| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: reset read_slot when reusing r10bio for discard
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix inconsistent arvif state in vdev_create error paths
ath12k_mac_vdev_create() has three error path issues that leave arvif
in an inconsistent state:
1. When ath12k_wmi_vdev_create() fails, the function returns directly
without clearing arvif->ar, which was already set before the WMI
call. Subsequent code checking arvif->ar to determine vdev readiness
will see a non-NULL value despite no vdev existing in firmware.
2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the
code jumped to err: skipping the DP peer cleanup and vdev rollback,
leaving num_created_vdevs, vdev maps and arvif list membership live.
3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to
err_vdev_del: skipping the DP peer cleanup.
Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead
of returning directly, routing both err_peer_del failure paths through
err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating
the arvif state cleanup at err:.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Handle preemption in BTT lane acquisition
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are also held across arena_write_bytes() calls. That path
reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush().
Some provider flush callbacks can sleep, making a spinlock the wrong
primitive for the lane lifetime.
Replace the spinlock-based recursion model with a dynamically
allocated per-lane mutex array and take the lane lock
unconditionally.
Add might_sleep() to catch any future atomic-context caller.
Found with the ndctl unit test btt-check.sh. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject exclusive maps as inner maps in map-in-map
An exclusive map (created with excl_prog_hash) is bound to a single
program by hash: check_map_prog_compatibility() refuses to load any
program whose digest does not match map->excl_prog_sha. That check
only runs for maps a program references directly, i.e. its used_maps.
A map reached at runtime through a map-of-maps is never in used_maps,
and bpf_map_meta_equal() does not consider excl_prog_sha, so an
exclusive map can be inserted into a non-exclusive outer map and
then looked up and mutated by an unrelated program, bypassing the
exclusivity guarantee.
For the signed loader this defeats the metadata map exclusivity check
added in the signed loader: the cached map->sha[] is validated against
the signed hash while another program on a hostile host rewrites the
frozen map's contents through the outer map. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs
commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning
htab with internal structs") moved inode cleanup from ->free_inode()
into ->destroy_inode() to avoid sleeping in RCU context when calling
bpf_any_put(). However this removed the RCU delay on freeing the
inode itself and the cached symlink body (i_link), both of which
can be accessed by RCU pathwalk (pick_link, may_lookup etc.).
This causes a use-after-free when a concurrent unlinkat() drops the
last inode reference and destroy_inode() frees the inode immediately,
while another task is still walking the path in RCU mode and reads
inode->i_opflags (offset +2) inside current_time() -> is_mgtime().
KASAN reports:
BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313
Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags)
The rules (per Al Viro):
->destroy_inode() called immediately, can sleep, use for blocking
cleanup e.g. bpf_any_put()
->free_inode() called after RCU grace period, use for freeing
inode and anything RCU-accessible e.g. i_link
Fix: split the two concerns properly:
- keep bpf_any_put() in bpf_destroy_inode() since it is blocking
and needs to run promptly
- introduce bpf_free_inode() to handle kfree(i_link) and
free_inode_nonrcu() with proper RCU delay, preventing the UAF |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix FDP fdpcidx bounds check
The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=,
incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). |
| In the Linux kernel, the following vulnerability has been resolved:
configfs_lookup(): don't leave ->s_dentry dangling on failure
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so... |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump
The ring content dump in amdgpu_coredump() uses two separate loops over
adev->rings[]: the first counts rings with unsignalled fences to size
the allocation, and the second copies ring data into the allocated
buffers.
Both loops use the same condition to skip rings:
atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq
Because last_seq is an atomic that is updated concurrently by the fence
signalling path, additional rings may appear unsignalled in the second
loop that were signalled during the first. When this happens, idx
exceeds the allocated ring_count and the store to coredump->rings[idx]
writes past the end of the kcalloc-ed buffer.
This was found during IGT stressful test amd_queue_reset which
triggers random GPU resets. The OVERSIZE subtest
(CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes
a ring timeout and subsequent coredump, which hits the race between
the counting and copying loops. The failure is non-deterministic and
depends on fence signalling timing during the reset.
