Export limit exceeded: 377125 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377125 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80606 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/userptr: Hold notifier_lock for write on inject test path When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit() runs vma_check_userptr() with the svm notifier_lock taken for read. The test injection causes vma_check_userptr() to call xe_vma_userptr_force_invalidate(), which feeds into xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That flag tells drm_gpusvm_unmap_pages() the caller already holds notifier_lock for write and only asserts the mode. Because the caller actually holds it for read, the assertion fires: WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \ drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper] Call Trace: xe_vma_userptr_do_inval+0x40d/0xfd0 [xe] xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe] xe_vma_userptr_force_invalidate+0xde/0x290 [xe] vma_check_userptr.constprop.0+0x1c6/0x220 [xe] xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe] ... xe_vm_bind_ioctl+0x3a0a/0x4480 [xe] Acquire notifier_lock for write in pre-commit when the inject Kconfig is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock(). Rename xe_svm_assert_held_read() to xe_svm_assert_held_read_or_inject_write() so it asserts the correct mode under each build configuration. Production builds (CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode behavior bit-for-bit. (cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) | ||||
| CVE-2026-80637 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options(). | ||||
| CVE-2026-80653 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]--- During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influences __device_links_no_driver() before driver rmmod and caused WARNING. Add the slave_destroy interface to make sure link is removed after flush workque. | ||||
| CVE-2026-80675 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: libbpf: Reject non-exclusive metadata maps in the signed loader The loader verifies map->sha against the metadata hash in its instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is called on the frozen map. While the map is frozen, the /signed loader/ must also ensure the map is exclusive, as, without exclusivity (which a hostile host could just omit when loading the loader), another BPF program with map access can mutate the contents afterwards, so the check passes on stale data. With the extra check as part of the signed loader, it now refuses to move on with map->sha validation if the host set it up wrongly. | ||||
| CVE-2026-80680 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error. | ||||
| CVE-2026-80714 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: do not propagate one-packet flag to synced conns Synced connections can be created before their destination exists. When the destination is later added, ip_vs_bind_dest() copies connection flags from the destination into cp->flags. IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed, expiry can treat it as a one-packet connection and skip unlinking the existing conn_tab node, leaving stale hash nodes pointing at a freed struct ip_vs_conn. Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced connections. | ||||
| CVE-2026-80722 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact] | ||||
| CVE-2026-80628 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Serialize readq reset state with q->lock snd_seq_oss_readq_clear() resets qlen, head, and tail without q->lock even though the normal reader and producer paths serialize the same ring state under that spinlock. A reset can therefore race snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave stale records in the queue, drop freshly queued ones, or report the wrong readiness after wakeup. KCSAN reports a data race between snd_seq_oss_readq_clear() and snd_seq_oss_readq_free(). Take q->lock while clearing the ring and resetting input_time. Factor the enqueue logic into a caller-locked helper so snd_seq_oss_readq_put_timestamp() updates its suppression state under the same lock instead of racing the reset path. The buggy scenario involves two paths, with each column showing the order within that path: reset path: locked readq updater: 1. snd_seq_oss_reset() or 1. A reader or callback producer release reaches takes q->lock on the same queue. snd_seq_oss_readq_clear(). 2. snd_seq_oss_readq_clear() 2. The updater tests or modifies resets qlen, head, tail, qlen, head, and tail. and input_time. 3. snd_seq_oss_readq_clear() 3. The updater completes its wakes sleepers on read-modify-write sequence. q->midi_sleep. 4. Without q->lock, the reset 4. The resulting ring state drives can overlap the locked later reads and readiness. update. KCSAN reports: BUG: KCSAN: data-race in snd_seq_oss_readq_clear / snd_seq_oss_readq_free write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0: snd_seq_oss_readq_free+0x6c/0x80 snd_seq_oss_read+0xcb/0x250 odev_read+0x38/0x60 vfs_read+0xff/0x600 ksys_read+0xb4/0x140 __x64_sys_read+0x46/0x60 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1: snd_seq_oss_readq_clear+0x1f/0x90 snd_seq_oss_reset+0xa7/0xf0 snd_seq_oss_ioctl+0x6f6/0x7e0 odev_ioctl+0x56/0xc0 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000001 -> 0x00000000 | ||||
