Export limit exceeded: 370051 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370051 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74842 | 1 Kira-pgr | 1 Promptshopmcp | 2026-08-17 | 6.3 Medium |
| A vulnerability was found in Kira-Pgr PromptShopMCP up to 5bc0cd17358e19a5415d11a531088170d7b81452. Affected is the function download_image of the file server.py of the component Image-Toolkit-MCP-Server. Performing a manipulation of the argument image_url results in server-side request forgery. The attack may be initiated remotely. The exploit has been made public and could be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-74332 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array. | ||||
| CVE-2026-74338 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable BPF_LSM_CGROUP programs at load time The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should not attach any sleepable BPF programs there. Add support to the verifier to explicitly reject attempts to load sleepable BPF programs destined for LSM cgroup attachment. Without this, we get the following splat from a BPF_LSM_CGROUP program marked BPF_F_SLEEPABLE attached to file_open when it calls bpf_get_dentry_xattr(): BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load preempt_count: 0, expected: 0 RCU nest depth: 2, expected: 0 Call Trace: down_read+0x76/0x480 ext4_xattr_get+0x11f/0x700 __vfs_getxattr+0xf0/0x150 bpf_get_dentry_xattr+0xbb/0xf0 bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85 __cgroup_bpf_run_lsm_current+0x326/0x840 bpf_trampoline_6442534646+0x62/0x14d security_file_open+0x34/0x60 do_dentry_open+0x340/0x1260 vfs_open+0x7a/0x440 path_openat+0x1bac/0x30a0 libbpf provides a .s named section variant for every sleepable program type except lsm_cgroup, reflecting that per-cgroup LSM programs are intended to only run in a non-sleepable context. The above splat was obtained by bypassing libbpf by using bpf(2) directly. | ||||
| CVE-2026-74340 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication The firmware-controlled rsp->count field is used as the loop bound for indexing into the flexible rsp->regs[] array without validation against the message length. A count exceeding the actual data causes out-of- bounds reads from the heap-allocated message buffer. Add a check that count fits within the received message. | ||||
| CVE-2026-74344 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root by copying the current rb_root_cached and then replacing the live root with RB_ROOT_CACHED. It then walks the copied root and drops each object contained in the tree. This leaves the rb node state intact while dropping the object. If the object is refcounted and survives the drop, its bpf_rb_node_kern still contains an owner pointer to the freed root and stale rb tree linkage. If a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove() can incorrectly pass the owner check and call rb_erase_cached() on a node whose rb pointers belong to the old tree. Mirror the list draining behavior by marking nodes as busy while the root is being detached, then clear the rb node and release the owner before dropping the containing object. This makes surviving nodes unowned and safe to reject from remove or accept for a later add. | ||||
| CVE-2026-74357 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump The ring content dump in amdgpu_coredump() uses two separate loops over adev->rings[]: the first counts rings with unsignalled fences to size the allocation, and the second copies ring data into the allocated buffers. Both loops use the same condition to skip rings: atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq Because last_seq is an atomic that is updated concurrently by the fence signalling path, additional rings may appear unsignalled in the second loop that were signalled during the first. When this happens, idx exceeds the allocated ring_count and the store to coredump->rings[idx] writes past the end of the kcalloc-ed buffer. This was found during IGT stressful test amd_queue_reset which triggers random GPU resets. The OVERSIZE subtest (CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes a ring timeout and subsequent coredump, which hits the race between the counting and copying loops. The failure is non-deterministic and depends on fence signalling timing during the reset. KASAN log: BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu] Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625 CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35 Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched] Call Trace: <TASK> dump_stack_lvl+0xa5/0x110 print_report+0xd1/0x660 kasan_report+0xf3/0x130 __asan_report_store4_noabort+0x17/0x30 amdgpu_coredump+0x1274/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] drm_sched_job_timedout+0x194/0x5c0 [gpu_sched] process_one_work+0x84b/0x1990 worker_thread+0x6b8/0x11b0 </TASK> Allocated by task 23625: kasan_save_stack+0x39/0x70 __kasan_kmalloc+0xc3/0xd0 __kmalloc_noprof+0x2ec/0x910 amdgpu_coredump+0x5c5/0x12f0 [amdgpu] amdgpu_job_timedout+0xef0/0x16c0 [amdgpu] The buggy address belongs to the object at ffff888106154200 which belongs to the cache kmalloc-rnd-09-96 of size 96 The buggy address is located 16 bytes to the right of allocated 72-byte region [ffff888106154200, ffff888106154248) 72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3 but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes past the allocation. Fix by adding an idx < ring_count guard to the copy loop so it cannot exceed the allocated count even when the fence state changes between the two passes. | ||||
