| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmemmap/devdax: fix kernel crash when probing devdax devices
commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for
compound devmaps") added support for using optimized vmmemap for devdax
devices. But how vmemmap mappings are created are architecture specific.
For example, powerpc with hash translation doesn't have vmemmap mappings
in init_mm page table instead they are bolted table entries in the
hardware page table
vmemmap_populate_compound_pages() used by vmemmap optimization code is not
aware of these architecture-specific mapping. Hence allow architecture to
opt for this feature. I selected architectures supporting
HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature.
This patch fixes the below crash on ppc64.
BUG: Unable to handle kernel data access on write at 0xc00c000100400038
Faulting instruction address: 0xc000000001269d90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a
Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries
NIP: c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000
REGS: c000000003632c30 TRAP: 0300 Not tainted (6.3.0-rc5-150500.34-default+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24842228 XER: 00000000
CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0
....
NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c
LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0
Call Trace:
[c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable)
[c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250
[c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0
[c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0
[c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0
[c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140
[c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520
[c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120
[c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0
[c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130
[c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250
[c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110
[c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10
[c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530
[c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270
[c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70
[c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0
[c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520
[c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120
[c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240
[c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130
[c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50
[c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300
[c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0
[c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100
[c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48
[c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320
[c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400
[c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0
[c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64 |
| A vulnerability has been found in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /admin/edit_user_account.php of the component User Account Update. Such manipulation of the argument id/username leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in vas3k TaxHacker up to 0.8.2. The affected element is the function envSchema.parse of the file lib/config.ts of the component JWT Secret Handler. The manipulation of the argument BETTER_AUTH_SECRET leads to hard-coded credentials. The attack can be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in SourceCodester Stock Management System 1.0. This issue affects some unknown processing of the file /php_action/getOrderReport.php. Performing a manipulation of the argument clientName/clientContact results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been made public and could be used. |
| A vulnerability was detected in sambitraj Student-Management-System up to 56ba287f2e9031523ccb4244cb6e3fe530e4e5d5. Affected by this issue is some unknown functionality of the component Dashboard. The manipulation of the argument roll_no/teacher_name results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| The PPWP – Password Protect Pages plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.9.18 via deserialization of untrusted input from the 'post_protection_roles' vulnerable parameter. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| A weakness has been identified in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /BSIS1.php. Executing a manipulation of the argument course can lead to cross site scripting. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: skip rehash for peers already removed from by_id
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip(). |
| The Infineon Airoc Wi-Fi driver's transmit callback airoc_mgmt_send() in drivers/wifi/infineon/airoc_wifi.c allocates a net_buf from the fixed airoc_pool for every outbound packet. When whd_network_send_ethernet_data() returns a synchronous failure, the underlying WHD library does not take ownership of the buffer, but the pre-fix driver returned -EIO without releasing it. Each failed transmit therefore permanently leaks one buffer from the pool.
airoc_pool is small and fixed (AIROC_WIFI_TX_PACKET_POOL_COUNT + AIROC_WIFI_RX_PACKET_POOL_COUNT, default 20 buffers) and is shared by WHD's whd_host_buffer_get callback for both transmit and receive. Once enough send failures have leaked the pool dry, airoc_wifi_host_buffer_get() returns WHD_BUFFER_ALLOC_FAIL for all subsequent allocations, so both transmit and the WHD-driven receive path fail and Wi-Fi connectivity is lost until the device is rebooted.
The leak occurs only on the transmit error path. A Wi-Fi-adjacent attacker can influence the conditions that cause synchronous send failures (for example by deauthenticating/disassociating the station while the local stack continues to attempt transmits), and ordinary transient failures over the device's lifetime accumulate toward the same state. Reliable on-demand triggering is of high complexity and the impact is availability-only, but the resulting denial of service is permanent and non-recoverable without a reboot.
