Export limit exceeded: 373993 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 373993 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (373993 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74702 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward. | ||||
| CVE-2026-59769 | 2026-08-25 | 9.1 Critical | ||
| FA-50 all versions contain hard-coded credentials. An attacker, who knows the credentials and has access to the vessel's internal network, can operate the settings screen using that credentials to alter the identification number. | ||||
| CVE-2026-18100 | 2026-08-25 | 6.4 Medium | ||
| The MetForm – Contact Form, Survey, Quiz, & Custom Form Builder for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'mf_form_id' Widget Setting in all versions up to, and including, 4.1.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload bypasses Elementor's save-time wp_kses_post filter because it contains no HTML tags, and MetForm's own str_replace transformation of script tags into JavaScript template literal expressions provides an additional delivery path. | ||||
| CVE-2026-16601 | 2026-08-25 | 8.8 High | ||
| The CM Map Locations – Visualize and share your locations in a few clicks plugin for WordPress is vulnerable to Limited Arbitrary File Upload in all versions up to, and including, 2.1.8 via the uploadMedia function. This is due to insufficient file type validation in the upload handler, which performs incomplete extension filtering without MIME-type checks or upload capability verification before passing attacker-supplied files to move_uploaded_file(). This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. The required nonce is exposed to any logged-in Subscriber via the CMLOC_Editor_Images JavaScript object on the front-end location editor page. | ||||
| CVE-2026-78701 | 1 Redhat | 2 Directory Server, Enterprise Linux | 2026-08-25 | 6.5 Medium |
| A flaw was found in 389-ds-base. A remote, authenticated attacker could exploit a vulnerability in the Simple Authentication and Security Layer (SASL) UNBIND process. By sending a specially crafted request, the attacker can cause a connection to stall, leading to resource exhaustion and a Denial of Service (DoS) for the server. | ||||
| CVE-2026-74597 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip6ip6_err() ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the quoted inner IPv6 packet, and then passes the clone to icmpv6_send(). The clone still carries the outer packet's inet6_skb_parm in skb->cb. If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao remains non-zero after skb_pull(). icmpv6_send() later calls mip6_addr_swap(), which uses that stale dsthao offset against the quoted inner packet. A malformed inner destination-options header can then make the HAO lookup and address swap run past the end of the quoted packet and corrupt skb_shared_info. Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the reply path does not reuse metadata left by the outer IPv6 stack. | ||||
| CVE-2026-74641 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. On 7.2.0-rc5 (arm64), mmap() with a large offset: Unable to handle kernel paging request at virtual address fffffdffc45d5ac8 pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] Call trace: snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] __do_fault __handle_mm_fault handle_mm_fault el0_da Reject any offset outside the shared region. The pcm hwdep handler in usx2yhwdeppcm.c computes its address the same way and needs the same bound. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-69665 | 2026-08-25 | N/A | ||
| SKYSEA Client View and SKYMEC IT Manager contain an issue with incorrect default permissions. If this vulnerability is exploited, an attacker who can log in to a Windows system on which the affected product is installed may execute arbitrary code with SYSTEM privilege. | ||||
| CVE-2026-68960 | 2026-08-25 | N/A | ||
| A stack-based buffer overflow vulnerability exists in SKYSEA Client View and SKYMEC IT Manager. If this vulnerability is exploited, an attacker who can log in to a Windows system on which the affected product is installed may be able to execute arbitrary code on another Windows system that has the affected product installed and can receive UDP packets from that system. | ||||
| CVE-2026-68062 | 2026-08-25 | N/A | ||
| SKYSEA Client View and SKYMEC IT Manager contain a path traversal vulnerability. If this vulnerability is exploited, an attacker who can log in to a Windows system on which the affected product is installed may be able to execute arbitrary code on another Windows system that has the affected products installed and can receive UDP packets from that system. Note that this vulnerability is due to an incomplete fix for CVE-2024-41726. | ||||
| CVE-2026-68959 | 2026-08-25 | N/A | ||
