| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix NULL pointer dereference when reading portli debugfs files
Michal reported and debgged a NULL pointer dereference bug in the
recently added portli debugfs files
Oops is caused when there are more port registers counted in
xhci->max_ports than ports reported by Supported Protocol capabilities.
This is possible if max_ports is more than maximum port number, or
if there are gaps between ports of different speeds the 'Supported
Protocol' capabilities.
In such cases port->rhub will be NULL so we can't reach xhci behind it.
Add an explicit NULL check for this case, and print portli in hex
without dereferencing port->rhub. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
======================================================================= |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: reject FRMR registration before IB connection is established
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data
and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a
fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with
i_cm_id = NULL because the connection worker has not yet called
rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with
RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses
the control message before any connection establishment, allowing
rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the
kernel.
The existing guard in rds_ib_reg_frmr() only checks for !ic (added in
commit 9e630bcb7701), which does not catch this case since ic is allocated
early and is always non-NULL once the connection object exists.
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920
Call Trace:
rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167)
rds_ib_map_frmr (net/rds/ib_frmr.c:252)
rds_ib_reg_frmr (net/rds/ib_frmr.c:430)
rds_ib_get_mr (net/rds/ib_rdma.c:615)
__rds_rdma_map (net/rds/rdma.c:295)
rds_cmsg_rdma_map (net/rds/rdma.c:860)
rds_sendmsg (net/rds/send.c:1363)
____sys_sendmsg
do_syscall_64
Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all
non-NULL before proceeding with FRMR registration, mirroring the guard
already present in rds_ib_post_inv(). Return -ENODEV when the connection
is not ready, which the existing error handling in rds_cmsg_send() converts
to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to
start the connection worker. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix crash due to unvalidated vcc pointer in sigd_send()
Reproducer available at [1].
The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc
pointer from msg->vcc and uses it directly without any validation. This
pointer comes from userspace via sendmsg() and can be arbitrarily forged:
int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0);
ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon
struct msghdr msg = { .msg_iov = &iov, ... };
*(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer
sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef
In normal operation, the kernel sends the vcc pointer to the signaling
daemon via sigd_enq() when processing operations like connect(), bind(),
or listen(). The daemon is expected to return the same pointer when
responding. However, a malicious daemon can send arbitrary pointer values.
Fix this by introducing find_get_vcc() which validates the pointer by
searching through vcc_hash (similar to how sigd_close() iterates over
all VCCs), and acquires a reference via sock_hold() if found.
Since struct atm_vcc embeds struct sock as its first member, they share
the same lifetime. Therefore using sock_hold/sock_put is sufficient to
keep the vcc alive while it is being used.
Note that there may be a race with sigd_close() which could mark the vcc
with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns.
However, sock_hold() guarantees the memory remains valid, so this race
only affects the logical state, not memory safety.
[1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix statistics allocation
The controller per-cpu statistics is not allocated until after the
controller has been registered with driver core, which leaves a window
where accessing the sysfs attributes can trigger a NULL-pointer
dereference.
Fix this by moving the statistics allocation to controller allocation
while tying its lifetime to that of the controller (rather than using
implicit devres). |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter] |
| libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and below, a crafted 792-byte HEIF sequence file with samples_per_chunk=0 in the stsc box causes an unsigned integer underflow in the Chunk constructor (m_last_sample = 0 + 0 - 1 = UINT32_MAX), mapping all samples to an empty chunk and resulting in a denial of service. When any sample is accessed, the library reads from index 0 of an empty std::vector, causing a guaranteed SEGV (null-page read). The file parses successfully without producing an error; the crash occurs on the first frame access. This issue has been fixed in version 1.22.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd()
move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge
zero pages. For the huge zero page path, src_folio is explicitly set to
NULL, and is used as a sentinel to skip folio operations like lock and
rmap.
In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL,
pgprot) passes NULL through folio_pfn() and page_to_pfn(). With
SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD
pointing to non-existent physical memory. On other memory models it is a
NULL dereference.
Use page_folio(src_page) to obtain the valid huge zero folio from the
page, which was obtained from pmd_page() and remains valid throughout.
After commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge
zero folio special"), moved huge zero PMDs must remain special so
vm_normal_page_pmd() continues to treat them as special mappings.
move_pages_huge_pmd() currently reconstructs the destination PMD in the
huge zero page branch, which drops PMD state such as pmd_special() on
architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result,
vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page
and corrupt its refcount.
Instead of reconstructing the PMD from the folio, derive the destination
entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD
metadata the same way move_huge_pmd() does for moved entries by marking it
soft-dirty and clearing uffd-wp. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc()
At the end of this function, d is the traversal cursor of flist, but the
code completes found instead. This can lead to issues such as NULL pointer
dereferences, double completion, or descriptor leaks.
Fix this by completing d instead of found in the final
list_for_each_entry_safe() loop. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators
When a process crashes and the kernel writes a core dump to a 9P
filesystem, __kernel_write() creates an ITER_KVEC iterator. This
iterator reaches netfs_limit_iter() via netfs_unbuffered_write(), which
only handles ITER_FOLIOQ, ITER_BVEC and ITER_XARRAY iterator types,
hitting the BUG() for any other type.
