE-2026-72397 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the vrm_version configured by the driver, while pmbus_reg2data_vid() already switched on it. Any driver that selects a non-VR11 VID mode and exposes a regulator (or hwmon vout setter) sent dangerously wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the chip interprets as 1080 mV. Mirror pmbus_reg2data_vid() so writes round-trip with reads. | ||||
| CVE-2026-72395 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix passing events to regulator core Sashiko reports: Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with mutex") introduced a worker to batch regulator events over time using atomic_or(). The delayed worker then passes the combined bitmask unmodified to regulator_notifier_call_chain(). The core regulator subsystem's regulator_handle_critical() function evaluates the event parameter using a strict switch statement. If multiple distinct faults occur before the worker runs (e.g., REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined bitmask fails to match any case. This leaves the reason as NULL and completely bypasses the critical hw_protection_trigger(). Fix the problem by passing events bit by bit to the regulator event handler. | ||||
| CVE-2026-72393 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: don't cache shinfo across skb realloc fbnic_tx_lso() calls skb_cow_head() which may reallocate the skb including the shared info. We can't use the pointer calculated before the call. BUG: KASAN: slab-use-after-free in fbnic_tx_lso.isra.0+0x668/0x8e0 Read of size 4 at addr ff110000262edd98 by task swapper/5/0 Call Trace: fbnic_tx_lso.isra.0+0x668/0x8e0 fbnic_xmit_frame+0x622/0xba0 dev_hard_start_xmit+0xf4/0x620 Allocated by task 8653: __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xcc/0x6c0 sock_alloc_send_pskb+0x327/0x3f0 __ip_append_data+0x188b/0x47a0 ip_make_skb+0x24a/0x300 udp_sendmsg+0x14d2/0x21e0 Freed by task 0: kfree+0x123/0x5a0 pskb_expand_head+0x36c/0xfa0 fbnic_tx_lso.isra.0+0x500/0x8e0 fbnic_xmit_frame+0x622/0xba0 dev_hard_start_xmit+0xf4/0x620 sch_direct_xmit+0x25b/0x1100 The buggy address belongs to the object at ff110000262edc40 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 344 bytes inside of freed 640-byte region [ff110000262edc40, ff110000262ede | ||||
| CVE-2026-72390 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF The teql master->slaves singly linked list is not protected against multiple writes. It can be mod'ed concurently from teql_master_xmit(), teql_dequeue(), teql_init() and teql_destroy() without holding any list lock or RCU protection. zdi-disclosures@trendmicro.com has demonstrated that the qdisc is freed after an RCU grace period, but teql_master_xmit() running on another CPU can still hold a stale pointer into the list, resulting in a slab-use-after-free: BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0 Read of size 8 at addr ffff888013fb0440 by task poc/332 Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512) The fix? Add a per-master slaves_lock spinlock that serializes all mutations of master->slaves and the NEXT_SLAVE() links in teql_destroy() and teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock around those updates. Annotate master->slaves and the per-slave ->next pointer with __rcu and use the appropriate RCU accessors everywhere they are touched: rcu_assign_pointer() on the writer side (under slaves_lock), rcu_dereference_protected() for the writer-side loads (also under slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(), which run under RTNL. Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list traversal in teql_master_xmit(), so that readers either observe a fully linked list or are deferred until the in-flight mutation completes. The two early-return paths in teql_master_xmit() are updated to release the RCU-bh read-side critical section before returning, since leaving it held would disable BH on that CPU for good. | ||||
| CVE-2026-72389 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: stp: Fix a potential use-after-free when deleting a bridge The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 | ||||
| CVE-2026-72383 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix addr_wq_timer race in sctp_free_addr_wq() sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete() while holding addr_wq_lock. However, timer_delete() does not guarantee that a currently running timer handler has completed. This allows a race with sctp_addr_wq_timeout_handler(), where the handler may still run after addr_waitq has been freed, acquire addr_wq_lock, and access freed memory, leading to a use-after-free. Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This guarantees that any in-flight timer handler has finished and prevents the timer from being re-armed during teardown, making subsequent cleanup safe. | ||||
| CVE-2026-72382 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject undersized DACLs before parsing ACEs parse_dacl() limits the attacker-controlled ACE count by comparing it with the number of minimal ACEs that fit in the DACL size. The DACL size field is 16 bits, but the expression subtracts sizeof(struct smb_acl). Because sizeof() is unsigned, a DACL size smaller than the ACL header underflows to a large size_t. A malicious client can reach this with: SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY) -> smb2_set_info_sec() -> set_info_sec() -> parse_sec_desc() -> parse_dacl() -> init_acl_state(..., 0xffff) -> init_acl_state(..., 0xffff) -> kmalloc_objs(..., 0xffff) Thus a malformed security descriptor can make num_aces pass the guard and drive large temporary ACL state and pointer-array allocations. Reject DACLs smaller than struct smb_acl before doing the subtraction, so the ACE count check cannot be bypassed by the underflow. | ||||