| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: prevent NULL pointer deref during reload
Calling ethtool during reload can lead to call trace, because VSI isn't
configured for some time, but netdev is alive.
To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors
to 0 after freeing and add a check for ::tx/rx_rings in ring related
ethtool ops.
Add proper unroll of filters in ice_start_eth().
Reproduction:
$watch -n 0.1 -d 'ethtool -g enp24s0f0np0'
$devlink dev reload pci/0000:18:00.0 action driver_reinit
Call trace before fix:
[66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000
[66303.926259] #PF: supervisor read access in kernel mode
[66303.926286] #PF: error_code(0x0000) - not-present page
[66303.926311] PGD 0 P4D 0
[66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI
[66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1
[66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018
[66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice]
[66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48
[66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246
[66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48
[66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000
[66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000
[66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000
[66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50
[66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000
[66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0
[66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[66303.927060] PKRU: 55555554
[66303.927075] Call Trace:
[66303.927094] <TASK>
[66303.927111] ? __die+0x23/0x70
[66303.927140] ? page_fault_oops+0x171/0x4e0
[66303.927176] ? exc_page_fault+0x7f/0x180
[66303.927209] ? asm_exc_page_fault+0x26/0x30
[66303.927244] ? ice_get_ringparam+0x22/0x50 [ice]
[66303.927433] rings_prepare_data+0x62/0x80
[66303.927469] ethnl_default_doit+0xe2/0x350
[66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140
[66303.927538] genl_rcv_msg+0x1b1/0x2c0
[66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10
[66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10
[66303.927615] netlink_rcv_skb+0x58/0x110
[66303.927644] genl_rcv+0x28/0x40
[66303.927665] netlink_unicast+0x19e/0x290
[66303.927691] netlink_sendmsg+0x254/0x4d0
[66303.927717] sock_sendmsg+0x93/0xa0
[66303.927743] __sys_sendto+0x126/0x170
[66303.927780] __x64_sys_sendto+0x24/0x30
[66303.928593] do_syscall_64+0x5d/0x90
[66303.929370] ? __count_memcg_events+0x60/0xa0
[66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30
[66303.930920] ? handle_mm_fault+0x9e/0x350
[66303.931688] ? do_user_addr_fault+0x258/0x740
[66303.932452] ? exc_page_fault+0x7f/0x180
[66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc |
| A prototype pollution in the lib.deep function of @ndhoule/defaults v2.0.1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload. |
| The WooMulti WordPress plugin through 17 does not validate a file parameter when deleting files, which could allow any authenticated users, such as subscriber to delete arbitrary files on the server. |
| A prototype pollution in the lib.parse function of dot-qs v0.2.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload. |
| A prototype pollution in the lib.post function of ajax-request v1.2.3 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload. |
| A prototype pollution in the lib.merge function of cli-util v1.1.27 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload. |
| A vulnerability has been found in Radarr 5.28.0.10274. The affected element is an unknown function of the file C:\ProgramData\Radarr\bin\Radarr.Console.exe of the component Service. Such manipulation leads to incorrect default permissions. The attack can only be performed from a local environment. The vendor was contacted early about this disclosure but did not respond in any way. |
| vanna-ai/vanna version v0.3.4 is vulnerable to SQL injection in some file-critical functions such as `pg_read_file()`. This vulnerability allows unauthenticated remote users to read arbitrary local files on the victim server, including sensitive files like `/etc/passwd`, by exploiting the exposed SQL queries via a Python Flask API. |
| A security issue was found in Netplex Json-smart 2.5.0 through 2.5.1. When loading a specially crafted JSON input, containing a large number of ’{’, a stack exhaustion can be trigger, which could allow an attacker to cause a Denial of Service (DoS). This issue exists because of an incomplete fix for CVE-2023-1370. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
When doing a relocation, there is a chance that at the time of
btrfs_reloc_clone_csums(), there is no checksum for the corresponding
region.
In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item
and so ordered_extent's logical is set to some invalid value. Then,
btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a
block group and will hit an assert or a null pointer dereference as
following.
This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16
times) with a null_blk setup. The device's zone size and capacity is set to
32 MB and the storage size is set to 5 GB on my setup.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00
> 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00
RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827
R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000
R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0
Call Trace:
<TASK>
? die_addr+0x3c/0xa0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs]
btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs]
? rcu_is_watching+0x11/0xb0
? lock_release+0x47a/0x620
? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs]
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs]
? __smp_call_single_queue+0x124/0x350
? rcu_is_watching+0x11/0xb0
btrfs_work_helper+0x19f/0xc60 [btrfs]
? __pfx_try_to_wake_up+0x10/0x10
? _raw_spin_unlock_irq+0x24/0x50
? rcu_is_watching+0x11/0xb0
process_one_work+0x8c1/0x1430
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0x52/0x60
worker_thread+0x100/0x12c0
? __kthread_parkme+0xc1/0x1f0
? __pfx_worker_thread+0x10/0x10
kthread+0x2ea/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
On the zoned mode, writing to pre-allocated region means data relocation
write. Such write always uses WRITE command so there is no need of splitting
and rewriting logical address. Thus, we can just skip the function for the
case. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire-digi00x: prevent potential use after free
This code was supposed to return an error code if init_stream()
failed, but it instead freed dg00x->rx_stream and returned success.