| SKYSEA Client View and SKYMEC IT Manager contain a path traversal vulnerability. If this vulnerability is exploited, an attacker who can log in to a Windows system on which the affected product is installed may be able to execute arbitrary code on another Windows system that has the affected products installed and can receive UDP packets from that system. Note that this vulnerability is due to an incomplete fix for CVE-2024-41726. | ||||
| CVE-2026-78322 | 1 Redhat | 1 Enterprise Linux | 2026-08-25 | 6.5 Medium |
| A flaw was found in file-roller. When opening or extracting a malicious 7z or RAR archive containing a file entry with an excessively long path, file-roller's progress-line parsing copies the path into a fixed-size stack buffer using an unbounded string copy. This can trigger a stack buffer overflow and cause file-roller to terminate, resulting in a denial of service. To exploit this flaw, a victim must open or extract the crafted archive using file-roller. | ||||
| CVE-2026-74621 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix sk_buff leak when the header checks reject a packet tcf_ct_handle_fragments() runs its header sanity checks before handing anything to the defragmentation engine: if (family == NFPROTO_IPV4) err = tcf_ct_ipv4_is_fragment(skb, &frag); else err = tcf_ct_ipv6_is_fragment(skb, &frag); if (err || !frag) return err; tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM; tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of them frees or queues the skb, so on that path the caller still owns it. tcf_ct_act() however funnels every non-zero return into the ownership-transfer exit: err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag); if (err) goto out_frag; ... out_frag: if (err != -EINPROGRESS) tcf_action_inc_drop_qstats(&c->common); return TC_ACT_CONSUMED; TC_ACT_CONSUMED means the action took ownership of the skb, so no caller frees it - sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for that verdict. The skb is therefore orphaned: one sk_buff plus its data buffer is leaked per malformed packet, unbounded. Note the drop counter is already incremented for these errors, so the statistics claim a drop that never happens. Three different ownership states reach out_frag: today - the skb may be queued by the defrag engine (-EINPROGRESS), already freed by nf_ct_handle_fragments(), or still owned by us. Tell the caller which of those it is, and free the packet ourselves in the last case, which restores the TC_ACT_SHOT behaviour that predated the Fixes: commit. Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6 header with nexthdr = 0 (hop-by-hop) and nothing after it, on a clsact ingress chain with "action ct". kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet; with this patch it reports none. | ||||
| CVE-2026-74601 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Replace the committing counter check with current_context checks, which are set at the entry of ring_buffer_lock_reserve() and remain valid throughout the entire write operation, providing a reliable indicator of buffer busy state during swap. | ||||
| CVE-2026-74609 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL. | ||||
| CVE-2026-56702 | 2 Adminer, Vrana | 2 Adminer, Adminer | 2026-08-25 | 8.8 High |
| Adminer versions before 5.4.3 contain an unrestricted file upload vulnerability in the AdminerFileUpload plugin that allows authenticated users to upload PHP files by exploiting a permissive default extension allowlist. Attackers can upload PHP webshells to columns ending in _path and execute arbitrary code as the web-server user when uploadPath is web-served. | ||||
| CVE-2026-56703 | 2 Adminer, Vrana | 2 Adminer, Adminer | 2026-08-25 | 7.2 High |
| Adminer before 5.4.3 contains a remote code execution vulnerability in SQLite query handling where VACUUM INTO is not blocked despite ATTACH restrictions. Authenticated attackers can execute VACUUM INTO to write PHP code to arbitrary file paths and execute commands on the server. | ||||
| CVE-2026-78477 | 2 Mvpthemes, Wordpress | 2 Jawn, Wordpress | 2026-08-25 | 9.8 Critical |
| The Jawn theme for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.4.2. This makes it possible for unauthenticated attackers to elevate their privileges to that of an administrator. | ||||
| CVE-2026-66109 | 2026-08-25 | N/A | ||
| A missing authorization vulnerability exists in SKYSEA Client View and SKYMEC IT Manager. If this vulnerability is exploited, an attacker who can log in to the Windows system on which the affected product is installed may execute arbitrary code with SYSTEM privilege. | ||||
| CVE-2026-78656 | 1 Itsourcecode | 1 Sales And Inventory System | 2026-08-25 | 6.3 Medium |
| A vulnerability was found in itsourcecode Sales and Inventory System 1.0. Affected is an unknown function of the file /pages/cust_del.php. The manipulation of the argument ID results in sql injection. The attack can be executed remotely. The exploit has been made public and could be used. | ||||