| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/plane: Move range check for format_count earlier
While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: fix panic when growing a memfd_secret
When one tries to grow an existing memfd_secret with ftruncate, one gets
a panic [1]. For example, doing the following reliably induces the
panic:
fd = memfd_secret();
ftruncate(fd, 10);
ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
strcpy(ptr, "123456789");
munmap(ptr, 10);
ftruncate(fd, 20);
The basic reason for this is, when we grow with ftruncate, we call down
into simple_setattr, and then truncate_inode_pages_range, and eventually
we try to zero part of the memory. The normal truncation code does this
via the direct map (i.e., it calls page_address() and hands that to
memset()).
For memfd_secret though, we specifically don't map our pages via the
direct map (i.e. we call set_direct_map_invalid_noflush() on every
fault). So the address returned by page_address() isn't useful, and
when we try to memset() with it we panic.
This patch avoids the panic by implementing a custom setattr for
memfd_secret, which detects resizes specifically (setting the size for
the first time works just fine, since there are no existing pages to try
to zero), and rejects them with EINVAL.
One could argue growing should be supported, but I think that will
require a significantly more lengthy change. So, I propose a minimal
fix for the benefit of stable kernels, and then perhaps to extend
memfd_secret to support growing in a separate patch.
[1]:
BUG: unable to handle page fault for address: ffffa0a889277028
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060
Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:memset_erms+0x9/0x10
Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8
RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028
RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028
R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0
R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8
FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? zero_user_segments+0x82/0x190
truncate_inode_partial_folio+0xd4/0x2a0
truncate_inode_pages_range+0x380/0x830
truncate_setsize+0x63/0x80
simple_setattr+0x37/0x60
notify_change+0x3d8/0x4d0
do_sys_ftruncate+0x162/0x1d0
__x64_sys_ftruncate+0x1c/0x20
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet
CR2: ffffa0a889277028
[lkp@intel.com: secretmem_iops can be static]
[axelrasmussen@google.com: return EINVAL] |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: unmark inode in use in error path
Unmark inode in use if error encountered. If the in-use flag leakage
occurs in cachefiles_open_file(), Cachefiles will complain "Inode
already in use" when later another cookie with the same index key is
looked up.
If the in-use flag leakage occurs in cachefiles_create_tmpfile(), though
the "Inode already in use" warning won't be triggered, fix the leakage
anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: Ensure eth header is in skb's linear part
After feeding a decapsulated packet to a veth device with act_mirred,
skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(),
which expects at least ETH_HLEN byte of linear data (as
__dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes
unconditionally).
Use pskb_may_pull() to ensure veth_xmit() respects this constraint.
kernel BUG at include/linux/skbuff.h:2328!
RIP: 0010:eth_type_trans+0xcf/0x140
Call Trace:
<IRQ>
__dev_forward_skb2+0xe3/0x160
veth_xmit+0x6e/0x250 [veth]
dev_hard_start_xmit+0xc7/0x200
__dev_queue_xmit+0x47f/0x520
? skb_ensure_writable+0x85/0xa0
? skb_mpls_pop+0x98/0x1c0
tcf_mirred_act+0x442/0x47e [act_mirred]
tcf_action_exec+0x86/0x140
fl_classify+0x1d8/0x1e0 [cls_flower]
? dma_pte_clear_level+0x129/0x1a0
? dma_pte_clear_level+0x129/0x1a0
? prb_fill_curr_block+0x2f/0xc0
? skb_copy_bits+0x11a/0x220
__tcf_classify+0x58/0x110
tcf_classify_ingress+0x6b/0x140
__netif_receive_skb_core.constprop.0+0x47d/0xfd0
? __iommu_dma_unmap_swiotlb+0x44/0x90
__netif_receive_skb_one_core+0x3d/0xa0
netif_receive_skb+0x116/0x170
be_process_rx+0x22f/0x330 [be2net]
be_poll+0x13c/0x370 [be2net]
__napi_poll+0x2a/0x170
net_rx_action+0x22f/0x2f0
__do_softirq+0xca/0x2a8
__irq_exit_rcu+0xc1/0xe0
common_interrupt+0x83/0xa0 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: release correct delalloc amount in direct IO write path
Running generic/406 causes the following WARNING in btrfs_destroy_inode()
which tells there are outstanding extents left.
