| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795. |
| A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812. |
| A vulnerability in the web interface of Cisco Prime Collaboration Provisioning Software (prior to Release 11.1) could allow an authenticated, remote attacker to delete any file from an affected system. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests and fails to apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request that uses directory traversal techniques to submit a path to a desired file location on an affected system. A successful exploit could allow the attacker to delete any file from the system. Cisco Bug IDs: CSCvc99618. |
| A vulnerability in the web interface of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to access sensitive information on an affected system. The vulnerability exists because the affected software does not sufficiently protect sensitive data when responding to HTTP requests that are sent to the web interface of the software. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web interface of the software on an affected system. A successful exploit could allow the attacker to access sensitive information about the software. The attacker could use this information to conduct additional reconnaissance attacks. Cisco Bug IDs: CSCvc52856. |
| A vulnerability in the web-based user interface of Cisco Prime Infrastructure (PI) and Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker read and write access to information stored in the affected system as well as perform remote code execution. The attacker must have valid user credentials. The vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by convincing the administrator of an affected system to import a crafted XML file with malicious entries which could allow the attacker to read and write files and execute remote code within the application, aka XML Injection. Cisco Prime Infrastructure software releases 1.1 through 3.1.6 are vulnerable. Cisco EPNM software releases 1.2, 2.0, and 2.1 are vulnerable. Cisco Bug IDs: CSCvc23894 CSCvc49561. |
| A vulnerability in the web framework code of Cisco Firepower Management Center could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web interface of an affected system. Affected Products: Cisco Firepower Management Center Software Releases prior to 6.0.0.0. More Information: CSCuy88785. Known Affected Releases: 5.4.1.6. |
| A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995. |
| A vulnerability in Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to gain higher privileges than the account is assigned. The attacker will be granted the privileges of the last user to log in, regardless of whether those privileges are higher or lower than what should have been granted. The attacker cannot gain root-level privileges. The vulnerability is due to a limitation with how Role-Based Access Control (RBAC) grants privileges to remotely authenticated users when login occurs via SSH directly to the local management interface of the APIC. An attacker could exploit this vulnerability by authenticating to the targeted device. The attacker's privilege level will be modified to match that of the last user to log in via SSH. An exploit could allow the attacker to gain elevated privileges and perform CLI commands that should be restricted by the attacker's configured role. Cisco Bug IDs: CSCvc34335. Known Affected Releases: 1.0(1e), 1.0(1h), 1.0(1k), 1.0(1n), 1.0(2j), 1.0(2m), 1.0(3f), 1.0(3i), 1.0(3k), 1.0(3n), 1.0(4h), 1.0(4o); 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1). |
| A vulnerability in the build procedure for certain executable system files installed at boot time on Cisco Application Policy Infrastructure Controller (APIC) devices could allow an authenticated, local attacker to gain root-level privileges. The vulnerability is due to a custom executable system file that was built to use relative search paths for libraries without properly validating the library to be loaded. An attacker could exploit this vulnerability by authenticating to the device and loading a malicious library that can escalate the privilege level. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. The attacker must have valid user credentials to log in to the device. Cisco Bug IDs: CSCvc96087. Known Affected Releases: 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1). |
| A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164. |
| A vulnerability in the management of shell user accounts for Cisco Policy Suite (CPS) Software for CPS appliances could allow an authenticated, local attacker to gain elevated privileges on an affected system. The affected privilege level is not at the root level. The vulnerability is due to incorrect role-based access control (RBAC) for shell user accounts. An attacker could exploit this vulnerability by authenticating to an affected appliance and providing crafted user input via the CLI. A successful exploit could allow the attacker to acquire a higher privilege level than should have been granted. To exploit this vulnerability, the attacker must log in to the appliance with valid credentials. Cisco Bug IDs: CSCve37724. Known Affected Releases: 9.0.0, 9.1.0, 10.0.0, 11.0.0, 12.0.0. |
| A vulnerability in SNMP polling for the Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to discover confidential information about the appliances that should be available only to an administrative user. The vulnerability occurs because the appliances do not protect confidential information at rest in response to Simple Network Management Protocol (SNMP) poll requests. An attacker could exploit this vulnerability by doing a crafted SNMP poll request to the targeted security appliance. An exploit could allow the attacker to discover confidential information that should be restricted, and the attacker could use this information to conduct additional reconnaissance. The attacker must know the configured SNMP community string to exploit this vulnerability. Cisco Bug IDs: CSCve26106, CSCve26202, CSCve26224. Known Affected Releases: 10.0.0-230 (Web Security Appliance), 9.7.2-065 (Email Security Appliance), and 10.1.0-037 (Content Security Management Appliance). |
| A vulnerability in the web interface of the Cisco RV340, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to Cisco WebEx Meetings not sufficiently protecting sensitive data when responding to an HTTP request to the web interface. An attacker could exploit the vulnerability by attempting to use the HTTP protocol and looking at the data in the HTTP responses from the Cisco WebEx Meetings Server. An exploit could allow the attacker to find sensitive information about the application. Cisco Bug IDs: CSCve37988. Known Affected Releases: firmware 1.0.0.30, 1.0.0.33, 1.0.1.9, 1.0.1.16. |
| A vulnerability in the Cisco Unified Intelligence Center web interface could allow an unauthenticated, remote attacker to impact the integrity of the system by executing a Document Object Model (DOM)-based, environment or client-side cross-site scripting (XSS) attack. The vulnerability occurs because user-supplied data in the DOM input is not validated. An attacker could exploit this vulnerability by sending crafted URLs that contain malicious DOM statements to the affected system. A successful exploit could allow the attacker to affect the integrity of the system by manipulating the database. Known Affected Releases 11.0(1)ES10. Cisco Bug IDs: CSCvf18325. |
| A vulnerability in the Session Initiation Protocol (SIP) on the Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the targeted appliance. The vulnerability is due to excessive SIP traffic sent to the device. An attacker could exploit this vulnerability by transmitting large volumes of SIP traffic to the VCS. An exploit could allow the attacker to cause a complete DoS condition on the targeted system. Cisco Bug IDs: CSCve32897. |
| A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830. |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783. |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949. |
| A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069. |
| A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385. |
