| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Directory Traversal vulnerability in the web framework code of the Cisco application-hosting framework (CAF) component of the Cisco IOx application environment could allow an unauthenticated, remote attacker to read any file from the CAF in the virtual instance running on the affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting crafted requests to the CAF web interface. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52302. |
| A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804. |
| A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331. |
| A vulnerability in the IPsec component of Cisco StarOS for Cisco ASR 5000 Series Routers could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from establishing, resulting in a denial of service (DoS) condition. Affected Products: ASR 5000 Series Routers, Virtualized Packet Core (VPC) Software. More Information: CSCvc21129. Known Affected Releases: 21.1.0 21.1.M0.65601 21.1.v0. Known Fixed Releases: 21.2.A0.65754 21.1.b0.66164 21.1.V0.66014 21.1.R0.65759 21.1.M0.65749 21.1.0.66030 21.1.0. |
| A vulnerability in the Plug-and-Play (PnP) subsystem of the Cisco Aironet 1800, 2800, and 3800 Series Access Points running a Lightweight Access Point (AP) or Mobility Express image could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges. The vulnerability is due to insufficient validation of PnP server responses. The PnP feature is only active while the device does not contain a configuration, such as a first time boot or after a factory reset has been issued. An attacker with the ability to respond to PnP configuration requests from the affected device can exploit the vulnerability by returning malicious PnP responses. If a Cisco Application Policy Infrastructure Controller - Enterprise Module (APIC-EM) is available on the network, the attacker would need to exploit the issue in the short window before a valid PnP response was received. If successful, the attacker could gain the ability to execute arbitrary code with root privileges on the underlying operating system of the device. Cisco has confirmed that the only vulnerable software version is 8.3.102.0. Cisco Bug IDs: CSCvb42386. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager could allow an authenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. This vulnerability affects Cisco Unified Communications Manager with a default configuration running an affected software release with the attacker authenticated as the administrative user. More Information: CSCvc83712. Known Affected Releases: 12.0(0.98000.452). Known Fixed Releases: 12.0(0.98000.750) 12.0(0.98000.708) 12.0(0.98000.707) 12.0(0.98000.704) 12.0(0.98000.554) 12.0(0.98000.546) 12.0(0.98000.543) 12.0(0.98000.248) 12.0(0.98000.244) 12.0(0.98000.242). |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices makes it easy for remote attackers to determine the hidden SSID and passphrase for a Home Security Wi-Fi network. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover a CM MAC address by sniffing Wi-Fi traffic and performing simple arithmetic calculations. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) and DPC3941T (firmware version DPC3941_2.5s3_PROD_sey) devices allows remote attackers to access the web UI by establishing a session to the wan0 WAN IPv6 address and then entering unspecified hardcoded credentials. This wan0 interface cannot be accessed from the public Internet. |
| The Comcast firmware on Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows configuration changes via CSRF. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not set the secure flag for cookies in an https session to an administration application, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session. |
| The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows remote attackers to execute arbitrary code via a specific (but unstated) exposed service. NOTE: the scope of this CVE does NOT include the concept of "Unnecessary Services" in general; the scope is only a single service that is unnecessarily exposed, leading to remote code execution. The details of that service might be disclosed at a later date. |
| A vulnerability in the web-based management interface of Cisco NetFlow Generation Appliance could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. More Information: CSCvb15229. Known Affected Releases: 1.0(2). |
| A vulnerability with IPv6 UDP ingress packet processing in Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause an unexpected reload of the device. The vulnerability is due to incomplete IPv6 UDP header validation. An attacker could exploit this vulnerability by sending a crafted IPv6 UDP packet to a specific port on the targeted device. An exploit could allow the attacker to impact the availability of the device as it could unexpectedly reload. This vulnerability affects Cisco Wireless LAN Controller (WLC) running software version 8.2.121.0 or 8.3.102.0. Cisco Bug IDs: CSCva98592. |
| A vulnerability in RADIUS Change of Authorization (CoA) request processing in the Cisco Wireless LAN Controller (WLC) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition by disconnecting a single connection. This vulnerability affects Cisco Wireless LAN Controller running software release 8.3.102.0. More Information: CSCvb01835. Known Fixed Releases: 8.4(1.49) 8.3(111.0) 8.3(108.0) 8.3(104.24) 8.3(102.3). |
| A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to read the contents of arbitrary files. The vulnerability is due to insufficient input validation for a specific CLI command. An attacker could exploit this vulnerability by issuing a crafted command on the CLI. An exploit could allow the attacker unauthorized access to read arbitrary files on the underlying local file system. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to read files from any VDC. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51707, CSCve93961, CSCve93964, CSCve93965, CSCve93968, CSCve93974, CSCve93976. |
| Multiple vulnerabilities in Cisco Data Center Network Manager (DCNM) Software could allow a remote attacker to inject arbitrary values into DCNM configuration parameters, redirect a user to a malicious website, inject malicious content into a DCNM client interface, or conduct a cross-site scripting (XSS) attack against a user of the affected software. Cisco Bug IDs: CSCvf40477, CSCvf63150, CSCvf68218, CSCvf68235, CSCvf68247. |
| Multiple vulnerabilities in Cisco Data Center Network Manager (DCNM) Software could allow a remote attacker to inject arbitrary values into DCNM configuration parameters, redirect a user to a malicious website, inject malicious content into a DCNM client interface, or conduct a cross-site scripting (XSS) attack against a user of the affected software. Cisco Bug IDs: CSCvf40477, CSCvf63150, CSCvf68218, CSCvf68235, CSCvf68247. |
