| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. Startinf in version 5.0.1 and prior to versions 5.11.3 and 6.1.1, a maliciously modified message can be passed to either `openpgp.verify` or `openpgp.decrypt`, causing these functions to return a valid signature verification result while returning data that was not actually signed. This flaw allows signature verifications of inline (non-detached) signed messages (using `openpgp.verify`) and signed-and-encrypted messages (using `openpgp.decrypt` with `verificationKeys`) to be spoofed, since both functions return extracted data that may not match the data that was originally signed. Detached signature verifications are not affected, as no signed data is returned in that case. In order to spoof a message, the attacker needs a single valid message signature (inline or detached) as well as the plaintext data that was legitimately signed, and can then construct an inline-signed message or signed-and-encrypted message with any data of the attacker's choice, which will appear as legitimately signed by affected versions of OpenPGP.js. In other words, any inline-signed message can be modified to return any other data (while still indicating that the signature was valid), and the same is true for signed+encrypted messages if the attacker can obtain a valid signature and encrypt a new message (of the attacker's choice) together with that signature. The issue has been patched in versions 5.11.3 and 6.1.1. Some workarounds are available. When verifying inline-signed messages, extract the message and signature(s) from the message returned by `openpgp.readMessage`, and verify the(/each) signature as a detached signature by passing the signature and a new message containing only the data (created using `openpgp.createMessage`) to `openpgp.verify`. When decrypting and verifying signed+encrypted messages, decrypt and verify the message in two steps, by first calling `openpgp.decrypt` without `verificationKeys`, and then passing the returned signature(s) and a new message containing the decrypted data (created using `openpgp.createMessage`) to `openpgp.verify`. |
| Multer is a node.js middleware for handling `multipart/form-data`. Versions prior to 2.0.0 are vulnerable to a resource exhaustion and memory leak issue due to improper stream handling. When the HTTP request stream emits an error, the internal `busboy` stream is not closed, violating Node.js stream safety guidance. This leads to unclosed streams accumulating over time, consuming memory and file descriptors. Under sustained or repeated failure conditions, this can result in denial of service, requiring manual server restarts to recover. All users of Multer handling file uploads are potentially impacted. Users should upgrade to 2.0.0 to receive a patch. No known workarounds are available. |
| PowSyBl (Power System Blocks) is a framework to build power system oriented software. In com.powsybl:powsybl-iidm-criteria versions 6.3.0 to before 6.7.2 and com.powsybl:powsybl-contingency-api versions 5.0.0 to before 6.3.0, there is a a potential polynomial Regular Expression Denial of Service (ReDoS) vulnerability in the RegexCriterion class. This class compiles and evaluates an unvalidated, user-supplied regular expression against the identifier of an Identifiable object via Pattern.compile(regex).matcher(id).find(). If successfully exploited, a malicious actor can cause significant CPU exhaustion through repeated or recursive filter(...) calls — especially if performed over large network models or filtering operations. This issue has been patched in com.powsybl:powsybl-iidm-criteria 6.7.2. |
| CodiMD through 2.5.4 has a CSP-based protection mechanism against XSS through uploaded SVG documents containing JavaScript, but it can be bypassed in certain cases of different-origin file storage, such as AWS S3. NOTE: it can be considered a user error if AWS is employed for hosting untrusted JavaScript content, but the selected architecture within AWS does not have components that are able to insert Content-Security-Policy headers. |
| openmrs-module-fhir2 provides the FHIR REST API and related services for OpenMRS, an open medical records system. In versions of the FHIR2 module prior to 2.5.0, privileges were not always correctly checked, which means that unauthorized users may have been able to add or edit data they were not supposed to be able to. All implementers should update to FHIR2 2.5.0 or newer as soon as is feasible to receive a patch. |
| WilderForge is a Wildermyth coremodding API. A critical vulnerability has been identified in multiple projects across the WilderForge organization. The issue arises from unsafe usage of `${{ github.event.review.body }}` and other user controlled variables directly inside shell script contexts in GitHub Actions workflows. This introduces a code injection vulnerability: a malicious actor submitting a crafted pull request review containing shell metacharacters or commands could execute arbitrary shell code on the GitHub Actions runner. This can lead to arbitrary command execution with the permissions of the workflow, potentially compromising CI infrastructure, secrets, and build outputs. Developers who maintain or contribute to the repos WilderForge/WilderForge, WilderForge/ExampleMod, WilderForge/WilderWorkspace, WilderForge/WildermythGameProvider, WilderForge/AutoSplitter, WilderForge/SpASM, WilderForge/thrixlvault, WilderForge/MassHash, and/or WilderForge/DLC_Disabler; as well as users who fork any of the above repositories and reuse affected GitHub Actions workflows, are affected. End users of any the above software and users who only install pre-built releases or artifacts are not affected. This vulnerability does not impact runtime behavior of the software or compiled outputs unless those outputs were produced during exploitation of this vulnerability. A current workaround is to disable GitHub Actions in affected repositories, or remove the affected workflows. |
| Laravel Translation Manager is a package to manage Laravel translation files. Prior to version 0.6.8, the application is vulnerable to Cross-Site Scripting (XSS) attacks due to incorrect input validation and sanitization of user-input data. An attacker can inject arbitrary HTML code, including JavaScript scripts, into the page processed by the user's browser, allowing them to steal sensitive data, hijack user sessions, or conduct other malicious activities. Only authenticated users with access to the translation manager are impacted. The issue is fixed in version 0.6.8. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump
Do not block PCI config accesses through pci_cfg_access_lock() when
executing the s390 variant of PCI error recovery: Acquire just
device_lock() instead of pci_dev_lock() as powerpc's EEH and
generig PCI AER processing do.
