| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent decl_tag from being referenced in func_proto arg
Syzkaller managed to hit another decl_tag issue:
btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
btf_check_all_types kernel/bpf/btf.c:4734 [inline]
btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
btf_parse kernel/bpf/btf.c:5042 [inline]
btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
__sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
__do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being
referenced in func_proto") but for the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int3472: Fix double free of GPIO device during unregister
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()
A NULL check for bridge->encoder shows that it may be NULL, but it
already been dereferenced on all paths leading to the check.
812 if (!bridge->encoder) {
Dereference the pointer bridge->encoder.
810 drm_connector_attach_encoder(<9611->connector, bridge->encoder); |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug_on in __es_tree_search caused by bad boot loader inode
We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:203!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349
RIP: 0010:ext4_es_end.isra.0+0x34/0x42
RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__es_tree_search.isra.0+0x6d/0xf5
ext4_es_cache_extent+0xfa/0x230
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_mpage_readpages+0x48e/0xe40
ext4_readahead+0x47/0x50
read_pages+0x82/0x530
page_cache_ra_unbounded+0x199/0x2a0
do_page_cache_ra+0x47/0x70
page_cache_ra_order+0x242/0x400
ondemand_readahead+0x1e8/0x4b0
page_cache_sync_ra+0xf4/0x110
filemap_get_pages+0x131/0xb20
filemap_read+0xda/0x4b0
generic_file_read_iter+0x13a/0x250
ext4_file_read_iter+0x59/0x1d0
vfs_read+0x28f/0x460
ksys_read+0x73/0x160
__x64_sys_read+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================
In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.
When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.
The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix refcount leak in hns_roce_mmap
rdma_user_mmap_entry_get_pgoff() takes the reference.
Add missing rdma_user_mmap_entry_put() to release the reference.
Acked-by Haoyue Xu <xuhaoyue1@hisilicon.com> |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Implement settime64 with -EOPNOTSUPP
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: Fix musb_gadget.c rxstate overflow bug
The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt); |
| In the Linux kernel, the following vulnerability has been resolved:
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
pm_runtime_get_sync() will increment pm usage counter.
Forgetting to putting operation will result in reference leak.
Add missing pm_runtime_put_sync in some error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: Make port I/O string accessors actually work
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
causing a memory access fault:
Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60
gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000
t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0
s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000
a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb
a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000
s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50
s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000
s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000
s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930
t5 : 0000000000001000 t6 : 0000000000040000
status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f
[<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<ffffffff8053bbc0>] parport_write+0x46/0xf8
[<ffffffff8050530e>] lp_write+0x158/0x2d2
[<ffffffff80185716>] vfs_write+0x8e/0x2c2
[<ffffffff80185a74>] ksys_write+0x52/0xc2
[<ffffffff80185af2>] sys_write+0xe/0x16
[<ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace 0000000000000000 ]---
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Fix refcount leak in erdma_mmap
rdma_user_mmap_entry_get() take reference, we should release it when not
need anymore, add the missing rdma_user_mmap_entry_put() in the error
path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove
In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses
a reference of pointer as the argument of kfree, which is the wrong pointer
and then may hit crash like this:
Unable to handle kernel paging request at virtual address 00ffff003363e30c
Internal error: Oops: 96000004 [#1] SMP
Call trace:
rb_next+0x20/0x5c
ext4_readdir+0x494/0x5c4 [ext4]
iterate_dir+0x168/0x1b4
__se_sys_getdents64+0x68/0x170
__arm64_sys_getdents64+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821)
SMP: stopping secondary CPUs
Starting crashdump kernel... |
| In the Linux kernel, the following vulnerability has been resolved:
9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN
p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq)
if list_empty(&m->req_list).
However, if the pipe is full, we need to read more data and this used to
work prior to commit aaec5a95d59615 ("pipe_read: don't wake up the writer
if the pipe is still full").
p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before
the commit above) triggered the unnecessary wakeup. This wakeup calls
p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux()
will notice EPOLLIN and schedule_work(&m->rq).
This no longer happens after the optimization above, change p9_fd_request()
to use p9_poll_mux() instead of only checking for EPOLLOUT. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix shift-out-of-bounds due to too large exponent of block size
If field s_log_block_size of superblock data is corrupted and too large,
init_nilfs() and load_nilfs() still can trigger a shift-out-of-bounds
warning followed by a kernel panic (if panic_on_warn is set):
shift exponent 38973 is too large for 32-bit type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
ubsan_epilogue+0xb/0x50
__ubsan_handle_shift_out_of_bounds.cold.12+0x17b/0x1f5
init_nilfs.cold.11+0x18/0x1d [nilfs2]
nilfs_mount+0x9b5/0x12b0 [nilfs2]
...
