Export limit exceeded: 370136 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370136 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370136 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370136 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370136 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74306 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/qat: fix f_pos race in qat_vf_resume_write() qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but copies into the migration-state buffer after taking the lock and re-reading the shared file position. Two concurrent writers could therefore pass the bounds check with the old offset, then have the second writer copy after the first advanced f_pos, writing past the end of the migration-state buffer. Take migf->lock before doing the boundary checks. | ||||
| CVE-2026-74311 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: tear down old virtqueues before restore virtio_device_restore() resets the device and restores the negotiated features before calling ->restore(). viortc_freeze() intentionally leaves the existing virtqueues in place so the alarm queue can still wake the system, but viortc_restore() immediately calls viortc_init_vqs() without first deleting those old queues. If virtqueue reinitialization fails on virtio-pci, the transport error path can run vp_del_vqs() against a newly allocated vp_dev->vqs array while vdev->vqs still contains the old virtqueues. vp_del_vqs() then looks up queue state through the new array and can dereference a NULL info pointer in vp_del_vq(), crashing the guest kernel during restore. This can also happen during a non-faulty reinitialization, when one of the vp_find_vqs_msix() attempts is unsuccessful before a later attempt would succeed. Delete the stale virtqueues before rebuilding them. If restore fails before virtio_device_ready(), reuse the remove path to stop the device. Once the device is ready, return errors directly instead of deleting the virtqueues again. | ||||
| CVE-2026-74312 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: validate virtqueue index in mmap and fault paths vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a virtqueue index for get_vq_notification(), but they do not validate that the index is smaller than v->nvqs. The ioctl path already performs both a bounds check and array_index_nospec(), but the mmap/fault path only checks that the index fits in u16. This allows an out-of-range queue index to reach driver-specific get_vq_notification() callbacks. Fix this by extracting a unified vhost_vdpa_get_vq_notification() helper that validates the queue index against v->nvqs and applies array_index_nospec() before calling the driver callback. Both the mmap and fault paths use this helper, and the bounds checking is consolidated into a single location. From source inspection, the most defensible impact is out-of-bounds access in the callback path, potentially leading to invalid PFN remaps and crash/DoS. | ||||
| CVE-2026-74314 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Cancel special fields on map value recycle Map update and delete paths currently call bpf_obj_free_fields() when a value is being replaced or recycled. That makes field destruction depend on the context of the update/delete operation. For tracing programs this can include NMI context, where referenced kptr destructors, uptr unpinning, and graph root destruction are not generally safe. Introduce bpf_obj_cancel_fields() for the reusable-value path. It only performs NMI-safe cleanup for timer, workqueue, and task_work fields. Fields that need full destruction are left attached to the recycled value and are destroyed by the final cleanup path instead. Switch array and hashtab update/delete/recycle paths to this cancel helper. Keep bpf_obj_free_fields() for final map destruction and for bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator destructors, so teardown continues to walk the normal and extra elements and fully destroy their fields. This deliberately relaxes the eager-free semantics of map update/delete for special fields. Programs that relied on a recycled map slot becoming empty immediately after update/delete were relying on behavior that cannot be implemented safely from every BPF execution context without offloading arbitrary destructors. There is a chance this change breaks programs making assumptions regarding the eager freeing of fields. If so, we can relax semantics to cancellation only when irqs_disabled() is true in the future. However, theoretically, map values that get reused eagerly already have weaker guarantees as parallel users can recreate freed fields before the new element becomes visible again. | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-74325 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree() after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents future RCU readers from obtaining the pointer -- it does not wait for existing readers that already hold it via rcu_dereference. The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer via rcu_dereference just before the NULL assignment, it will dereference freed memory after the kfree. struct mt76_vif_link already contains an rcu_head field that is unused at this free site -- a developer oversight, since the adjacent kfree_rcu_mightsleep call for rx_sc in the same function shows the pattern was understood. Replace kfree(mlink) with kfree_rcu(mlink, rcu_head). | ||||
| CVE-2026-74345 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix endpoint/socket association handling Disassociating a socket from an endpoint via siw_socket_disassoc() may release the last reference on that endpoint and free it. Therefore, don't clear the endpoints socket pointer after calling that function, but within. This fixes a: BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075) which occurred after processing a malformed MPA request during connection establishment, causing the new endpoint to be closed. | ||||
| CVE-2026-74355 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE(). | ||||