During error recovery testing a pair of tasks was reported to be hung:
mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working
INFO: task kmcheck:72 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<000000065256f572>] schedule_preempt_disabled+0x22/0x30
[<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8
[<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core]
[<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core]
[<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398
[<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0
INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds.
Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000
Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
[<000000065256f030>] __schedule+0x2a0/0x590
[<000000065256f356>] schedule+0x36/0xe0
[<0000000652172e28>] pci_wait_cfg+0x80/0xe8
[<0000000652172f94>] pci_cfg_access_lock+0x74/0x88
[<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core]
[<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core]
[<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core]
[<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168
[<0000000652513212>] devlink_health_report+0x19a/0x230
[<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]
No kernel log of the exact same error with an upstream kernel is
available - but the very same deadlock situation can be constructed there,
too:
- task: kmcheck
mlx5_unload_one() tries to acquire devlink lock while the PCI error
recovery code has set pdev->block_cfg_access by way of
pci_cfg_access_lock()
- task: kworker
mlx5_crdump_collect() tries to set block_cfg_access through
pci_cfg_access_lock() while devlink_health_report() had acquired
the devlink lock.
A similar deadlock situation can be reproduced by requesting a
crdump with
> devlink health dump show pci/<BDF> reporter fw_fatal
while PCI error recovery is executed on the same <BDF> physical function
by mlx5_core's pci_error_handlers. On s390 this can be injected with
> zpcictl --reset-fw <BDF>
Tests with this patch failed to reproduce that second deadlock situation,
the devlink command is rejected with "kernel answers: Permission denied" -
and we get a kernel log message of:
mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5
because the config read of VSC_SEMAPHORE is rejected by the underlying
hardware.
Two prior attempts to address this issue have been discussed and
ultimately rejected [see link], with the primary argument that s390's
implementation of PCI error recovery is imposing restrictions that
neither powerpc's EEH nor PCI AER handling need. Tests show that PCI
error recovery on s390 is running to completion even without blocking
access to PCI config space. |
| Akamai CloudTest before 60 2025.06.02 (12988) allows file inclusion via XML External Entity (XXE) injection. |
| Missing Authorization in Lablup's BackendAI allows attackers to takeover all active sessions; Accessing, stealing, or altering any data accessible in the session. This vulnerability exists in all current versions of BackendAI. |
| Missing Authentication in the registration feature of Lablup's BackendAI allows arbitrary users to create user accounts that can access private data even when registration is disabled. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as problematic, has been found in fossasia open-event-server 1.19.1. This issue affects the function send_email_change_user_email of the file /fossasia/open-event-server/blob/development/app/api/helpers/mail.py of the component Mail Verification Handler. The manipulation leads to reliance on obfuscation or encryption of security-relevant inputs without integrity checking. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In BootROM, there is a missing size check for RSA keys in Certificate Type 0 validation. This could lead to memory buffer overflow without requiring additional execution privileges. |
| The password reset mechanism for the Pivot client application is weak, and it may allow an attacker to take over the account. |
| Inside Track / Entropy Derby is a research-grade horse-racing betting engine. Prior to commit 2d38d2f, the VDF-based timelock encryption system fails to enforce sequential delay against the betting operator. Bettors pre-compute the entire Wesolowski VDF and include vdfOutputHex in their encrypted bet ticket, allowing the house to decrypt immediately using fast proof verification instead of expensive VDF evaluation. This issue has been patched via commit 2d38d2f. |
| Lara Translate MCP Server is a Model Context Protocol (MCP) Server for Lara Translate API. Versions 0.0.11 and below contain a command injection vulnerability which exists in the @translated/lara-mcp MCP Server. The vulnerability is caused by the unsanitized use of input parameters within a call to child_process.exec, enabling an attacker to inject arbitrary system commands. Successful exploitation can lead to remote code execution under the server process's privileges. The server constructs and executes shell commands using unvalidated user input directly within command-line strings. This introduces the possibility of shell metacharacter injection (|, >, &&, etc.). This vulnerability is fixed in version 0.0.12. |
| A path traversal vulnerability has been reported to affect several product versions. If a local attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data.
We have already fixed the vulnerability in the following versions:
Qfinder Pro Mac 7.13.0 and later
Qsync for Mac 5.1.5 and later
QVPN Device Client for Mac 2.2.8 and later |
| A vulnerability was found in propanetank Roommate-Bill-Tracking up to 288437f658fc9ee7d4b92a9da12557024d8bc55c. It has been declared as critical. This vulnerability affects unknown code of the file /includes/login.php. The manipulation of the argument Username leads to sql injection. The attack can be initiated remotely. The name of the patch is b32bb1b940f82d38fb9310cd66ebe349e20a1d0a. It is recommended to apply a patch to fix this issue. |
| AT_NA2000 from Nanda Automation Technology vendor has a denial-of-service vulnerability. For the processing of TCP RST packets, PLC AT_NA2000 has a wide acceptable range of sequence numbers. It does not require the sequence number to exactly match the next expected sequence value, just to be within the current receive window, which violates RFC5961. This flaw allows attackers to send multiple random TCP RST packets to hit the acceptable range of sequence numbers, thereby interrupting normal connections and causing a denial-of-service attack. |