In btrfs_get_blocks_direct_write(), we reserve a temporary outstanding
extents with btrfs_delalloc_reserve_metadata() (or indirectly from
btrfs_delalloc_reserve_space(()). We then release the outstanding extents
with btrfs_delalloc_release_extents(). However, the "len" can be modified
in the COW case, which releases fewer outstanding extents than expected.
Fix it by calling btrfs_delalloc_release_extents() for the original length.
To reproduce the warning, the filesystem should be 1 GiB. It's
triggering a short-write, due to not being able to allocate a large
extent and instead allocating a smaller one.
WARNING: CPU: 0 PID: 757 at fs/btrfs/inode.c:8848 btrfs_destroy_inode+0x1e6/0x210 [btrfs]
Modules linked in: btrfs blake2b_generic xor lzo_compress
lzo_decompress raid6_pq zstd zstd_decompress zstd_compress xxhash zram
zsmalloc
CPU: 0 PID: 757 Comm: umount Not tainted 5.17.0-rc8+ #101
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014
RIP: 0010:btrfs_destroy_inode+0x1e6/0x210 [btrfs]
RSP: 0018:ffffc9000327bda8 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888100548b78 RCX: 0000000000000000
RDX: 0000000000026900 RSI: 0000000000000000 RDI: ffff888100548b78
RBP: ffff888100548940 R08: 0000000000000000 R09: ffff88810b48aba8
R10: 0000000000000001 R11: ffff8881004eb240 R12: ffff88810b48a800
R13: ffff88810b48ec08 R14: ffff88810b48ed00 R15: ffff888100490c68
FS: 00007f8549ea0b80(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f854a09e733 CR3: 000000010a2e9003 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
destroy_inode+0x33/0x70
dispose_list+0x43/0x60
evict_inodes+0x161/0x1b0
generic_shutdown_super+0x2d/0x110
kill_anon_super+0xf/0x20
btrfs_kill_super+0xd/0x20 [btrfs]
deactivate_locked_super+0x27/0x90
cleanup_mnt+0x12c/0x180
task_work_run+0x54/0x80
exit_to_user_mode_prepare+0x152/0x160
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f854a000fb7 |
| In Ankitects Anki before 25.02.6, crafted sound file references could cause files to be written to arbitrary locations on Windows and Linux (media file pathnames are not necessarily relative to the media folder). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/fpu: Re-add exception handling in load_fpu_state()
With the recent rewrite of the fpu code exception handling for the
lfpc instruction within load_fpu_state() was erroneously removed.
Add it again to prevent that loading invalid floating point register
values cause an unhandled specification exception. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't overmap identity VRAM mapping
Overmapping the identity VRAM mapping is triggering hardware bugs on
certain platforms. Use 2M pages for the last unaligned (to 1G) VRAM
chunk.
v2:
- Always use 2M pages for last chunk (Fei Yang)
- break loop when 2M pages are used
- Add assert for usable_size being 2M aligned
v3:
- Fix checkpatch |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
Set the maximum size of a subrequest that writes to cachefiles to be
MAX_RW_COUNT so that we don't overrun the maximum write we can make to the
backing filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix finding a last resort AG in xfs_filestream_pick_ag
When the main loop in xfs_filestream_pick_ag fails to find a suitable
AG it tries to just pick the online AG. But the loop for that uses
args->pag as loop iterator while the later code expects pag to be
set. Fix this by reusing the max_pag case for this last resort, and
also add a check for impossible case of no AG just to make sure that
the uninitialized pag doesn't even escape in theory. |
| In the Linux kernel, the following vulnerability has been resolved:
media: av7110: fix a spectre vulnerability
As warned by smatch:
drivers/staging/media/av7110/av7110_ca.c:270 dvb_ca_ioctl() warn: potential spectre issue 'av7110->ci_slot' [w] (local cap)
There is a spectre-related vulnerability at the code. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()
Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.