| CVE-2026-74503 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Clear SNDRV_TIMER_IFLG_DEAD once the close completes snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD and returns early when the flag is already set, but the flag is never cleared again. A completed close ends in remove_slave_links(), which leaves timeri->timer NULL, so a second close is already harmless through the timer == NULL path; the early return can only be reached by an instance that was opened again in between. For such an instance the close unlinks nothing, so snd_timer_instance_free() frees an object that is still on timer->open_list_head, still on snd_timer_master_list if it was opened with a slave key, still owns any adopted slaves, and still holds its timer and module references. snd_seq_timer_open() reopens an instance exactly like that: it retries its fallback open on the same object after a failure that has already run snd_timer_close_locked() internally. An unprivileged user with access to /dev/snd/timer and /dev/snd/seq can force that failure, since snd_timer_check_master() returns -EBUSY when a pending slave matches the new master's (slave_class, slave_id) key and the target timer has reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class = SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a sequencer queue's key can be forged. The freed instance is afterwards dereferenced by any further snd_timer_open() on that timer, by snd_timer_check_slave(), and by /proc/asound/timers, which faults on the stale ti->owner pointer. The flag only has to be visible while the close is in progress, which is all its other users need. Clear it in remove_slave_links(), under the same timer->lock that sets it, once the instance is off every list. | ||||
| CVE-2026-74507 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. | ||||
| CVE-2026-74508 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it. | ||||
| CVE-2026-74522 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owner's idr, and the owner session later dereferences the stale pointer during file-table teardown. Remove the volatile id from the owner's idr while ksmbd_close_fd() still holds that table's lock, and clear volatile_id before dropping the idr-owned reference. A later foreign final put then only performs physical destruction and cannot remove the object from the wrong table. | ||||
| CVE-2026-74523 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: qede: sync udp_tunnel ports outside qede_lock in the recovery path A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports configured wedges the rtnetlink control plane of the whole machine: NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2! [qede_recovery_handler:2665(ens6f0)]Starting a recovery process The recovery path deadlocks on the driver's own mutex: qede_sp_task rtnl_lock() mutex_lock(&edev->qede_lock) <- taken qede_recovery_handler qede_load udp_tunnel_nic_reset_ntf __udp_tunnel_nic_device_sync info->sync_table == qede_udp_tunnel_sync mutex_lock(&edev->qede_lock) <- same task: deadlock The mutex is not recursive, so the kworker blocks on itself with rtnl_lock held, and neither lock is ever released. Every task that calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6 addrconf, sshd) blocks forever while the node still answers ping. In a vmcore from an affected production node rtnl_mutex.owner decodes to the very kworker blocked at the innermost mutex_lock() above. Re-sync the tunnel ports from qede_sp_task() after the internal lock is dropped, still under rtnl_lock as the udp_tunnel API requires. This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf() under rtnl without the internal lock. qede_recovery_handler() now returns whether it has successfully reloaded an open device, and the caller re-syncs the ports only in that case. This keeps the old gating exactly: a device that was down or a failed recovery returns false, as those paths never reached the udp_tunnel_nic_reset_ntf() call before either. This was the only user of the qede_lock()/qede_unlock() helpers, so remove them. | ||||
| CVE-2026-74529 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-74541 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: clear iso_data always when detaching conn from hcon When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is necessary, otherwise later iso_conn_free() will UAF. Fix clearing of iso_data in iso_sock_disconn() Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on iso_sock_release() followed by hci_abort_conn_sync(). | ||||
| CVE-2026-74563 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check() rds_tcp_laddr_check() looks up a scoped IPv6 interface with dev_get_by_index_rcu(), drops the RCU read-side lock, and only then passes the bare struct net_device * into ipv6_chk_addr(). dev_get_by_index_rcu() only keeps the device alive within the same RCU read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can free the net_device; ipv6_chk_addr() then dereferences the stale pointer in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading freed memory. Keep the RCU read-side lock held across the ipv6_chk_addr() call instead of dropping it right after the lookup, so the device cannot be freed while it is in use. BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) Read of size 8 at addr ffff8880106ec000 by task exploit/153 Call Trace: ... kasan_report (mm/kasan/report.c:595) __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972) rds_tcp_laddr_check (net/rds/tcp.c:370) rds_bind (net/rds/bind.c:248) __sys_bind (net/socket.c:1920) __x64_sys_bind (net/socket.c:1956) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-18847 | 1 Ibm | 1 I | 2026-08-17 | 8.8 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote unauthenticated attacker to harvest credentials due to spoofing of Navigator for i. | ||||
| CVE-2025-36298 | 3 Ibm, Linux, Microsoft | 5 Aix, Sterling B2b Integrator, Sterling File Gateway and 2 more | 2026-08-17 | 5.4 Medium |
| IBM Sterling B2B Integrator 6.1.2.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 and IBM Sterling File Gateway 6.1.2.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 Ebics server component is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | ||||
| CVE-2026-59911 | 2026-08-17 | 5.5 Medium | ||
| Dell ObjectScale, versions prior to 4.3.0.1, contain(s) an Insertion of Sensitive Information into Log File vulnerability in the svc_tools. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure. | ||||
| CVE-2026-18378 | 2 Red Hat, Redhat | 3 Cost Management Metrics Operator, Cost Management, Cost Management Metrics Operator | 2026-08-17 | 7.6 High |
| A flaw was found in koku-metrics-operator. The operator's CostManagementMetricsConfig custom resource allows user able to edit the CR to specify an arbitrary upload URL. When authentication.type is set to token (the default), the cluster-global Red Hat Cloud pull-secret bearer token is attached to HTTP requests sent to this user-controlled URL, allowing the attacker to obtain the token. | ||||