KASAN log:
BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu]
Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625
CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35
Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched]
Call Trace:
<TASK>
dump_stack_lvl+0xa5/0x110
print_report+0xd1/0x660
kasan_report+0xf3/0x130
__asan_report_store4_noabort+0x17/0x30
amdgpu_coredump+0x1274/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
drm_sched_job_timedout+0x194/0x5c0 [gpu_sched]
process_one_work+0x84b/0x1990
worker_thread+0x6b8/0x11b0
</TASK>
Allocated by task 23625:
kasan_save_stack+0x39/0x70
__kasan_kmalloc+0xc3/0xd0
__kmalloc_noprof+0x2ec/0x910
amdgpu_coredump+0x5c5/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
The buggy address belongs to the object at ffff888106154200
which belongs to the cache kmalloc-rnd-09-96 of size 96
The buggy address is located 16 bytes to the right of
allocated 72-byte region [ffff888106154200, ffff888106154248)
72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3
but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes
past the allocation.
Fix by adding an idx < ring_count guard to the copy loop so it cannot
exceed the allocated count even when the fence state changes between
the two passes. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: fix vhost_get_avail_idx for a non empty ring
vhost_get_avail_idx is supposed to report whether it has updated
vq->avail_idx. Instead, it returns whether all entries have been
consumed, which is usually the same. But not always - in
drivers/vhost/net.c and when mergeable buffers have been enabled, the
driver checks whether the combined entries are big enough to store an
incoming packet. If not, the driver re-enables notifications with
available entries still in the ring. The incorrect return value from
vhost_get_avail_idx propagates through vhost_enable_notify and causes
the host to livelock if the guest is not making progress, as vhost will
immediately disable notifications and retry using the available entries.
This goes back to commit d3bb267bbdcb ("vhost: cache avail index in
vhost_enable_notify()") which changed vhost_enable_notify() to compare
the freshly read avail index against vq->last_avail_idx instead of the
previously cached vq->avail_idx. Commit 7ad472397667 ("vhost: move
smp_rmb() into vhost_get_avail_idx()") then carried over the same
comparison when refactoring vhost_enable_notify() to call the unified
vhost_get_avail_idx().
The obvious fix is to make vhost_get_avail_idx do what the comment
says it does and report whether new entries have been added. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix RB-tree corruption in probe error path
The info->node RB-tree member is zero-initialized via kzalloc. If
a device does not support ATS, the device_rbtree_insert() call is
skipped. If a subsequent probe step fails, the error path jumps to
device_rbtree_remove(), which misinterprets the zeroed node as
a tree root and corrupts the device RB-tree.
Fix this by explicitly initializing the RB-node as empty using
RB_CLEAR_NODE() during initialization and guarding the removal with
RB_EMPTY_NODE(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take mmap_lock in zap_pages()
zap_vma_range() requires the owning mm's mmap_lock to be held.
Taking mmap_read_lock under arena->lock would AB-BA against
arena_vm_close() and arena_map_mmap(), both of which run with
mmap_write_lock held and then acquire arena->lock. Instead drop
arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and
re-resolve the vma via find_vma() since it may have been unmapped or
replaced while waiting.
Track processed vmls with a per-call generation in vml->zap_gen and
serialize zap_pages() callers with a new arena->zap_mutex so
concurrent callers on different uaddr ranges do not mark each other's
vmls processed before the zap is done. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate fast symlink target during inode read
ocfs2_validate_inode_block() already rejects several inconsistent
self-contained dinodes before they are exposed to the rest of the
filesystem. Fast symlinks need the same treatment.
A zero-cluster symlink is treated as a fast symlink and later read through
page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses
strnlen() on the inline payload and then copies len + 1 bytes into the
folio. If a corrupt dinode stores an i_size that does not fit the inline
area or omits the terminating NUL at i_size, that copy reads past the end
of the inode block buffer.
Reject zero-cluster symlink dinodes whose i_size exceeds the inline
fast-symlink capacity or whose inline payload is not NUL-terminated
exactly at i_size when the inode block is validated. This keeps malformed
fast symlinks from reaching the read path.
Validation reproduced this kernel report:
KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0
RIP: 0033:0x7f5c6d859aa7
Read of size 3905
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x19f/0x330 (?:?)
kasan_report+0xe0/0x110 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
__asan_memcpy+0x23/0x60 (?:?)
filemap_read_folio+0x27/0xe0 (?:?)
filemap_read_folio+0x35/0xe0 (?:?)
do_read_cache_folio+0x138/0x230 (?:?)
