| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix FCLK pstate change underflow
[Why]
Currently we set FCLK p-state change
watermark calculated based on dummy
p-state latency when UCLK p-state is
not supported
[How]
Calculate FCLK p-state change watermark
based on on FCLK pstate change latency
in case UCLK p-state is not supported |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sprd: Release dma buffer to avoid memory leak
When attaching to a domain, the driver would alloc a DMA buffer which
is used to store address mapping table, and it need to be released
when the IOMMU domain is freed. |
| http.zig commit 76cf5 was discovered to contain a CRLF injection vulnerability via the url parameter. |
| Mingyu Security Gateway before v3.0-5.3p was discovered to contain a remote command execution (RCE) vulnerability via the log_type parameter at /log/fw_security.mds. |
| Cross-Site Request Forgery (CSRF) vulnerability in EnvialoSimple EnvíaloSimple.This issue affects EnvíaloSimple: from n/a through 2.2. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: fix leak of memory fw |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: fix memory leak in hns_roce_alloc_mr()
When hns_roce_mr_enable() failed in hns_roce_alloc_mr(), mr_key is not
released. Compiled test only. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: add missing memcpy in kasan_init
Hi Atish,
It seems that the panic is due to the missing memcpy during kasan_init.
Could you please check whether this patch is helpful?
When doing kasan_populate, the new allocated base_pud/base_p4d should
contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy
to avoid page fault when read/write kasan shadow region.
Tested on:
- qemu with sv57 and CONFIG_KASAN on.
- qemu with sv48 and CONFIG_KASAN on. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: fix null-deref on genl_info in dump
The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on
genl_info in dump") is also needed for ethtool eeprom. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length
of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements
beyond the end of the adp5061_chg_type[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
As the comment of pci_get_domain_bus_and_slot() says, it returns
a PCI device with refcount incremented, so it doesn't need to
call an extra pci_dev_get() in pci_get_dev_wrapper(), and the PCI
device needs to be put in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in
uio_dmem_genirq_irqcontrol()") started calling disable_irq() without
holding the spinlock because it can sleep. However, that fix introduced
another bug: if interrupt is already disabled and a new disable request
comes in, then the spinlock is not unlocked:
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# [ 14.851538] BUG: scheduling while atomic: bash/223/0x00000002
[ 14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc]
[ 14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G OE 6.0.0-rc7 #21
[ 14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 14.855664] Call Trace:
[ 14.855861] <TASK>
[ 14.856025] dump_stack_lvl+0x4d/0x67
[ 14.856325] dump_stack+0x14/0x1a
[ 14.856583] __schedule_bug.cold+0x4b/0x5c
[ 14.856915] __schedule+0xe81/0x13d0
[ 14.857199] ? idr_find+0x13/0x20
[ 14.857456] ? get_work_pool+0x2d/0x50
[ 14.857756] ? __flush_work+0x233/0x280
[ 14.858068] ? __schedule+0xa95/0x13d0
[ 14.858307] ? idr_find+0x13/0x20
[ 14.858519] ? get_work_pool+0x2d/0x50
[ 14.858798] schedule+0x6c/0x100
[ 14.859009] schedule_hrtimeout_range_clock+0xff/0x110
[ 14.859335] ? tty_write_room+0x1f/0x30
[ 14.859598] ? n_tty_poll+0x1ec/0x220
[ 14.859830] ? tty_ldisc_deref+0x1a/0x20
[ 14.860090] schedule_hrtimeout_range+0x17/0x20
[ 14.860373] do_select+0x596/0x840
[ 14.860627] ? __kernel_text_address+0x16/0x50
[ 14.860954] ? poll_freewait+0xb0/0xb0
[ 14.861235] ? poll_freewait+0xb0/0xb0
[ 14.861517] ? rpm_resume+0x49d/0x780
[ 14.861798] ? common_interrupt+0x59/0xa0
[ 14.862127] ? asm_common_interrupt+0x2b/0x40
[ 14.862511] ? __uart_start.isra.0+0x61/0x70
[ 14.862902] ? __check_object_size+0x61/0x280
[ 14.863255] core_sys_select+0x1c6/0x400
[ 14.863575] ? vfs_write+0x1c9/0x3d0
[ 14.863853] ? vfs_write+0x1c9/0x3d0
[ 14.864121] ? _copy_from_user+0x45/0x70
[ 14.864526] do_pselect.constprop.0+0xb3/0xf0
[ 14.864893] ? do_syscall_64+0x6d/0x90
[ 14.865228] ? do_syscall_64+0x6d/0x90
[ 14.865556] __x64_sys_pselect6+0x76/0xa0
[ 14.865906] do_syscall_64+0x60/0x90
[ 14.866214] ? syscall_exit_to_user_mode+0x2a/0x50
[ 14.866640] ? do_syscall_64+0x6d/0x90
[ 14.866972] ? do_syscall_64+0x6d/0x90
[ 14.867286] ? do_syscall_64+0x6d/0x90
[ 14.867626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped
[ 14.872959] </TASK>
('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this)
The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and
it is used in a similar manner to the "uio_pdrv_genirq" driver with respect
to interrupt configuration and handling. At the time "uio_dmem_genirq" was
introduced, both had the same implementation of the 'uio_info' handlers
irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency
issue"), which was only applied to "uio_pdrv_genirq", ended up making them
a little different. That commit, among other things, changed disable_irq()
to disable_irq_nosync() in the implementation of irqcontrol(). The
motivation there was to avoid a deadlock between irqcontrol() and
handler(), since it added a spinlock in the irq handler, and disable_irq()
waits for the completion of the irq handler.
By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also
avoid the sleeping-whil
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix xid leak in cifs_copy_file_range()
If the file is used by swap, before return -EOPNOTSUPP, should
free the xid, otherwise, the xid will be leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: zero out stale pointers
`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
HSI: omap_ssi: Fix refcount leak in ssi_probe
When returning or breaking early from a
for_each_available_child_of_node() loop, we need to explicitly call
of_node_put() on the child node to possibly release the node. |
| Server receiving a malformed message to create a new connection could lead to an attacker performing remote code execution or causing a failure. See Honeywell Security Notification for recommendations on upgrading and versioning.
|
| Multiple SQL Injection vulnerabilities exist in amansuryawanshi Gym-Management-System-PHP 1.0 via the 'name', 'email', and 'comment' parameters in (1) submit_contact.php, the 'username' and 'pass_key' parameters in (2) secure_login.php, and the 'login_id', 'pwfield', and 'login_key' parameters in (3) change_s_pwd.php. An unauthenticated or authenticated attacker can exploit these issues to bypass authentication, execute arbitrary SQL commands, modify database records, delete data, or escalate privileges to administrator level. |
| The vulnerability described by CVE-2023-0972 has been additionally discovered in Silicon Labs Z-Wave end devices. This vulnerability may allow an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution. |
| A bug in Micrium OS Network HTTP Server permits an invalid pointer dereference during header processing - potentially allowing a device crash and Denial of Service. |
| EMS SQL Manager 3.6.2 (build 55333) for Oracle allows DLL hijacking: a user can trigger the execution of arbitrary code every time the product is executed. |
