| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| A vulnerability in the management interface access control list (ACL) processing feature in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass configured ACLs for the SSH, NetConf, and gRPC features.
This vulnerability exists because management interface ACLs have not been supported on Cisco IOS XR Software Packet I/O infrastructure platforms for Linux-handled features such as SSH, NetConf, or gRPC. An attacker could exploit this vulnerability by attempting to send traffic to an affected device. A successful exploit could allow the attacker to bypass an ingress ACL that is applied on the management interface of the affected device. |
| A vulnerability in the Address Resolution Protocol (ARP) implementation of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to trigger a broadcast storm, leading to a denial of service (DoS) condition on an affected device.
This vulnerability is due to how Cisco IOS XR Software processes a high, sustained rate of ARP traffic hitting the management interface. Under certain conditions, an attacker could exploit this vulnerability by sending an excessive amount of traffic to the management interface of an affected device, overwhelming its ARP processing capabilities. A successful exploit could result in degraded device performance, loss of management connectivity, and complete unresponsiveness of the system, leading to a DoS condition. |
| A vulnerability in the web-based management interface of Cisco Catalyst Center Virtual Appliance could allow an unauthenticated, remote attacker to redirect a user to a malicious web page.
This vulnerability is due to improper input validation of HTTP request parameters. An attacker could exploit this vulnerability by intercepting and modifying an HTTP request from a user. A successful exploit could allow the attacker to redirect the user to a malicious web page. |
| A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication.
This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device. |
| A vulnerability in the CLI of Cisco UCS Manager Software could allow an authenticated, local attacker with administrative privileges to read or create a file or overwrite any file on the file system of the underlying operating system of an affected device, including system files.
This vulnerability is due to insufficient input validation of command arguments supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to read or create a file or overwrite any file on the file system of the underlying operating system of the affected device, including system files. To exploit this vulnerability, the attacker must have valid administrative credentials on the affected device. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
| A vulnerability in the logging feature of Cisco NX-OS Software for Cisco Nexus 3000 Series Switches, Cisco Nexus 9000 Series Switches in standalone NX-OS mode, Cisco UCS 6400 Fabric Interconnects, Cisco UCS 6500 Series Fabric Interconnects, and Cisco UCS 9108 100G Fabric Interconnects could allow an authenticated, local attacker access to sensitive information.
This vulnerability is due to improper logging of sensitive information. An attacker could exploit this vulnerability by accessing log files on the file system where they are stored. A successful exploit could allow the attacker to access sensitive information, such as stored credentials. |
| Multiple vulnerabilities in the CLI and web-based management interface of Cisco UCS Manager Software could allow an authenticated, remote attacker with administrative privileges to perform command injection attacks on an affected system and elevate privileges to root.
These vulnerabilities are due to insufficient input validation of command arguments supplied by the user. An attacker could exploit these vulnerabilities by authenticating to a device and submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of the affected device with root-level privileges. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the Cisco Industrial Ethernet Switch Device Manager (DM) of Cisco IOS Software could allow an authenticated, remote attacker to elevate privileges.
This vulnerability is due to insufficient validation of authorizations for authenticated users. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to elevate privileges to privilege level 15.
To exploit this vulnerability, the attacker must have valid credentials for a user account with privilege level 5 or higher. Read-only DM users are assigned privilege level 5. |
| A vulnerability in the certificate processing of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of SSL/TLS certificates. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static Network Address Translation (NAT) rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the GUI of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device.
This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload using the Cisco ISE GUI. A successful exploit could allow the attacker to upload arbitrary files to an affected system. |
| Tinycontrol LAN Controller v3 (LK3) firmware versions up to 1.58a (hardware v3.8) contain a missing authentication vulnerability in the stm.cgi endpoint. A remote, unauthenticated attacker can send crafted requests to forcibly reboot the device or restore factory settings, leading to a denial of service and configuration loss. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability in the DHCP client functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to exhaust available memory.
This vulnerability is due to improper validation of incoming DHCP packets. An attacker could exploit this vulnerability by repeatedly sending crafted DHCPv4 packets to an affected device. A successful exploit could allow the attacker to exhaust available memory, which would affect availability of services and prevent new processes from starting, resulting in a Denial of Service (DoS) condition that would require a manual reboot.
Note: On Cisco Secure FTD Software, this vulnerability does not affect management interfaces. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute a command injection attack on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid user credentials on the affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by entering crafted input as the argument of an affected CLI command. A successful exploit could allow the attacker to read and write files on the underlying operating system with the privileges of a non-root user account. File system access is limited to the permissions that are granted to that non-root user account. |
