| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in the Intel(R) Server Board S2600ST Family BIOS and Firmware Update software all versions may allow a privileged user to potentially enable escalation of privilege via local access. |
| Improper input validation in some Intel(R) Neural Compressor software before version v3.0 may allow an authenticated user to potentially enable escalation of privilege via adjacent access. |
| Incorrect execution-assigned permissions in some Intel(R) Advanced Link Analyzer Standard Edition software installer before version 23.1.1 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Protection mechanism failure in the SPP for some Intel(R) Xeon(R) processor family (E-Core) may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Out-of-bounds write in some Intel(R) Graphics Drivers may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper neutralization of special elements used in an SQL command ('SQL Injection') in some Intel(R) Neural Compressor software before version v3.0 may allow an authenticated user to potentially enable escalation of privilege via adjacent access. |
| In the Linux kernel, the following vulnerability has been resolved:
media: usb: siano: Fix use after free bugs caused by do_submit_urb
There are UAF bugs caused by do_submit_urb(). One of the KASan reports
is shown below:
[ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890
[ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49
[ 36.408316]
[ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8
[ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584
[ 36.416157] Workqueue: 0x0 (events)
[ 36.417654] Call Trace:
[ 36.418546] <TASK>
[ 36.419320] dump_stack_lvl+0x96/0xd0
[ 36.420522] print_address_description+0x75/0x350
[ 36.421992] print_report+0x11b/0x250
[ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0
[ 36.424806] ? __virt_addr_valid+0xcf/0x170
[ 36.426069] ? worker_thread+0x4a2/0x890
[ 36.427355] kasan_report+0x131/0x160
[ 36.428556] ? worker_thread+0x4a2/0x890
[ 36.430053] worker_thread+0x4a2/0x890
[ 36.431297] ? worker_clr_flags+0x90/0x90
[ 36.432479] kthread+0x166/0x190
[ 36.433493] ? kthread_blkcg+0x50/0x50
[ 36.434669] ret_from_fork+0x22/0x30
[ 36.435923] </TASK>
[ 36.436684]
[ 36.437215] Allocated by task 24:
[ 36.438289] kasan_set_track+0x50/0x80
[ 36.439436] __kasan_kmalloc+0x89/0xa0
[ 36.440566] smsusb_probe+0x374/0xc90
[ 36.441920] usb_probe_interface+0x2d1/0x4c0
[ 36.443253] really_probe+0x1d5/0x580
[ 36.444539] __driver_probe_device+0xe3/0x130
[ 36.446085] driver_probe_device+0x49/0x220
[ 36.447423] __device_attach_driver+0x19e/0x1b0
[ 36.448931] bus_for_each_drv+0xcb/0x110
[ 36.450217] __device_attach+0x132/0x1f0
[ 36.451470] bus_probe_device+0x59/0xf0
[ 36.452563] device_add+0x4ec/0x7b0
[ 36.453830] usb_set_configuration+0xc63/0xe10
[ 36.455230] usb_generic_driver_probe+0x3b/0x80
[ 36.456166] printk: console [ttyGS0] disabled
[ 36.456569] usb_probe_device+0x90/0x110
[ 36.459523] really_probe+0x1d5/0x580
[ 36.461027] __driver_probe_device+0xe3/0x130
[ 36.462465] driver_probe_device+0x49/0x220
[ 36.463847] __device_attach_driver+0x19e/0x1b0
[ 36.465229] bus_for_each_drv+0xcb/0x110
[ 36.466466] __device_attach+0x132/0x1f0
[ 36.467799] bus_probe_device+0x59/0xf0
[ 36.469010] device_add+0x4ec/0x7b0
[ 36.470125] usb_new_device+0x863/0xa00
[ 36.471374] hub_event+0x18c7/0x2220
[ 36.472746] process_one_work+0x34c/0x5b0
[ 36.474041] worker_thread+0x4b7/0x890
[ 36.475216] kthread+0x166/0x190
[ 36.476267] ret_from_fork+0x22/0x30
[ 36.477447]
[ 36.478160] Freed by task 24:
[ 36.479239] kasan_set_track+0x50/0x80
[ 36.480512] kasan_save_free_info+0x2b/0x40
[ 36.481808] ____kasan_slab_free+0x122/0x1a0
[ 36.483173] __kmem_cache_free+0xc4/0x200
[ 36.484563] smsusb_term_device+0xcd/0xf0
[ 36.485896] smsusb_probe+0xc85/0xc90
[ 36.486976] usb_probe_interface+0x2d1/0x4c0
[ 36.488303] really_probe+0x1d5/0x580
[ 36.489498] __driver_probe_device+0xe3/0x130
[ 36.491140] driver_probe_device+0x49/0x220
[ 36.492475] __device_attach_driver+0x19e/0x1b0
[ 36.493988] bus_for_each_drv+0xcb/0x110
[ 36.495171] __device_attach+0x132/0x1f0
[ 36.496617] bus_probe_device+0x59/0xf0
[ 36.497875] device_add+0x4ec/0x7b0
[ 36.498972] usb_set_configuration+0xc63/0xe10
[ 36.500264] usb_generic_driver_probe+0x3b/0x80
[ 36.501740] usb_probe_device+0x90/0x110
[ 36.503084] really_probe+0x1d5/0x580
[ 36.504241] __driver_probe_device+0xe3/0x130
[ 36.505548] driver_probe_device+0x49/0x220
[ 36.506766] __device_attach_driver+0x19e/0x1b0
[ 36.508368] bus_for_each_drv+0xcb/0x110
[ 36.509646] __device_attach+0x132/0x1f0
[ 36.510911] bus_probe_device+0x59/0xf0
[ 36.512103] device_add+0x4ec/0x7b0
[ 36.513215] usb_new_device+0x863/0xa00
[ 36.514736] hub_event+0x18c7/0x2220