| CVE-2026-74363 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF | ||||
| CVE-2026-74367 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix inconsistent arvif state in vdev_create error paths ath12k_mac_vdev_create() has three error path issues that leave arvif in an inconsistent state: 1. When ath12k_wmi_vdev_create() fails, the function returns directly without clearing arvif->ar, which was already set before the WMI call. Subsequent code checking arvif->ar to determine vdev readiness will see a non-NULL value despite no vdev existing in firmware. 2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the code jumped to err: skipping the DP peer cleanup and vdev rollback, leaving num_created_vdevs, vdev maps and arvif list membership live. 3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to err_vdev_del: skipping the DP peer cleanup. Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead of returning directly, routing both err_peer_del failure paths through err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating the arvif state cleanup at err:. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74390 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs The irdma_copy_user_pgaddrs function loops through all of the umem DMA blocks to populate the PBLEs and will stop when either the last DMA block is reached or palloc->total_cnt is reached. The issue is that the logic for checking palloc->total_cnt would only work for non-zero values. When irdma_setup_pbles is called with lvl==0, it calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means the only way to break out of the loop is to reach the last umem DMA block, which means it could end up going beyond the fixed size of 4 iwmr->pgaddrmem array that is used in the lvl==0 case. In the case of QP/CQ/SRQ rings, the value of lvl is determined by a separate input (for example, req.cq_pages in the case of a CQ). So, we must perform explicit checking to ensure we don't overflow the pgaddrmem array if the user provides a umem that consists of more blocks than their provided req.cq_pages. | ||||
| CVE-2026-74240 | 1 Redhat | 3 Openshift Update Service, Quay, Quay 3 | 2026-08-17 | 5.4 Medium |
| A flaw was found in Red Hat Quay's JWT (JSON Web Token) validation for federated robot accounts and single sign-on (SSO) authentication. Multiple issues related to audience verification and the enforcement of `azp` and `sub` claims were identified. These flaws could allow an attacker with a validly-signed token from the same identity provider to bypass configured security restrictions. This bypass could lead to unauthorized access by circumventing intended audience, subject, or authorized-client limitations. | ||||
| CVE-2026-74241 | 1 Redhat | 3 Openshift Update Service, Quay, Quay 3 | 2026-08-17 | 4.8 Medium |
| A flaw was found in Red Hat Quay's external Lightweight Directory Access Protocol (LDAP) authentication handling. When an LDAP referral is returned during authentication, the system does not properly escape the username input. This allows an attacker to inject LDAP filter metacharacters, enabling user-existence oracle attacks at the referral Directory Name (DN). This could also potentially influence which DN is used for password binding in multi-domain Active Directory environments. | ||||
| CVE-2026-74247 | 1 Redhat | 3 Openshift Update Service, Quay, Quay 3 | 2026-08-17 | 4.2 Medium |
| A flaw was found in Red Hat Quay. A user with FEATURE_BUILD_SUPPORT enabled and repository write access can exploit a Server-Side Request Forgery (SSRF) vulnerability within the build API. This allows the user to provide a malicious URL, causing the Quay builder to make requests to internal network addresses. Such an action could lead to the disclosure of sensitive internal information. | ||||
| CVE-2026-15312 | 2 Fassionstorage, Wordpress | 2 All-in-one Client Management System Plugin, Wordpress | 2026-08-17 | 8.8 High |