All of the tegra194 endpoint SoCs supported as of now depend on the refclk
from the host for keeping the controller operational. Due to this
limitation, any access to the hardware registers in the absence of refclk
will result in a whole endpoint crash. Unfortunately, most of the
controller cleanups require accessing the hardware registers (like eDMA
cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup
functions can cause the crash in the endpoint SoC once host asserts PERST#.
One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host.
Thus, fix this crash by moving the controller cleanups to the start of
the pex_ep_event_pex_rst_deassert() function. This function is called
whenever the host has deasserted PERST# and it is guaranteed that the
refclk would be active at this point. So at the start of this function
(after enabling resources) the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert()
Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of qcom_pcie_perst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.
All of the Qcom endpoint SoCs supported as of now depend on the refclk from
the host for keeping the controller operational. Due to this limitation,
any access to the hardware registers in the absence of refclk will result
in a whole endpoint crash. Unfortunately, most of the controller cleanups
require accessing the hardware registers (like eDMA cleanup performed in
dw_pcie_ep_cleanup(), powering down MHI EPF etc...). So these cleanup
functions are currently causing the crash in the endpoint SoC once host
asserts PERST#.
One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host (as I was told by the Qcom engineers).
Thus, fix this crash by moving the controller cleanups to the start of
the qcom_pcie_perst_deassert() function. qcom_pcie_perst_deassert() is
called whenever the host has deasserted PERST# and it is guaranteed that
the refclk would be active at this point. So at the start of this function
(after enabling resources), the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix bounds checker error in nl80211_parse_sched_scan
The channels array in the cfg80211_scan_request has a __counted_by
attribute attached to it, which points to the n_channels variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of allocated memory as the initial value for
n_channels. It is updated with the actual number of added elements after
the array is filled. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: fix false positive warning in extack during dumps
Commit under fixes extended extack reporting to dumps.
It works under normal conditions, because extack errors are
usually reported during ->start() or the first ->dump(),
it's quite rare that the dump starts okay but fails later.
If the dump does fail later, however, the input skb will
already have the initiating message pulled, so checking
if bad attr falls within skb->data will fail.
Switch the check to using nlh, which is always valid.
syzbot found a way to hit that scenario by filling up
the receive queue. In this case we initiate a dump
but don't call ->dump() until there is read space for
an skb.
WARNING: CPU: 1 PID: 5845 at net/netlink/af_netlink.c:2210 netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
RIP: 0010:netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
Call Trace:
<TASK>
netlink_dump_done+0x513/0x970 net/netlink/af_netlink.c:2250
netlink_dump+0x91f/0xe10 net/netlink/af_netlink.c:2351
netlink_recvmsg+0x6bb/0x11d0 net/netlink/af_netlink.c:1983
sock_recvmsg_nosec net/socket.c:1051 [inline]
sock_recvmsg+0x22f/0x280 net/socket.c:1073
__sys_recvfrom+0x246/0x3d0 net/socket.c:2267
__do_sys_recvfrom net/socket.c:2285 [inline]
__se_sys_recvfrom net/socket.c:2281 [inline]
__x64_sys_recvfrom+0xde/0x100 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff37dd17a79 |
| In the Linux kernel, the following vulnerability has been resolved:
net/l2tp: fix warning in l2tp_exit_net found by syzbot
In l2tp's net exit handler, we check that an IDR is empty before
destroying it:
WARN_ON_ONCE(!idr_is_empty(&pn->l2tp_tunnel_idr));
idr_destroy(&pn->l2tp_tunnel_idr);
By forcing memory allocation failures in idr_alloc_32, syzbot is able
to provoke a condition where idr_is_empty returns false despite there
being no items in the IDR. This turns out to be because the radix tree
of the IDR contains only internal radix-tree nodes and it is this that
causes idr_is_empty to return false. The internal nodes are cleaned by
idr_destroy.
Use idr_for_each to check that the IDR is empty instead of
idr_is_empty to avoid the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/stacktrace: Use break instead of return statement
arch_stack_walk_user_common() contains a return statement instead of a
break statement in case store_ip() fails while trying to store a callchain
entry of a user space process.
This may lead to a missing pagefault_enable() call.
If this happens any subsequent page fault of the process won't be resolved
by the page fault handler and this in turn will lead to the process being
killed.
