| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: driver: Check ACPI_COMPANION() against NULL during probe
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks
against NULL to 13 platform drivers handling core ACPI devices.
Also change the value returned by the ACPI thermal zone driver when
the device's ACPI companion is not present to -ENODEV for consistency
with the other drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: phy: avoid NULL deref when PHY driver is unbound
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Disable broadcast TLB flush when PCID is disabled
Booting with "nopcid" clears X86_FEATURE_PCID and keeps CR4.PCIDE from being
set to one. On AMD CPUs that support INVLPGB, broadcast TLB flushing remains
enabled.
There are two checks that decide whether the global ASID code runs,
mm_global_asid() and consider_global_asid(), that key off of the
X86_FEATURE_INVLPGB feature. Once an mm becomes active on more than three
CPUs, consider_global_asid() assigns it a global ASID, after which
flush_tlb_mm_range() takes the broadcast_tlb_flush() path using a non-zero
PCID. Issuing an INVLPGB with a non-zero PCID while CR4.PCIDE is not set
results in a #GP:
Oops: general protection fault, kernel NULL pointer dereference 0x1: 0000 [#1] SMP NOPTI
CPU: 158 UID: 0 PID: 3119 Comm: snap Not tainted 7.1.0-rc3 #1 PREEMPT(full)
Hardware name: ...
RIP: 0010:broadcast_tlb_flush
Code: ... 89 da 48 83 c8 07 <0f> 01 fe eb 08 cc cc cc ...
Call Trace:
<TASK>
flush_tlb_mm_range
ptep_clear_flush
wp_page_copy
? _raw_spin_unlock
__handle_mm_fault
handle_mm_fault
do_user_addr_fault
exc_page_fault
asm_exc_page_fault
All processors that support broadcast TLB invalidation also have PCID support,
so it is only the "nopcid" scenario that is of concern. In this situation just
disable the broadcast TLB support using the CPUID dependency support by making
X86_FEATURE_INVLPGB dependent on X86_FEATURE_PCID.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix deadlock on shared proxy's parent removal
Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation. |
| In the Linux kernel, the following vulnerability has been resolved:
block: recompute nr_integrity_segments in blk_insert_cloned_request
blk_insert_cloned_request() already recomputes nr_phys_segments
against the bottom queue, because "the queue settings related to
segment counting may differ from the original queue." The exact same
reasoning applies to integrity segments: a stacked driver's underlying
queue can have tighter virt_boundary_mask, seg_boundary_mask, or
max_segment_size than the top queue, in which case
blk_rq_count_integrity_sg() against the bottom queue produces a
different count than the cached rq->nr_integrity_segments inherited
from the source request by blk_rq_prep_clone().
When the cached count is lower than the bottom queue's actual count,
blk_rq_map_integrity_sg() trips
BUG_ON(segments > rq->nr_integrity_segments);
on dispatch. The same families of stacked setups that motivated the
existing nr_phys_segments recompute -- dm-multipath fanning out to
nvme-rdma in particular -- can produce this.
Mirror the nr_phys_segments handling: when the request carries
integrity, recompute nr_integrity_segments against the bottom queue
and reject the request if it exceeds the bottom queue's
max_integrity_segments. blk_rq_count_integrity_sg() and
queue_max_integrity_segments() are both already available via
<linux/blk-integrity.h>, which blk-mq.c includes.
This closes a latent gap in the stacking contract and brings the
integrity-segment accounting in line with the existing
phys-segment accounting. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix EFAULT clobber in fuse_uring_commit
copy_from_user() returns the number of bytes not copied as an unsigned
residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit
stores that residual in ssize_t err, sets req->out.h.error to -EFAULT,
then jumps to out: with err still holding the positive residual.
err = copy_from_user(&req->out.h, &ent->headers->in_out,
sizeof(req->out.h));
if (err) {
req->out.h.error = -EFAULT;
goto out; /* err is the positive residual */
}
...
out:
fuse_uring_req_end(ent, req, err);
fuse_uring_req_end() then runs
if (error)
req->out.h.error = error;
which overwrites the just-assigned -EFAULT with the positive residual.
FUSE callers such as fuse_simple_request() test err < 0 to detect
failure, so the positive value is interpreted as success and the
caller proceeds with an uninitialised or partial req->out.args.
Fix by assigning err = -EFAULT in the failure branch before jumping
to out, so fuse_uring_req_end() receives a negative errno and sets
req->out.h.error to -EFAULT. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check to response query
Add variable representations for BufLength and BufOffset in
rndis_query_response(), and perform a length check on them.
This is identical to how rndis_set_response() handles these parameters. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: hold an interface reference across the scan worker
mac802154_scan_worker() captures the scanning sub-interface under RCU
and then keeps dereferencing sdata->dev after rcu_read_unlock() and
outside the rtnl -- in the failure traces, in
mac802154_transmit_beacon_req() (skb->dev = sdata->dev), and in the
end_scan cleanup. Nothing keeps that netdev alive across the worker
iteration.