This fixes the issue by adding and using a new helper function for getting
block size with sanity check. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: prevent decl_tag from being referenced in func_proto
Syzkaller was able to hit the following issue:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 3609 at kernel/bpf/btf.c:1946
btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946
Modules linked in:
CPU: 0 PID: 3609 Comm: syz-executor361 Not tainted
6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 09/22/2022
RIP: 0010:btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946
Code: ef e8 7f 8e e4 ff 41 83 ff 0b 77 28 f6 44 24 10 18 75 3f e8 6d 91
e4 ff 44 89 fe bf 0e 00 00 00 e8 20 8e e4 ff e8 5b 91 e4 ff <0f> 0b 45
31 f6 e9 98 02 00 00 41 83 ff 12 74 18 e8 46 91 e4 ff 44
RSP: 0018:ffffc90003cefb40 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: ffff8880259c0000 RSI: ffffffff81968415 RDI: 0000000000000005
RBP: ffff88801270ca00 R08: 0000000000000005 R09: 000000000000000e
R10: 0000000000000011 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000011 R14: ffff888026ee6424 R15: 0000000000000011
FS: 000055555641b300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000f2e258 CR3: 000000007110e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btf_func_proto_check kernel/bpf/btf.c:4447 [inline]
btf_check_all_types kernel/bpf/btf.c:4723 [inline]
btf_parse_type_sec kernel/bpf/btf.c:4752 [inline]
btf_parse kernel/bpf/btf.c:5026 [inline]
btf_new_fd+0x1926/0x1e70 kernel/bpf/btf.c:6892
bpf_btf_load kernel/bpf/syscall.c:4324 [inline]
__sys_bpf+0xb7d/0x4cf0 kernel/bpf/syscall.c:5010
__do_sys_bpf kernel/bpf/syscall.c:5069 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5067 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:5067
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f0fbae41c69
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc8aeb6228 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0fbae41c69
RDX: 0000000000000020 RSI: 0000000020000140 RDI: 0000000000000012
RBP: 00007f0fbae05e10 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000ffffffff R11: 0000000000000246 R12: 00007f0fbae05ea0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Looks like it tries to create a func_proto which return type is
decl_tag. For the details, see Martin's spot on analysis in [0].
0: https://lore.kernel.org/bpf/CAKH8qBuQDLva_hHxxBuZzyAcYNO4ejhovz6TQeVSk8HY-2SO6g@mail.gmail.com/T/#mea6524b3fcd6298347432226e81b1e6155efc62c |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: prevent leak of lsm program after failed attach
In [0], we added the ability to bpf_prog_attach LSM programs to cgroups,
but in our validation to make sure the prog is meant to be attached to
BPF_LSM_CGROUP, we return too early if the check fails. This results in
lack of decrementing prog's refcnt (through bpf_prog_put)
leaving the LSM program alive past the point of the expected lifecycle.
This fix allows for the decrement to take place.
[0] https://lore.kernel.org/all/20220628174314.1216643-4-sdf@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix use after free in mt7921_acpi_read()
Don't dereference "sar_root" after it has been freed. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
An oops can be induced by running 'cat /proc/kcore > /dev/null' on
devices using pstore with the ram backend because kmap_atomic() assumes
lowmem pages are accessible with __va().
Unable to handle kernel paging request at virtual address ffffff807ff2b000
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000
[ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: dm_integrity
CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba
Hardware name: Google Lazor (rev3 - 8) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x110/0x260
lr : vread+0x194/0x294
sp : ffffffc013ee39d0
x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000
x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000
x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000
x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60
x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001
x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b
x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78
x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000
Call trace:
__memcpy+0x110/0x260
read_kcore+0x584/0x778
proc_reg_read+0xb4/0xe4
During early boot, memblock reserves the pages for the ramoops reserved
memory node in DT that would otherwise be part of the direct lowmem
mapping. Pstore's ram backend reuses those reserved pages to change the
memory type (writeback or non-cached) by passing the pages to vmap()
(see pfn_to_page() usage in persistent_ram_vmap() for more details) with
specific flags. When read_kcore() starts iterating over the vmalloc
region, it runs over the virtual address that vmap() returned for
ramoops. In aligned_vread() the virtual address is passed to
vmalloc_to_page() which returns the page struct for the reserved lowmem
area. That lowmem page is passed to kmap_atomic(), which effectively
calls page_to_virt() that assumes a lowmem page struct must be directly
accessible with __va() and friends. These pages are mapped via vmap()
though, and the lowmem mapping was never made, so accessing them via the
lowmem virtual address oopses like above.
Let's side-step this problem by passing VM_IOREMAP to vmap(). This will
tell vread() to not include the ramoops region in the kcore. Instead the
area will look like a bunch of zeros. The alternative is to teach kmap()
about vmalloc areas that intersect with lowmem. Presumably such a change
isn't a one-liner, and there isn't much interest in inspecting the
ramoops region in kcore files anyway, so the most expedient route is
taken for now. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: dio: fix possible memory leak in dio_init()
If device_register() returns error, the 'dev' and name needs be
freed. Add a release function, and then call put_device() in the
error path, so the name is freed in kobject_cleanup() and to the
'dev' is freed in release function. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Check the TLS certificate fields in nfs_match_client()
If the TLS security policy is of type RPC_XPRTSEC_TLS_X509, then the
cert_serial and privkey_serial fields need to match as well since they
define the client's identity, as presented to the server. |