[ 36.516130] process_one_work+
---truncated--- |
| Improper neutralization of special elements used in SQL command in some Intel(R) Neural Compressor software before version v3.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Use after free in the UEFI firmware of some Intel(R) Server M20NTP BIOS may allow a privileged user to potentially enable escalation of privilege via local access. |
| Rustix is a set of safe Rust bindings to POSIX-ish APIs. When using `rustix::fs::Dir` using the `linux_raw` backend, it's possible for the iterator to "get stuck" when an IO error is encountered. Combined with a memory over-allocation issue in `rustix::fs::Dir::read_more`, this can cause quick and unbounded memory explosion (gigabytes in a few seconds if used on a hot path) and eventually lead to an OOM crash of the application. The symptoms were initially discovered in https://github.com/imsnif/bandwhich/issues/284. That post has lots of details of our investigation. Full details can be read on the GHSA-c827-hfw6-qwvm repo advisory. If a program tries to access a directory with its file descriptor after the file has been unlinked (or any other action that leaves the `Dir` iterator in the stuck state), and the implementation does not break after seeing an error, it can cause a memory explosion. As an example, Linux's various virtual file systems (e.g. `/proc`, `/sys`) can contain directories that spontaneously pop in and out of existence. Attempting to iterate over them using `rustix::fs::Dir` directly or indirectly (e.g. with the `procfs` crate) can trigger this fault condition if the implementation decides to continue on errors. An attacker knowledgeable about the implementation details of a vulnerable target can therefore try to trigger this fault condition via any one or a combination of several available APIs. If successful, the application host will quickly run out of memory, after which the application will likely be terminated by an OOM killer, leading to denial of service. This issue has been addressed in release versions 0.35.15, 0.36.16, 0.37.25, and 0.38.19. Users are advised to upgrade. There are no known workarounds for this issue. |
| The create user function in baltic-it TOPqw Webportal 1.35.287.1 (fixed in version1.35.291), in /Apps/TOPqw/BenutzerManagement.aspx/SaveNewUser, is vulnerable to SQL injection. The JSON object username allows the manipulation of SQL queries. |
| The login form of baltic-it TOPqw Webportal v1.35.283.2 (fixed in version 1.35.283.4) at /Apps/TOPqw/Login.aspx is vulnerable to SQL injection. The vulnerability exists in the POST parameter txtUsername, which allows for manipulation of SQL queries. |
| baltic-it TOPqw Webportal v1.35.283.2 is vulnerable to Incorrect Access Control in the User Management function in /Apps/TOPqw/BenutzerManagement.aspx. This allows a low privileged user to access all modules in the web portal, view and manipulate information and permissions of other users, lock other user or unlock the own account, change the password of other users, create new users or delete existing users and view, manipulate and delete reference data. |
| The "Stammdaten" menu of baltic-it TOPqw Webportal v1.35.283.2 (fixed in version 1.35.291), in /Apps/TOPqw/qwStammdaten.aspx, is vulnerable to persistent Cross-Site Scripting (XSS). |
| The file upload function in the "QWKalkulation" tool of baltic-it TOPqw Webportal v1.35.287.1 (fixed in version 1.35.291), in /Apps/TOPqw/QWKalkulation/QWKalkulation.aspx, is vulnerable to Cross-Site Scripting (XSS). To exploit the persistent XSS vulnerability, an attacker has to be authenticated to the application that uses the "TOPqw Webportal" as a software. When authenticated, the attacker can persistently place the malicious JavaScript code in the "QWKalkulation" menu.' |
| TCPServer.cpp in SimpleNetwork through 29bc615 has an off-by-one error that causes a buffer overflow when trying to add '\0' to the end of long msg data. It can be exploited via crafted TCP packets. |
| An authentication bypass vulnerability was found in Stilog Visual Planning 8. It allows an unauthenticated attacker to receive an administrative API token. |
| An authentication bypass vulnerability was found in Stilog Visual Planning 8. It allows an unauthenticated attacker to brute-force the password reset PINs of administrative users. |
| An XML external entity (XXE) vulnerability was found in Stilog Visual Planning 8. It allows an authenticated attacker to access local server files and exfiltrate data to an external server. |
| Cross Site Scripting vulnerability in AdGuard Application v.7.18.1 (4778) and before allows an attacker to execute arbitrary code via a crafted payload to the fontMatrix component. |