The fix releases the buffer with airoc_wifi_buffer_release() on the failure branch, returning it to the pool. The commit also removes a redundant k_sem_give() in airoc_mgmt_disconnect(); because data->sema_common is a binary semaphore (limit 1) the duplicate give merely saturated at 1 and had no security impact. |
| A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix netns reference imbalance in conntrack kfuncs
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fw_tracer, return NULL on create error
Tracer creation can fail by returning either NULL or ERR_PTR.
The return value is stored without a check on the device, and users
treat ERR_PTR and NULL the same way.
This also causes a crash in the core dump logic, which is missing the
ERR_PTR check and ends up dereferencing it, as shown in the trace below.
Switch tracer creation to return NULL on failure only, so callers only
need a single NULL check.
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core
CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none)
Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core]
pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core]
lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core]
sp : ffff800081cf3c40
x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000
x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05
x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000
x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0
x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac
x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650
x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8
x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e
Call trace:
mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P)
mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core]
devlink_health_do_dump+0x9c/0x160
devlink_health_report+0x1c0/0x288
mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core]
process_one_work+0x15c/0x3d8
worker_thread+0x18c/0x320
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: b9400000 5ac00800 7a401800 540003ca (3940a260)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x000000,00078031,75fce5a1,35fffe67
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix sk_redir use-after-free in send verdict
sk_psock_msg_verdict() takes a socket reference for psock->sk_redir.
tcp_bpf_send_verdict() copies that pointer while holding the source socket
lock, but does not take a reference for the local copy before dropping the
lock around tcp_bpf_sendmsg_redir().
When apply_bytes keeps the cached verdict active, another sendmsg() on the
same source socket can consume the remaining bytes and release the cached
reference while the first thread still holds only the raw local pointer:
CPU 0 CPU 1
sk_redir = psock->sk_redir
apply_bytes remains nonzero
release_sock(sk)
lock_sock(sk)
apply_bytes reaches zero
psock->sk_redir = NULL
release_sock(sk)
tcp_bpf_sendmsg_redir(sk_redir)
sock_put(sk_redir)
tcp_bpf_sendmsg_redir(sk_redir)
The final sock_put() can free sk_redir before CPU 0 dereferences it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020
Read of size 8 at addr ffff888108537090 by task poc/87
Call Trace:
tcp_bpf_sendmsg_redir+0xf39/0x1020
tcp_bpf_sendmsg+0x977/0x1a50
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 85:
sk_prot_alloc+0x56/0x210
sk_clone+0x6f/0x14b0
inet_csk_clone_lock+0x24/0x740
tcp_create_openreq_child+0x25/0x2710
tcp_v4_syn_recv_sock+0x10a/0xe00
Freed by task 0:
__kasan_slab_free+0x43/0x70
slab_free_after_rcu_debug+0xa6/0x1e0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__sk_destruct+0x3da/0x540
sk_psock_destroy+0x81e/0xab0
process_one_work+0x63a/0x1070
Take a temporary socket reference while the source socket lock still
protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir()
returns. This keeps each unlocked use independent of cached-verdict
ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_dma: Clear stale RX state on shutdown
serial8250_release_dma() terminates RX DMA and releases the channel, but
leaves rx_running set. If the port is closed while an RX transfer is
active, the stale state remains while rxchan is NULL until the channel is
requested again on the next open.
The DesignWare BUSY workaround added by commit a7b9ce39fbe4
("serial: 8250_dw: Ensure BUSY is deasserted") calls
serial8250_rx_dma_flush() from the LCR write path during startup. This
happens before serial8250_request_dma() obtains a new RX channel. On
reopen, the stale rx_running state therefore makes the flush path pass a
NULL channel to dmaengine_pause(), causing a kernel Oops.
Clear rx_running after terminating RX DMA, matching the TX cleanup. Also
make the flush helper return if the DMA object or RX channel is not
available so startup and teardown paths cannot pass a NULL channel to the
DMAengine API. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix netdev use-after-free in beacon worker
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
