| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: always resume_all after suspend_all
Need to restore any good queues even if the suspend_all
failed for some. Always run remove_queue as that will
schedule a GPU reset is removing the queue fails.
v2: move resume_all after remove |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate DRAW_PRIMITIVES header size before division
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject undersized headers up front. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: reject firmware sections with oversized data
In panthor_fw_load_section_entry(), the data size to copy is calculated
without validating it against the allocated section_size:
section->data.size = hdr.data.end - hdr.data.start;
If a crafted firmware sets data.size larger than the allocated memory,
this could cause a heap buffer overflow in panthor_fw_init_section_mem()
memcpy(section->mem->kmap, section->data.buf, section->data.size);
Additionally, if the section->data.size exceeds the BO size, could this
memset underflow the size calculation, leading to a massive out-of-bounds
zeroing of kernel memory?
memset(section->mem->kmap + section->data.size, 0,
panthor_kernel_bo_size(section->mem) - section->data.size);
Reject section entries whose initial data is larger than the section size. |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| A vulnerability was detected in opensourcepos Open Source Point of Sale up to 3.4.2. This affects the function Login::index of the file app/Config/Filters.php of the component Login Endpoint. The manipulation results in improper restriction of excessive authentication attempts. The attack may be launched remotely. The attack requires a high level of complexity. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: reset read_slot when reusing r10bio for discard
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock waiting for ticket during data relocation
When performing data relocation on a zoned filesystem, BTRFS can deadlock
in handle_reserve_tickets(). The relocation process is waiting on a space
reservation ticket that can never be fulfilled, because the relocation
itself is the operation responsible for freeing up that space.
Fix this by introducing a new flush state,
BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk
allocation during zoned relocation. Like
BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses
priority_reclaim_data_space() instead of the normal flushing path, which
avoids re-entering the relocation code and breaking the deadlock cycle.
In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the
inode belongs to a data relocation root on a zoned filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix heap overflow from oversized firmware HAL response
The firmware response dispatcher copies all synchronous HAL responses
into the 4096-byte hal_buf without validating the response length. A
response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow
with firmware-controlled content.
Add a bounds check on the response length. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take mmap_lock in zap_pages()
zap_vma_range() requires the owning mm's mmap_lock to be held.
Taking mmap_read_lock under arena->lock would AB-BA against
arena_vm_close() and arena_map_mmap(), both of which run with
mmap_write_lock held and then acquire arena->lock. Instead drop
arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and
re-resolve the vma via find_vma() since it may have been unmapped or
replaced while waiting.
Track processed vmls with a per-call generation in vml->zap_gen and
serialize zap_pages() callers with a new arena->zap_mutex so
concurrent callers on different uaddr ranges do not mark each other's
vmls processed before the zap is done. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will
be executed even though codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a wild
memory access when qfq has codel as a child:
[ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full)
[ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216
[ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000
[ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000
[ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024
[ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000
[ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578
[ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000
[ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0
[ 36.344359][ T370] PKRU: 55555554
[ 36.344481][ T370] Call Trace:
...
[ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057)
[ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: fix supplied_from allocations
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: xilinx: use FIFO occupancy register to determine buffer size
The method the driver uses to determine the size of the FIFO has a
problem. What it currently does is this:
It stops the SPI hardware and writes to the TX FIFO register until TX
FIFO FULL asserts in the status register. But the hardware does not only
have the FIFO, it also has a shift register which can hold a byte. This
can be seen, when writing a byte to the FIFO (while the SPI hardware is
stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size
of 16 for example, the current method returns a 17.
This is a problem, at least when using the driver in irq mode. The same
size determined for the TX FIFO is also assumed for the RX FIFO. When a
SPI transaction wants to write the amount of the FIFO size or more
bytes, the following happens, for example with 16 bytes FIFO size:
The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and
starts the SPI hardware and goes sleep.
The hardware then shifts out 17 bytes (FIFO + shift register) and
simultaneously reads bytes into the RX FIFO, but it only has 16 places,
so it looses one byte. Then TX FIFO empty asserts, wakes the driver
again, which has a fast path and reads 16 bytes from the RX FIFO, but
before reading the last 17th byte (which is lost) it does this:
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
xilinx_spi_rx(xspi);
rx_words--;
}
It reads the status register and checks if the RX FIFO is not empty.
But it is empty in our case. So this check spins in a while loop
forever locking the driver.
This patch fixes the logic to determine the FIFO size. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Check PCM and DAI name strings before use
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: hdac_hdmi: Validate written enum value
hdac_hdmi_set_pin_port_mux() uses the written enum value to index the
texts array before calling snd_soc_dapm_put_enum_double(), which validates
that the value is within the enum item range.
An out-of-range value can therefore make the driver read past the texts
array before the helper rejects the write. Move the lookup after the helper
has accepted the value. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling
ams_event_to_channel() may return a pointer past the end of
dev->channels when no matching scan_index is found. This can lead
to invalid memory access in ams_handle_event().
Add a bounds check in ams_event_to_channel() and return NULL when
no channel is found. Also guard the caller to safely handle this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/qat: fix f_pos race in qat_vf_resume_write()
qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but
copies into the migration-state buffer after taking the lock and
re-reading the shared file position.
Two concurrent writers could therefore pass the bounds check with the
old offset, then have the second writer copy after the first advanced
f_pos, writing past the end of the migration-state buffer.
Take migf->lock before doing the boundary checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler
Look up the IRQ index in oct_hw->irqs instead of assuming
irq - irqs[0]. This supports non-contiguous IRQ numbers and
avoids incorrect ring indexing when irqs[0] is not the base. |
