| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix use-after-free in ump_to_endpoint()
create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a
back-pointer to its per-interface snd_usb_midi2_ump object in
ump->private_data, but it never installs an ump->private_free hook and
never clears that pointer.
If a later step of snd_usb_midi_v2_create() fails, its error path calls
free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while
the already-registered endpoint keeps pointing at it. The created
/dev/snd/umpC*D* node stays exposed, so the first operation of any UMP
open, ump_to_endpoint(), dereferences the dangling ump->private_data and
reads rmidi->eps[dir] out of freed memory.
A malicious USB MIDI 2.0 device that makes creation fail after the
endpoint is registered can thus trigger a slab use-after-free read on a
subsequent open of the UMP node.
Clear the endpoint's back-pointer before freeing the object, and let
ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger
callbacks fail cleanly (their callers already handle a NULL endpoint)
instead of dereferencing a stale pointer.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the reception of a reply packet before data transmission
Fix rxrpc_receiving_reply() to handle the reception of an apparent reply
DATA packet before rxrpc has had a chance to send any request DATA packets
on a client call by checking to see if the call has been exposed yet by
sending the first packet.
Without this, rxrpc_rotate_tx_window() might oops.
Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by
changing the do...while loop into a while loop, just in case a call is
abnormally terminated by an early reply before the last request packet is
transmitted. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released
call if MSG_PEEK is in force (the function holds a ref on the call
irrespective of whether MSG_PEEK is specified or not). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Zero the tile state data array before each BIN job
The binner BO is a single 16MB buffer split into 512KB slots that are
handed out to jobs at submission time and recycled as jobs complete,
without ever being cleared. Each slot holds the job's Tile State Data
Array (TSDA) at its start, followed by the tile allocation pool.
While the tile allocation pool is only walked by the render thread
through branches the binner generated during the current job, the
TSDA is the PTB's own per-tile bookkeeping and is consumed by the
hardware itself. Although the kernel sets the "Auto-initialise Tile
State Data Array" flag in the tile binning mode configuration, the
PTB demonstrably still acts on stale tile state left by the slot's
previous user: the binner ends up creating invalid command streams
with invalid primitive streams and branches, which can cause GPU hangs
as observed in [1][2].
Zero the TSDA when the job's binning slot is configured. This clears
48 bytes per tile (~24KB for a 1080p frame) in the submission path, and
guarantees the PTB never sees another job's tile state.
The tile count is only checked for being non-zero today, so the 8-bit
fields it comes from can describe a tile state array almost six times
larger than the slot it has to live in. Bound it before the slot is
handed out, since such size decides how much of the slot is left for
the tile alloc pool. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs
commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning
htab with internal structs") moved inode cleanup from ->free_inode()
into ->destroy_inode() to avoid sleeping in RCU context when calling
bpf_any_put(). However this removed the RCU delay on freeing the
inode itself and the cached symlink body (i_link), both of which
can be accessed by RCU pathwalk (pick_link, may_lookup etc.).
This causes a use-after-free when a concurrent unlinkat() drops the
last inode reference and destroy_inode() frees the inode immediately,
while another task is still walking the path in RCU mode and reads
inode->i_opflags (offset +2) inside current_time() -> is_mgtime().
KASAN reports:
BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313
Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags)
The rules (per Al Viro):
->destroy_inode() called immediately, can sleep, use for blocking
cleanup e.g. bpf_any_put()
->free_inode() called after RCU grace period, use for freeing
inode and anything RCU-accessible e.g. i_link
Fix: split the two concerns properly:
- keep bpf_any_put() in bpf_destroy_inode() since it is blocking
and needs to run promptly
- introduce bpf_free_inode() to handle kfree(i_link) and
free_inode_nonrcu() with proper RCU delay, preventing the UAF |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish()
In luo_file_unpreserve_files() and luo_file_finish(), reorder
module_put() and xa_erase() to ensure the file handler module remains
pinned while its operations are being accessed.
Specifically, luo_get_id() dereferences fh->ops->get_id, so the module
reference must be held until after xa_erase() (which calls luo_get_id)
completes.
For luo_file_finish(), this requires moving the module_put() call out of
the luo_file_finish_one() helper and into the main loop of
luo_file_finish() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: rebase copied fsdlm LVB pointers in locking_state
The locking_state debugfs iterator snapshots struct ocfs2_lock_res by
value under ocfs2_dlm_tracking_lock and later formats that copy in
ocfs2_dlm_seq_show(). That is fine for the inline fields, but the
userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once
the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still
points into the original lockres owner, so teardown can free that
container before the debugfs dump walks the raw LVB bytes.
Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw
LVB. The seq snapshot already carries the inline LVB storage reserved in
struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes
without borrowing the original lockres lifetime.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state reader: lockres teardown:
1. ocfs2_dlm_seq_start()/next() 1. file release or another owner
copies struct ocfs2_lock_res teardown reaches
2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free()
the copied row 2. the lockres is removed from the
3. ocfs2_dlm_lvb() follows the tracking list
copied sb_lvbptr 3. the owner frees the original
lockres container
Validation reproduced this kernel report:
KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430
RIP: 0033:0x7f8ec4b1e29d
The buggy address belongs to the object at ffff88810a1e0800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 368 bytes inside of freed 1024-byte region
[ffff88810a1e0800, ffff88810a1e0c00)
Read of size 1
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
seq_read_iter+0x29d/0x790
seq_read+0x20a/0x280
find_held_lock+0x2b/0x80
rcu_read_unlock+0x18/0x70
full_proxy_read+0x9e/0xd0
vfs_read+0x12c/0x590
ksys_read+0xd2/0x170
do_user_addr_fault+0x65a/0x890
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
ocfs2_file_open+0x13e/0x300
do_dentry_open+0x233/0x7f0
vfs_open+0x5a/0x1b0
path_openat+0x66d/0x1540
do_file_open+0x186/0x2b0
do_sys_openat2+0xce/0x150
__x64_sys_openat+0xd0/0x140
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
ocfs2_file_release+0x138/0x260
__fput+0x1df/0x4b0
fput_close_sync+0xd2/0x170
__x64_sys_close+0x55/0x90
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails
The global pointer 'reserved_mem' continues to reference the
reserved_mem_array which lives in __initdata if
alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is
exported for post-init use, that would dereference freed memory
and trigger a use-after-free.
So reset reserved_mem_count to 0 when alloc_reserved_mem_array()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs_lookup(): don't leave ->s_dentry dangling on failure
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so... |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: fix head underflow on XDP head-grow
The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on
a bnxt machine (and also crashes in NIPA).
It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which
builds the skb head:
napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size);
The problem with this expression is that in page mode, rx_offset is:
bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM;
Which evaluates (at least on x86_64) to 258.
The test test_xdp_native_adjst_head_grow_data tests a case where the
head is adjusted by -256.
When this test runs, data_ptr is shifted to frag_start + 2 (where
frag_start = page_address(page) + offset).
Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb
expression subtracts 258, landing at an address before frag_start. This
could be either the previous fragment or the previous physical page when
the offset is < 256 (e.g. if the fragment started at offset 0).
When the skb is freed, the page pool fragment reference is dropped on
either the wrong page or the wrong frag of the right page. In either
case, the corrupted reference count can lead to the page being
prematurely recycled while still in use. Once (incorrectly) recycled, it
can be handed out again and on driver teardown this would result in a
double free.
The commit under fixes updated this code to handle the case where the
native page size is >= 64k, but it unintentionally broke the head grow
case.
To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the
existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on
allocation and preserve it on reuse.
In bnxt_rx_multi_page_skb, use the newly added offset field to compute
the fragment start and pass that to napi_build_skb. Adjust the layout
with skb_reserve.
There are two cases, the non-adjustment case and the adjustment case.
In both cases, the skb is built at page_address(page) + offset to
account for the case where the native page size >= 64K and skb_reserve
is called with data_ptr - (page_address(page) + offset). That
difference equals bp->rx_offset when data_ptr was not moved, or
bp->rx_offset + xdp_adjust when XDP adjusted the head.
Re-running the failing test with this commit applied causes the test to
run successfully to completion.
The other rx_skb_func implementations don't have this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
Free the UAR index returned by the hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decouple req recycling from RPC completion
rl_kref formerly served two distinct lifetimes through a single
refcount: it gated when a Reply could wake its RPC task, and it
gated when an rpcrdma_req could return to its free pool. The
marshal path took the Send-side reference only when SGEs needed
DMA-unmap (sc_unmap_count > 0), which made a Send carrying only
pre-registered buffers an exception: the Reply handler dropped
rl_kref from 1 to 0 and freed the req while the HCA might still
be DMA-reading from its send buffer.
Give rl_kref a narrower job. The RPC layer takes one reference
when slot allocation hands a req out. rpcrdma_prepare_send_sges()
takes a Send-side reference unconditionally after WR preparation
succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop
the RPC-layer reference; rpcrdma_sendctx_unmap() drops the
Send-side reference. The req returns to its free pool only after
both owners have signed off.