This potentially leads to a use after free. |
| Schlix CMS 2.2.6-6 contains a persistent cross-site scripting vulnerability that allows authenticated users to inject malicious scripts into category titles. Attackers can create a new contact category with a script payload that will execute when the page is viewed by other users. |
| A path traversal vulnerability exists in the XTTS server of the parisneo/lollms package version v9.6. This vulnerability allows an attacker to write audio files to arbitrary locations on the system and enumerate file paths. The issue arises from improper validation of user-provided file paths in the `tts_to_file` endpoint. |
| In the latest version of pytorch/serve, the script 'upload_results_to_s3.sh' references the S3 bucket 'benchmarkai-metrics-prod' without ensuring its ownership or confirming its accessibility. This could lead to potential security vulnerabilities or unauthorized access to the bucket if it is not properly secured or claimed by the appropriate entity. The issue may result in data breaches, exposure of proprietary information, or unauthorized modifications to stored data. |
| The Weave server API allows remote users to fetch files from a specific directory, but due to a lack of input validation, it is possible to traverse and leak arbitrary files remotely. In various common scenarios, this allows a low-privileged user to assume the role of the server admin. |
| DSpace open source software is a repository application which provides durable access to digital resources. Two related XML External Entity (XXE) injection possibilities impact all versions of DSpace prior to 7.6.4, 8.2, and 9.1. External entities are not disabled when parsing XML files during import of an archive (in Simple Archive Format), either from command-line (`./dspace import` command) or from the "Batch Import (Zip)" user interface feature. External entities are also not explicitly disabled when parsing XML responses from some upstream services (ArXiv, Crossref, OpenAIRE, Creative Commons) used in import from external sources via the user interface or REST API. An XXE injection in these files may result in a connection being made to an attacker's site or a local path readable by the Tomcat user, with content potentially being injected into a metadata field. In the latter case, this may result in sensitive content disclosure, including retrieving arbitrary files or configurations from the server where DSpace is running. The Simple Archive Format (SAF) importer / Batch Import (Zip) is only usable by site administrators (from user interface / REST API) or system administrators (from command-line). Therefore, to exploit this vulnerability, the malicious payload would have to be provided by an attacker and trusted by an administrator, who would trigger the import. The fix is included in DSpace 7.6.4, 8.2, and 9.1. Please upgrade to one of these versions. For those who cannot upgrade immediately, it is possible to manually patch the DSpace backend. One may also apply some best practices, though the protection provided is not as complete as upgrading. Administrators must carefully inspect any SAF archives (they did not construct themselves) before importing. As necessary, affected external services can be disabled to mitigate the ability for payloads to be delivered via external service APIs. |
| Markdownify 1.2.0 contains a persistent cross-site scripting vulnerability that allows attackers to store malicious payloads within markdown files. Attackers can upload crafted markdown files with embedded scripts that execute when the file is opened, potentially enabling remote code execution. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Angular uses a DI container (the "platform injector") to hold request-specific state during server-side rendering. For historical reasons, the container was stored as a JavaScript module-scoped global variable. When multiple requests are processed concurrently, they could inadvertently share or overwrite the global injector state. In practical terms, this can lead to one request responding with data meant for a completely different request, leaking data or tokens included on the rendered page or in response headers. As long as an attacker had network access to send any traffic that received a rendered response, they may have been able to send a large number of requests and then inspect the responses for information leaks. The APIs `bootstrapApplication`, `getPlatform`, and `destroyPlatform` were vulnerable and required SSR-only breaking changes.
The issue has been patched in all active release lines as well as in the v21 prerelease. Patched packages include `@angular/platform-server` 21.0.0-next.3, 20.3.0, 19.2.15, and 18.2.14 and `@angular/ssr` 21.0.0-next.3, 20.3.0, 19.2.16, and 18.2.21. Several workarounds are available. Disable SSR via Server Routes or builder options, remove any asynchronous behavior from custom `bootstrap` functions, remove uses of `getPlatform()` in application code, and/or ensure that the server build defines `ngJitMode` as false. |
| The ws.stash.app.mac.daemon.helper tool contains a vulnerability caused by an incorrect use of macOS’s authorization model. Instead of validating the client's authorization reference, the helper invokes AuthorizationCopyRights() using its own privileged context (root), effectively authorizing itself rather than the client. As a result, it grants the system.preferences.admin right internally, regardless of the requesting client's privileges. This flawed logic allows unprivileged clients to invoke privileged operations via XPC, including unauthorized changes to system-wide network preferences such as SOCKS, HTTP, and HTTPS proxy settings. The absence of proper code-signing checks further enables arbitrary processes to exploit this flaw, leading to man-in-the-middle (MITM) attacks through traffic redirection. |
| OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340/D440 provided by Y'S corporation. A user with an administrative privilege who logged in to the web management page of the affected product may execute an arbitrary OS command. |