Use a break instead of a return statement to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu/nocb: Fix missed RCU barrier on deoffloading
Currently, running rcutorture test with torture_type=rcu fwd_progress=8
n_barrier_cbs=8 nocbs_nthreads=8 nocbs_toggle=100 onoff_interval=60
test_boost=2, will trigger the following warning:
WARNING: CPU: 19 PID: 100 at kernel/rcu/tree_nocb.h:1061 rcu_nocb_rdp_deoffload+0x292/0x2a0
RIP: 0010:rcu_nocb_rdp_deoffload+0x292/0x2a0
Call Trace:
<TASK>
? __warn+0x7e/0x120
? rcu_nocb_rdp_deoffload+0x292/0x2a0
? report_bug+0x18e/0x1a0
? handle_bug+0x3d/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? rcu_nocb_rdp_deoffload+0x292/0x2a0
rcu_nocb_cpu_deoffload+0x70/0xa0
rcu_nocb_toggle+0x136/0x1c0
? __pfx_rcu_nocb_toggle+0x10/0x10
kthread+0xd1/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
CPU0 CPU2 CPU3
//rcu_nocb_toggle //nocb_cb_wait //rcutorture
// deoffload CPU1 // process CPU1's rdp
rcu_barrier()
rcu_segcblist_entrain()
rcu_segcblist_add_len(1);
// len == 2
// enqueue barrier
// callback to CPU1's
// rdp->cblist
rcu_do_batch()
// invoke CPU1's rdp->cblist
// callback
rcu_barrier_callback()
rcu_barrier()
mutex_lock(&rcu_state.barrier_mutex);
// still see len == 2
// enqueue barrier callback
// to CPU1's rdp->cblist
rcu_segcblist_entrain()
rcu_segcblist_add_len(1);
// len == 3
// decrement len
rcu_segcblist_add_len(-2);
kthread_parkme()
// CPU1's rdp->cblist len == 1
// Warn because there is
// still a pending barrier
// trigger warning
WARN_ON_ONCE(rcu_segcblist_n_cbs(&rdp->cblist));
cpus_read_unlock();
// wait CPU1 to comes online and
// invoke barrier callback on
// CPU1 rdp's->cblist
wait_for_completion(&rcu_state.barrier_completion);
// deoffload CPU4
cpus_read_lock()
rcu_barrier()
mutex_lock(&rcu_state.barrier_mutex);
// block on barrier_mutex
// wait rcu_barrier() on
// CPU3 to unlock barrier_mutex
// but CPU3 unlock barrier_mutex
// need to wait CPU1 comes online
// when CPU1 going online will block on cpus_write_lock
The above scenario will not only trigger a WARN_ON_ONCE(), but also
trigger a deadlock.
Thanks to nocb locking, a second racing rcu_barrier() on an offline CPU
will either observe the decremented callback counter down to 0 and spare
the callback enqueue, or rcuo will observe the new callback and keep
rdp->nocb_cb_sleep to false.
Therefore check rdp->nocb_cb_sleep before parking to make sure no
further rcu_barrier() is waiting on the rdp. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Skip Rx TID cleanup for self peer
During peer create, dp setup for the peer is done where Rx TID is
updated for all the TIDs. Peer object for self peer will not go through
dp setup.
When core halts, dp cleanup is done for all the peers. While cleanup,
rx_tid::ab is accessed which causes below stack trace for self peer.
WARNING: CPU: 6 PID: 12297 at drivers/net/wireless/ath/ath12k/dp_rx.c:851
Call Trace:
__warn+0x7b/0x1a0
ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k]
report_bug+0x10b/0x200
handle_bug+0x3f/0x70
exc_invalid_op+0x13/0x60
asm_exc_invalid_op+0x16/0x20
ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k]
ath12k_dp_rx_frags_cleanup+0xca/0xe0 [ath12k]
ath12k_dp_rx_peer_tid_cleanup+0x39/0xa0 [ath12k]
ath12k_mac_peer_cleanup_all+0x61/0x100 [ath12k]
ath12k_core_halt+0x3b/0x100 [ath12k]
ath12k_core_reset+0x494/0x4c0 [ath12k]
sta object in peer will be updated when remote peer is created. Hence
use peer::sta to detect the self peer and skip the cleanup.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
