| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default. |
| A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust memory resources on the affected device, leading to a denial of service (DoS) condition. The vulnerability is due to improper resource management for inbound SSL/TLS connections. An attacker could exploit this vulnerability by establishing multiple SSL/TLS connections with specific conditions to the affected device. A successful exploit could allow the attacker to exhaust the memory on the affected device, causing the device to stop accepting new SSL/TLS connections and resulting in a DoS condition for services on the device that process SSL/TLS traffic. Manual intervention is required to recover an affected device. |
| A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states. |
| A vulnerability in the Transport Layer Security version 1.3 (TLS 1.3) policy with URL category functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured TLS 1.3 policy to block traffic for a specific URL. The vulnerability is due to a logic error with Snort handling of the connection with the TLS 1.3 policy and URL category configuration. An attacker could exploit this vulnerability by sending crafted TLS 1.3 connections to an affected device. A successful exploit could allow the attacker to bypass the TLS 1.3 policy and access URLs that are outside the affected device and normally would be dropped. |
| A vulnerability in the SSL/TLS inspection of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation for certain fields of specific SSL/TLS messages. An attacker could exploit this vulnerability by sending a malformed SSL/TLS message through an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. No manual intervention is needed to recover the device after it has reloaded. |
| A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a large number of TCP packets to a specific port on an affected device. A successful exploit could allow the attacker to exhaust system memory, which could cause the device to reload unexpectedly. No manual intervention is needed to recover the device after it has reloaded. |
| A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload. |
| Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device.
These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition.
Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information.
Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected. |
| A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information.
This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device. |
| Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device.
These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition.
Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information.
Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected. |
| A vulnerability in dynamic access policies (DAP) functionality of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper processing of HostScan data received from the Posture (HostScan) module. An attacker could exploit this vulnerability by sending crafted HostScan data to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU"]
This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. |
| A vulnerability in the interaction of SIP and Snort 3 for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart.
This vulnerability is due to a lack of error-checking when SIP bidirectional flows are being inspected by Snort 3. An attacker could exploit this vulnerability by sending a stream of crafted SIP traffic through an interface on the targeted device. A successful exploit could allow the attacker to trigger a restart of the Snort 3 process, resulting in a denial of service (DoS) condition. |
| Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section. |
| Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the authentication and authorization flows for VPN connections in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish a connection as a different user.
This vulnerability is due to a flaw in the authorization verifications during the VPN authentication flow. An attacker could exploit this vulnerability by sending a crafted packet during a VPN authentication. The attacker must have valid credentials to establish a VPN connection. A successful exploit could allow the attacker to establish a VPN connection with access privileges from a different user. |
| A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to a memory handling error that occurs when GRE traffic is processed. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to cause the device to restart, resulting in a DoS condition.
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM"]
This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. |
| A vulnerability in the management web server of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with high privileges to execute configuration commands on an affected system.
This vulnerability exists because access to HTTPS endpoints is not properly restricted on an affected device. An attacker could exploit this vulnerability by sending specific messages to the affected HTTPS handler. A successful exploit could allow the attacker to perform configuration changes on the affected system, which should be configured and managed only through Cisco Firepower Management Center (FMC) Software. |
| A vulnerability in ICMPv6 processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper processing of ICMPv6 messages. An attacker could exploit this vulnerability by sending crafted ICMPv6 messages to a targeted Cisco ASA or FTD system with IPv6 enabled. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
