| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: check allocation under invalidate lock
commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in
invalidating cache blocks") added mq->lock around the destructive part of
smq_invalidate_mapping(), but left the e->allocated check outside the
critical section.
That leaves a check-then-act race. Two concurrent invalidators can both
observe e->allocated as true before either of them takes mq->lock. The
first invalidator that acquires the lock removes the entry from the
queues and hash table and then calls free_entry(), which clears
e->allocated and puts the entry back on the free list. The second
invalidator can then acquire mq->lock and continue with the stale result
of the unlocked check.
This can corrupt the SMQ queues or hash table by deleting an entry that
is no longer on those structures. It can also hit the allocation check in
free_entry() when the same entry is freed again.
Move the allocation check under mq->lock so the predicate and the
destructive operations are serialized by the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix io_thread race in rxrpc_wake_up_io_thread()
rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but
then reloads the pointer for wake_up_process().
local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so
the second load can see NULL even if the first load did not.
Take a READ_ONCE() snapshot and use it for both the NULL check and the
wake_up_process() call, as rxrpc_encap_rcv() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Handle torn-down topology gracefully in drm_dp_mst_topology_queue_probe()
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost. |
| IBM Aspera Desktop App 1.0.5 through 1.0.19 can allow arbitrary code execution by loading DLL files at start-up. |
| IBM Aspera Desktop App 1.0.5 through 1.0.19 IBM Aspera for desktop can allow files to be written outside of the user's selected download destination. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gigabyte_waterforce) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison
The local-vs-remote region comparison loop uses '<=' instead of '<',
causing it to read one entry past the valid range of qr_regions. The
other loops in the same function correctly use '<'.
Fix the loop condition to use '<' for consistency and correctness. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/napi: cap busy_poll_to 10 msec
Currently there's no cap on the maximum amount of time that napi is
allowed to poll if no events are found, which can lead to kernel
complaints on a task being stuck as there's no conditional rescheduling
done within that loop.
Just cap it to 10 msec in total, that's already way above any kind of
sane value that will reap any benefits, yet low enough that it's
nowhere near being able to trigger preemption complaints. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: reject short frames before parsing
A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the
packet type byte immediately and, for control packets, reads the control
opcode and setup UUID-size byte before proving that those bytes are
present. bnep_rx_control() also dereferences the control opcode without
rejecting an empty control payload.
Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL
return gates each dereference. Split the control handler so the frame
path can pass an opcode that has already been pulled, and keep the
byte-buffer wrapper for extension control payloads.
For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the
setup payload. struct bnep_setup_conn_req carries destination and source
service UUIDs after that byte, each uuid_size bytes, so the parser now
documents that tuple explicitly instead of leaving the pull length as an
opaque multiplication.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790
The buggy address belongs to the object at ffff88800c0f7908 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 1-byte
region [ffff88800c0f7908, ffff88800c0f7909)
Read of size 1
Call trace:
dump_stack_lvl+0xb3/0x140 (?:?)
print_address_description+0x57/0x3a0 (?:?)
bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306)
print_report+0xb9/0x2b0 (?:?)
__virt_addr_valid+0x1ba/0x3a0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
kasan_addr_to_slab+0x21/0x60 (?:?)
kasan_report+0xe0/0x110 (?:?)
process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200)
worker_thread+0x65c/0xe40 (?:?)
__kthread_parkme+0x184/0x230 (?:?)
kthread+0x35e/0x470 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
ret_from_fork+0x586/0x870 (?:?)
__switch_to+0x74f/0xdc0 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: add mutex to guard hook reference counting
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers
smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn
into a local with neither READ_ONCE() nor a NULL check. Both run from
oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a
concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL
under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then
writes through NULL at offset 0xc4 -- a remotely triggerable oops.
Guard both reads the way compare_guid_key() already does: read
opinfo->conn with READ_ONCE() and return early if it is NULL, before
allocating the work struct so nothing leaks. A NULL conn means the
client is gone and the break is moot, so return 0; oplock_break() treats
that as success and runs the normal teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix use-after-free on sbi->sync_decompress
z_erofs_decompress_kickoff() can race with filesystem unmount, causing
a use-after-free on sbi->sync_decompress.
When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff()
to queue z_erofs_decompressqueue_work() asynchronously. Then, after all
folios are unlocked, unmount workflow can proceed and sbi will be freed
before accessing to sbi->sync_decompress.
Thread (unmount) I/O completion kworker
queue_work
z_erofs_decompressqueue_work
(all folios are unlocked)
cleanup_mnt
..
erofs_kill_sb
erofs_sb_free
kfree(sbi)
access sbi->sync_decompress // UAF!! |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Put CPU offline callback in ONLINE section to allow failure
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error()
dereferences p->comm and p->pid. If the iterator's reference is the last
drop, the task is freed synchronously and the deref becomes a UAF.
Move put_task_struct() past scx_error(). |