A concurrent DEL_INTERFACE or PHY removal can unregister the interface
once the worker drops the rtnl between its two drv_set_channel()
sections. unregister_netdevice() frees the netdev asynchronously from
netdev_run_todo() with the rtnl already dropped, so neither holding the
rtnl nor the per-PHY IEEE802154_IS_SCANNING flag prevents a stale worker
iteration from dereferencing the freed netdev -- a KASAN
slab-use-after-free, reachable by racing TRIGGER_SCAN against
DEL_INTERFACE (both CAP_NET_ADMIN).
Pin the netdev with netdev_hold() while the RCU read lock is still held,
and release it at every worker exit. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: fix location monitor leak in tsi148 bridge
tsi148_probe() allocates a location monitor resource and links it into
tsi148_bridge->lm_resources. The probe error path frees this list, but
tsi148_remove() only frees the dma, slave and master resource lists, so
the location monitor resource is leaked on device unbind or module
unload.
Free the lm_resources list in tsi148_remove() as well, before
tsi148_bridge is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4.4.2: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9.4.3: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: write all dirty file folios when collapsing
[There is no upstream commit, as this code was removed by upstream
commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")]
As-is, khugepaged and writable-file opening exclude each other. A file
cannot be open writeable and have THPs (because the filesystem is not aware
of them). khugepaged will never collapse file pages for files that are
opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that
particular file is dropped. This is fine because nothing could've been
dirtied.
However, there is an edge-case: collapse_file() might not be able to
coexist with concurrent writers, but it can coexist with dirty folios
(from previous writers). Therefore, the following can happen:
open(file, O_RDWR)
write(file)
close(file)
madvise(file_mapping, MADV_COLLAPSE, some non-dirty range)
open(file, O_RDWR)
nr_thps > 0
truncate_inode_pages()
/* THPs are cleared out, but so are the dirty folios */
When this edge-case happens, there is data loss, as the dirty folios are
fully discarded.
Fix it by fully writing back the page cache (and waiting) when collapsing
file THPs. Doing so provides the guarantee that no dirty folio will be
observed while there are active THPs. To fully ensure this is safe, the
invalidate_lock needs to be held while doing the writeout, so that
do_dentry_open()'s page cache truncation excludes this write-and-wait.
As a side effect, move the nr_thps counter bumping outside the i_pages
lock. This is correct since the counter itself is an atomic_t and the
producer <-> consumer correctness is provided by a full memory barrier:
smp_mb() in collapse_file()/memory barrier implied by full ordering in
get_write_access() -> atomic_inc_unless_negative(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()
wacom_wac_queue_flush() is called via the .raw_event callback
(wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush).
For USB HID devices, this callback is invoked from hid_irq_in(), which
is a URB completion handler running in atomic context. Using GFP_KERNEL
in this path can sleep, leading to a "scheduling while atomic" bug.
Use GFP_ATOMIC instead. The existing code already handles allocation
failure by skipping the fifo entry and continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: core: fix uninitialized data in debugfs
If *ppos is non-zero then simple_write_to_buffer() will not initialize
the start of buf[]. Non zero values for *ppos aren't going to work
anyway. Test for them at the start of the function and return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Plug race against a concurrent OOM disable
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places. |
| In the Linux kernel, the following vulnerability has been resolved:
time/jiffies: Register jiffies clocksource before usage
Teddy reported that a XEN HVM has a long boot delay, which was bisected to
the recent enhancements to the negative motion detection. It turned out
that the jiffies clocksource is used in early boot before it is registered,
which leaves the max_delta_raw field at zero. That causes the read out to
be clamped to the max delta of 0, which means time is not making progress.
Cure it by ensuring that it is initialized before its first usage in
timekeeping_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma7.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit c4f230b51cf2d3e7e8b1c800331f3dbed2a9e3f5) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate ranges in damon_set_regions()
DAMON core logic assumes zero length regions don't exist. However, a few
DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT
allow users to set empty monitoring target regions. This could result in
WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and
divide-by-zero from damon_merge_two_regions().
For example, the WANR_ONCE() can be triggered like below.
# grep DAMON_DEBUG_SANITY /boot/config-$(uname -r)
# CONFIG_DAMON_DEBUG_SANITY=y
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/targets/0/regions/0/start
# echo 0 > contexts/0/targets/0/regions/0/end
# echo commit > state
# dmesg
[....]
[ 73.705780] ------------[ cut here ]------------
[ 73.707552] start 0 >= end 0
[ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758
[...]
All DAMON API callers eventually use damon_set_regions() to setup the
regions. Add the validation logic in the function. |