__page_get_link+0x26/0x110 (?:?)
page_get_link+0x2e/0x70 (?:?)
vfs_readlink+0x15e/0x250 (?:?)
touch_atime+0x4d/0x370 (?:?)
do_readlinkat+0x186/0x200 (?:?)
do_user_addr_fault+0x65a/0x890 (?:?)
__x64_sys_readlink+0x46/0x60 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its
too-short range validation only checks sb->s_blocksize.
On filesystems with a cluster size larger than the block size, a FITRIM
range that is at least one block but shorter than one cluster is accepted
and shifted down to len == 0. The later start + len - 1 and len -= ...
arithmetic then underflows and can drive trimming past the requested
range.
Reject ranges shorter than s_clustersize instead. That preserves the
existing -EINVAL behavior for requests that cannot discard even one
allocation unit and keeps zero-cluster trims out of the group walk. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount
Add a refcount for struct nf_ct_timeout which is used by ct extension to
set the custom ct timeout policy, this tells us that the ct timeout is
being used by a conntrack entry. When the last conntrack entry drops the
refcount on the ct timeout, the ct timeout is released.
Remove the refcount for control plane which controls if the ruleset
refers to the timeout policy. After this update, it is possible to
remove the ct timeout policy from nfnetlink_cttimeout immediately.
This is for simplicity not to handle two refcounts on a single object.
Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just
hold a reference to the nf_ct_timeout object until packet is reinjected,
since this is part of the ct extension, this will be released by the
time the conntrack is freed.
nf_ct_untimeout() is still called to clean up in a best effort basis:
the ct timeout on existing entries gets removed when the ct timeout goes
away, but as long as the iptables ruleset still refers to the ct timeout
through a template, new conntracks may keep attaching it and extend its
lifetime until the rule is removed.
nf_ct_untimeout() is not called anymore from module removal path, this
is unlikely to find timeouts give module refcount is bumped, and the new
refcount already tracks the ct timeout policy use so it is released when
unused. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix endpoint/socket association handling
Disassociating a socket from an endpoint via siw_socket_disassoc() may
release the last reference on that endpoint and free it. Therefore, don't
clear the endpoints socket pointer after calling that function, but
within.
This fixes a:
BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075)
which occurred after processing a malformed MPA request during connection
establishment, causing the new endpoint to be closed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear rb node linkage when freeing bpf_rb_root
bpf_rb_root_free() detaches the root by copying the current rb_root_cached
and then replacing the live root with RB_ROOT_CACHED. It then walks the
copied root and drops each object contained in the tree.
This leaves the rb node state intact while dropping the object. If the
object is refcounted and survives the drop, its bpf_rb_node_kern still
contains an owner pointer to the freed root and stale rb tree linkage. If
a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove()
can incorrectly pass the owner check and call rb_erase_cached() on a node
whose rb pointers belong to the old tree.
Mirror the list draining behavior by marking nodes as busy while the root
is being detached, then clear the rb node and release the owner before
dropping the containing object. This makes surviving nodes unowned and
safe to reject from remove or accept for a later add. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: fix xattr race condition with multiple superblocks
Multiple superblocks with different namespaces can share the same
kernfs_node when kernfs_test_super() finds a matching root but
different namespace. This means multiple inodes from different
superblocks can reference the same kernfs_node->iattr->xattrs
structure.
The VFS layer only holds per-inode locks during xattr operations,
which is insufficient to serialize concurrent xattr modifications on
the shared kernfs_node. This can lead to race conditions in
simple_xattr_set() where the lookup->replace/remove sequence is not
atomic with respect to operations from other superblocks.
Fix this by protecting xattr operations with the existing hashed
kernfs_locks->open_file_mutex[] array, which is already used to
protect per-node open file data. The hashed mutex array provides
scalable per-node serialization (scaled by CPU count, up to 1024 locks
on 32+ CPU systems) with zero memory overhead.
Changes:
- Rename open_file_mutex[] to node_mutex[] to reflect dual purpose
- Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers
- Protect simple_xattr_set() calls in kernfs_xattr_set() and
kernfs_vfs_user_xattr_set() with the hashed mutex
- Update file.c to use new helpers via compatibility wrappers
- Update documentation to explain the extended lock usage |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix heap overflow from oversized firmware HAL response
The firmware response dispatcher copies all synchronous HAL responses
into the 4096-byte hal_buf without validating the response length. A
response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow
with firmware-controlled content.
Add a bounds check on the response length. |