The existing kref_init(&req->rl_kref) call in
rpcrdma_prepare_send_sges() is removed. Initialization moves to
the slot-allocation paths (xprt_rdma_alloc_slot and
rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref
before the req returns to a free pool. A re-init in the marshal
path would discard the RPC-layer reference that already exists
on entry.
Three invariants follow:
- Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1.
xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the
backlog-wake branch in xprt_rdma_alloc_slot() each kref_init
rl_kref before publishing the req. Without this invariant,
an RPC task that aborts between slot allocation and marshal
(gss_refresh failure or signal during call_connect, for
example) would drive xprt_release() ->
xprt_rdma_free_slot() -> kref_put against a refcount of
zero, saturating refcount_t and stranding the slot.
- The Send-side reference is taken only after WR prep
succeeds. A mapping failure in rpcrdma_prepare_send_sges()
runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx
and clears sc_req without touching rl_kref. The sendctx
ring walks in rpcrdma_sendctx_put_locked() and
rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL,
so a burst of -EIO marshal failures cannot hold reqs off
rb_send_bufs.
- The release callback re-arms rl_kref so the next consumer
enters with the invariant satisfied.
Replies now complete the RPC directly. rpcrdma_reply_handler()
calls rpcrdma_complete_rqst() in place of kref_put on the
non-LocalInv branch. The LocalInv branch already completes the
RPC from frwr_unmap_async() and is unaffected.
Because Send-side references can now outlive RPC completion,
connection teardown drains sendctx entries whose unsignaled
Sends never had a later signaled completion to walk the ring.
rpcrdma_sendctxs_destroy() walks the active range and runs
rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req
before the request buffers are reset, and is moved ahead of
rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs
are still in their pre-reset state when the Send-side refs are
released.
The drain creates a teardown-ordering hazard on the backchannel
path. With the new lifetime, releasing a bc_prealloc req from
rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect
in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has
already emptied bc_pa_list, so the drained reqs would otherwise
leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0)
a second time after the disconnect to reclaim them. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix possible use after free
In dma_release_channel(), check chan->device->privatecnt after call
dma_chan_put(). However, dma_chan_put() call dma_device_put() which could
release the last reference of the device if the DMA provider is already
gone and hence free it.
Fixes it by moving dma_chan_put() after the check. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix UAF in hci_unregister_dev()
hci_unregister_dev() does not disable cmd_timer and ncmd_timer
before the hci_dev structure is freed. If a timeout fires
during device teardown, the callback dereferences freed memory
(including the hdev->reset function pointer), leading to a
use-after-free.
Add disable_delayed_work_sync() calls alongside the existing
disable_work_sync() calls to ensure both timers are fully
quiesced before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: hold vduse_lock across IDR lookup in open path
vduse_dev_open() looks up struct vduse_dev through the IDR and then
acquires dev->lock only after vduse_lock has been dropped.
This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the
same object from the IDR and free it before the open path locks the
device, leading to a use-after-free.
Close this race by keeping vduse_lock held until dev->lock has been
acquired in the open path, matching the lock ordering already used by
the destroy path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: serialize netif_running() check in enqueue_to_backlog()
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq. |
| In the Linux kernel, the following vulnerability has been resolved:
sockmap: Fix use-after-free in udp_bpf_recvmsg()
syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0]
sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock,
but its processing is lockless.
Thus, sk_msg_recvmsg() must be serialised by callers, otherwise
multiple threads could touch the same sk_msg.
For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock.
Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited
commit removed it.
Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg().
Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not
an option due to copy_page_to_iter() in sk_msg_recvmsg().
[0]:
BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020
CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84
inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891
sock_recvmsg_nosec net/socket.c:1078 [inline]
sock_recvmsg+0x1a8/0x270 net/socket.c:1100
____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812
___sys_recvmsg+0x215/0x590 net/socket.c:2854
do_recvmmsg+0x334/0x800 net/socket.c:2949
__sys_recvmmsg net/socket.c:3023 [inline]
__do_sys_recvmmsg net/socket.c:3046 [inline]
__se_sys_recvmmsg net/socket.c:3039 [inline]
__x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb319f9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9
RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004
RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98
</TASK>
Allocated by task 6019:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
alloc_sk_msg net/core/skmsg.c:510 [inline]
sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612
sk_psock_verdict_apply net/core/skmsg.c:1038 [inline]
sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236
udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045
sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257
__udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789
__udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline]
udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475
__udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585
__udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318
dst_input include/net/dst.h:474 [inline]
ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584
ip_list_rcv_finish net/ipv4/ip_inp
---truncated--- |