| CVE-2026-80631 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject compressed segment that overflows the compressed input lzo_decompress_bio() validates each on-disk segment length seg_len only against the workspace cbuf size, not against the compressed input size (compressed_len, the total folio bytes of the bio). A crafted extent can carry a segment whose seg_len passes the cbuf check but runs past the end of the bio, so copy_compressed_segment() walks off the last folio: get_current_folio() then returns the NULL folio from bio_next_folio(), and with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults. BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383) Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29 Workqueue: btrfs-endio simple_end_io_work kasan_report (mm/kasan/report.c:590) lzo_decompress_bio (fs/btrfs/lzo.c:383) end_bbio_compressed_read (fs/btrfs/compression.c:1065) btrfs_bio_end_io (fs/btrfs/bio.c:135) btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285) simple_end_io_work process_one_work worker_thread Reject any segment whose payload would extend beyond compressed_len before copying it, treating it as corruption like the other on-disk validation failures in this function. | ||||
| CVE-2026-80672 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix u16 truncation of restart-area length check ntfs_check_restart_area() validates that the $LogFile restart area and its trailing log client record array fit within the system page size: u16 ra_ofs, ra_len, ca_ofs; ... ra_len = ca_ofs + le16_to_cpu(ra->log_clients) * sizeof(struct log_client_record); if (ra_ofs + ra_len > le32_to_cpu(rp->system_page_size) || ...) return false; ra_len is u16, but the right-hand side is computed in size_t (sizeof(struct log_client_record) == 160). Both ca_ofs and log_clients come straight from the on-disk restart area. With an on-disk log_clients of 410 the product 410 * 160 = 65600; adding ca_ofs and storing into the u16 ra_len truncates modulo 65536 (e.g. ca_ofs 64 gives ra_len 128), so the "fits in the page" check passes even though the client array described by log_clients extends far beyond the page. ntfs_check_log_client_array() then walks the array bounded only by the on-disk log_clients count: cr = ca + idx; if (cr->prev_client != LOGFILE_NO_CLIENT) ... For log_clients 410 it dereferences records up to ca + 409 * 160, ~64 KiB past the kvzalloc(system_page_size) restart-page buffer -- an out-of-bounds read of attacker-controlled extent, reachable when a crafted NTFS image is mounted (load_and_check_logfile() at mount time). This is the in-kernel analogue of CVE-2022-30789, fixed in the ntfs-3g userspace driver but never in this revived classic driver. Compute the restart-area length in a u32 so the existing bounds check rejects an over-large client array instead of being defeated by the truncation. Widen ra_ofs and ca_ofs to u32 as well: both are loaded from __le16 on-disk fields and every comparison already promotes to int/size_t, so this changes no result and keeps the declaration uniform. | ||||
| CVE-2026-80717 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate Adaptation Indication parameter length The Adaptation Layer Indication parameter contains a fixed 32-bit Adaptation Code Point after its parameter header. However, sctp_verify_param() accepts a header-only parameter because the generic parameter walker only requires the header to be present. sctp_process_param() then reads adaptation_ind beyond the declared parameter. When the malformed parameter is last in an INIT, the read starts at the receive skb tail, and the value is copied into the state cookie returned in the INIT ACK. This may disclose four receive-buffer tail bytes. Require the declared parameter length to match the fixed structure size and abort the association through the existing invalid parameter length path otherwise. | ||||
| CVE-2026-80649 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix OOB in scmi_power_name_get() scmi_power_name_get() does not validate the domain number passed by the external caller, which may lead to an out-of-bounds access. Fix this by returning "unknown" for invalid domains, like scmi_reset_name_get() does. | ||||
| CVE-2026-80661 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ufs: core: tracing: Do not dereference pointers in TP_printk() The trace events in drivers/ufs/core/ufs_trace.h were converted to take a pointer to the hba structure as an argument for the tracepoint and then in TP_printk() the printing of the dev_name from the ring buffer was converted to using the dev dereferenced pointer from the hba saved pointer. This is not allowed as the TP_printk() is executed at the time the trace event is read from /sys/kernel/tracing/trace file. That can happen literally, seconds, minutes, hours, weeks, days, or even months later! There is no guarantee that the hba pointer will still exist by the time it is dereferenced when the "trace" file is read. Instead, save the device name from the hba pointer at the time the tracepoint is called and place it into the ring buffer event. Then the TP_printk() can read the name directly from the ring buffer and remove the possibility that it will read a freed pointer and crash the kernel. This was detected when testing the trace event code that looks for TP_printk() parameters doing illegal derferences[1] [1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ | ||||