| The Propovoice: All-in-One Client Management System plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.7.8. This is due to the `create()` function's REST endpoint failing to validate the user-supplied `role` parameter against an allowlist of permitted WordPress roles and omitting any `promote_users` capability check before passing the sanitized value directly to `WP_User::set_role()`. This makes it possible for authenticated attackers with `ndpv_manager`-level access and above to create a new WordPress user account with the `administrator` role assigned, achieving full vertical privilege escalation. The `ndpv_manager` capability is a sub-administrator CRM team role granted by Propovoice itself, meaning the attack surface extends beyond site administrators to any user the plugin has elevated to a manager position. | ||||
| CVE-2026-12128 | 2 Dotonpaper, Wordpress | 2 Pinpoint Booking System, Wordpress | 2026-08-17 | 5.3 Medium |
| The Pinpoint Booking System – Version 2 plugin for WordPress is vulnerable to Price Manipulation via the `cart_data` parameter in all versions up to, and including, 2.9.9.6.8. This is due to the `dopbsp_woocommerce_add_to_cart` AJAX action being registered via `wp_ajax_nopriv_*` with no authentication, no nonce verification, and no server-side recalculation of pricing — the `update` handler reads `price_total` directly from the attacker-controlled `cart_data` POST parameter and persists it to the database via `$wpdb->insert()` without validating it against the calendar's configured pricing. The `woocommerce_before_calculate_totals` callback subsequently reads the stored attacker-supplied value back from the database and passes it directly to `$product->set_price()` without recomputing from calendar settings. This makes it possible for unauthenticated attackers to override the WooCommerce checkout price of any bookable product tied to a booking calendar to an arbitrary value, effectively enabling the purchase of any such product at a self-chosen price. | ||||
| CVE-2026-15142 | 2 Webcodingplace, Wordpress | 2 Real Estate Manager, Wordpress | 2026-08-17 | 7.5 High |
| The Real Estate Manager Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 12.8.6. This is due to improper capability handling in the allow_attachment_actions() function, which can treat a target user ID as a media attachment ID during user capability checks. This makes it possible for authenticated attackers, with Subscriber-level access and above, to edit an administrator account and escalate their privileges to Administrator when the targeted user ID matches the ID of an existing media attachment. | ||||
| CVE-2026-16142 | 2 Themetechmount, Wordpress | 2 Truebooker-appointment-booking, Wordpress | 2026-08-17 | 9.8 Critical |
| The TrueBooker plugin for WordPress is vulnerable to Account Takeover in all versions up to, and including, 1.2.6. This is due to the add_front_user_update() AJAX handler being registered for unauthenticated users and accepting an arbitrary truebooker_wp_user_id value, which is passed directly to wp_update_user() without verifying authentication or ownership. This makes it possible for unauthenticated attackers to change any WordPress user account email address, including an administrator, by submitting the target user ID and an attacker-controlled email address. An attacker can then use the native WordPress password reset flow to receive the reset link at the attacker-controlled email address and take over the account. | ||||
| CVE-2026-18549 | 1 Fastify | 1 Fastify-multipart | 2026-08-17 | 7.5 High |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 5.3.0 up to but not including 10.1.1, when the busboy fileSize limit truncates a file part, the plugin clears its internal current-file reference while the underlying stream is still open. If the client then aborts the connection before sending the terminating boundary, the abort cleanup finds no stream to destroy, so saveRequestFiles() never settles, the request handler hangs, and the temporary file already written to disk is never cleaned up. An unauthenticated client can repeat this to permanently leak temporary files and suspended handler executions, leading to disk and event-loop exhaustion. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. | ||||
| CVE-2026-19474 | 1 Fastify | 1 Fastify-multipart | 2026-08-17 | 7.5 High |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. | ||||
| CVE-2026-73041 | 2 B3log, Siyuan | 2 Siyuan, Siyuan | 2026-08-17 | 9 Critical |
| SiYuan versions before v3.7.4 fail to validate or escape annotation fields written to disk by the setFileAnnotation endpoint. Attackers can inject malicious markup into annotation fields that execute as script in the PDF renderer with full Node.js access when a user opens an annotated PDF. | ||||
| CVE-2026-73042 | 2 B3log, Siyuan | 2 Siyuan, Siyuan | 2026-08-17 | 9 Critical |
| SiYuan before v3.7.4 fails to properly escape database menu metadata in HTML interpolation, allowing stored values to execute script when users open group, view, or field-edit menus. Attackers can inject markup through field descriptions or names that close containing elements and execute arbitrary code via event handlers, reaching Node built-ins due to Electron's insecure configuration. | ||||