| CVE-2026-80685 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole). | ||||
| CVE-2026-80691 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE In the iblock_execute_pr_out() function, PRO_PREEMPT, PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability checks through ops->pr_clear. The error check allows unimplemented hooks to pass through the gate, resulting dereferencing a NULL function pointer. Check whether the hooks that need to be called are supported. | ||||
| CVE-2026-80600 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||
| CVE-2026-80678 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Fix slave registration race and error handling In i2c_imx_reg_slave(), the slave pointer was assigned before pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed, the error path returned without clearing i2c_imx->slave, leaving it non-NULL and causing all subsequent registration attempts to fail with -EBUSY. Additionally, because this driver uses a shared IRQ, the interrupt handler i2c_imx_isr() can execute concurrently and, after acquiring slave_lock, dereference i2c_imx->slave. The previous fix attempt added a lockless i2c_imx->slave = NULL on the error path, but that could race with the ISR under the lock and still cause a NULL pointer dereference. Fix both issues by deferring the assignment of i2c_imx->slave and i2c_imx->last_slave_event to after a successful resume, and by performing the assignment inside the slave_lock critical section. This guarantees that the slave pointer is never left stale on the error path and is always valid when observed by the interrupt handler. | ||||
| CVE-2026-80721 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference. | ||||
| CVE-2026-80615 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dst_metadata: fix false-positive memcpy overflow in tun_dst_unclone kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the structure to the options_len, which is then initialized to zero. Later, we're initializing the structure by copying the tunnel info together with the options, and this triggers a warning for a potential memcpy overflow, since the compiler estimates that the options can't fit into the structure, even though the memory for them is actually allocated. memcpy: detected buffer overflow: 104 byte write of buffer size 96 WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report skb_tunnel_info_unclone+0x179/0x190 geneve_xmit+0x7fe/0xe00 The issue is triggered when built with clang and source fortification. Fix that by doing the copy in two stages: first - the main data with the options_len, then the options. This way the correct length should be known at the time of the copy. It would be better if the options_len never changed after allocation, but the allocation code is a little separate from the initialization and it would be awkward and potentially dangerous to return a struct with options_len set to a non-zero value from the metadata_dst_alloc(). Another option would be to use ip_tunnel_info_opts_set(), but it is doing too many unnecessary operations for the use case here. | ||||
| CVE-2026-80630 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever fq_codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though fq_codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a recent report [1] and a wild memory access in qfq: [ 29.371146][ T360] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 29.371666][ T360] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 29.371987][ T360] CPU: 6 UID: 0 PID: 360 Comm: tc Not tainted 7.1.0-rc5-00285-gc530e5b2dbc6-dirty #82 PREEMPT(full) [ 29.372384][ T360] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 29.372620][ T360] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 29.373544][ T360] RSP: 0018:ffff888102417370 EFLAGS: 00010216 [ 29.373800][ T360] RAX: 0000000000000000 RBX: ffff88811224d568 RCX: dffffc0000000000 [ 29.374079][ T360] RDX: 1ffff11021fe1543 RSI: ffff88810ff0aa00 RDI: dffffc0000000000 [ 29.374368][ T360] RBP: ffff88811224c280 R08: dead000000000122 R09: 1bd5a00000000024 [ 29.374649][ T360] R10: fffffbfff7940329 R11: fffffbfff7940329 R12: 0000000000000000 [ 29.374926][ T360] R13: dead000000000100 R14: ffff88811224d580 R15: ffff88811224d578 [ 29.375207][ T360] FS: 00007f5b794e5780(0000) GS:ffff88815d1e9000(0000) knlGS:0000000000000000 [ 29.375545][ T360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.375823][ T360] CR2: 000055ffb091f000 CR3: 000000010a305000 CR4: 0000000000750ef0 [ 29.376103][ T360] PKRU: 55555554 [ 29.376258][ T360] Call Trace: [ 29.376401][ T360] <TASK> ... [ 29.376885][ T360] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 29.377074][ T360] qdisc_reset (net/sched/sch_generic.c:1057) [ 29.377414][ T360] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 29.377600][ T360] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 29.378593][ T360] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. [1] http://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ | ||||