Fix this by adding netfs_limit_kvec() following the same pattern as
netfs_limit_bvec(), since both kvec and bvec are simple segment arrays
with pointer and length fields. Dispatch it from netfs_limit_iter() when
the iterator type is ITER_KVEC. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In versions 0.24.10 and below, when NanoMQ handles high-concurrency reconnect traffic using a reconnect-collision payload, the broker can crash due to a NULL pointer dereference during MQTT session resumption for clean_start=0 clients. The transport's p_peer callback (tcptran_pipe_peer()) iterates cpipe->subinfol while copying session metadata from the cached old pipe to the new reconnecting pipe, without checking whether the pointer is NULL. Under a reconnect race, cpipe->subinfol can be freed and set to NULL before session restore invokes this function, resulting in a remote unauthenticated Denial-of-Service (process crash) condition. This issue has been fixed in version 0.24.11. |
| A security vulnerability has been detected in Telegram Desktop up to 6.7.5. This vulnerability affects the function RequestButton of the file Telegram/SourceFiles/boxes/url_auth_box.cpp of the component Bot API. The manipulation of the argument login_url leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. There is ongoing doubt regarding the real existence of this vulnerability. Upgrading to version 6.7.6 is able to resolve this issue. Upgrading the affected component is recommended. The vendor provides this rationale for the dispute: "[T]he described scenario does not lead to any security issue or vulnerability, and only causes a one-time crash. In the outlined scenario, the targeted user must perform an active action, which doesn't produce any consequences after the app is relaunched." |
| A flaw was found in libssh in which a malicious SFTP (SSH File Transfer Protocol) server can exploit this by sending a malformed 'longname' field within an `SSH_FXP_NAME` message during a file listing operation. This missing null check can lead to reading beyond allocated memory on the heap. This can cause unexpected behavior or lead to a denial of service (DoS) due to application crashes. |
| in OpenHarmony v6.0 and prior versions allow a local attacker cause DOS. |
| NetBSD prior to commit ec8451e contains a signed integer overflow vulnerability in the cryptodev_op() function in sys/opencrypto/cryptodev.c where the local variable iov_len is declared as a signed int but assigned from an unsigned cop->dst_len value, causing undefined behavior when cop->dst_len exceeds INT_MAX. A local attacker with access to /dev/crypto and a compression session type can exploit this vulnerability by providing a dst_len value exceeding INT_MAX to trigger a kernel panic through NULL pointer dereference when CONFIG_SVS is disabled and corrupted UIO pointer arithmetic. |
| A weakness has been identified in omec-project amf up to 2.1.3-dev. This affects an unknown function of the file ngap/handler.go of the component NGAP Message Handler. This manipulation causes null pointer dereference. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. Upgrading to version 2.2.0 mitigates this issue. It is recommended to upgrade the affected component. The same pull request fixes multiple security issues. |
| A security vulnerability has been detected in omec-project amf up to 2.1.3-dev. This impacts the function UERadioCapabilityCheckResponse of the file ngap/dispatcher.go. Such manipulation leads to null pointer dereference. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 2.2.0 will fix this issue. Upgrading the affected component is advised. The same pull request fixes multiple security issues. |
| ### Summary
`qs.stringify` throws `TypeError` when called with `arrayFormat: 'comma'` and `encodeValuesOnly: true` on an array containing `null` or `undefined`. The throw is synchronous and not handled by any of qs's null-related options (`skipNulls`, `strictNullHandling`).
### Details
In the comma + `encodeValuesOnly` branch, `lib/stringify.js:145` mapped the array through the raw encoder before joining:
```js
obj = utils.maybeMap(obj, encoder);
```
`utils.encode` (`lib/utils.js:195`) reads `str.length` with no null guard, so a `null` or `undefined` element throws `TypeError`. `skipNulls` and `strictNullHandling` are both checked in the per-element loop below this line and never get a chance to run.
Same class of bug as the filter-array path fixed in 0c180a4. The vulnerable shape of the comma + `encodeValuesOnly` branch was introduced in 4c4b23d ("encode comma values more consistently", PR #463, 2023-01-19), first released in v6.11.1.
#### PoC
```js
const qs = require('qs');
qs.stringify({ a: [null, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true });
qs.stringify({ a: [undefined, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true });
qs.stringify({ a: [null] }, { arrayFormat: 'comma', encodeValuesOnly: true });
// TypeError: Cannot read properties of null (reading 'length')
// at encode (lib/utils.js:195:13)
// at Object.maybeMap (lib/utils.js:322:37)
// at stringify (lib/stringify.js:145:25)
```
#### Fix
`lib/stringify.js:145`, applied in 21f80b3 on `main` and released as v6.15.2:
```diff
- obj = utils.maybeMap(obj, encoder);
+ obj = utils.maybeMap(obj, function (v) {
+ return v == null ? v : encoder(v);
+ });
```
`null` and `undefined` now pass through `maybeMap` unchanged and reach the `join(',')` step as-is. For `{ a: [null, 'b'] }` this produces `a=,b`, matching the non-`encodeValuesOnly` comma path (which already joins before encoding and produces `a=%2Cb` for the same input). Single-element `[null]` arrays still collapse via the existing `obj.join(',') || null` and remain subject to `skipNulls` / `strictNullHandling` in the main loop.
### Affected versions
`>=6.11.1 <6.15.2` — fixed in v6.15.2.
The vulnerable code shape was introduced in 4c4b23d and first shipped in v6.11.1. Earlier versions — including all of 6.7.x, 6.8.x, 6.9.x, 6.10.x, and 6.11.0 — implemented the comma + `encodeValuesOnly` path differently (joining before encoding) and are not affected. Empirically verified across released versions.
### Impact
Application code that calls `qs.stringify` with both `arrayFormat: 'comma'` and `encodeValuesOnly: true` (both non-default) on input that may contain a `null` or `undefined` array element will throw synchronously instead of producing a query string. In a typical Node.js HTTP framework (Express, Fastify, Koa, hapi) the sync throw is caught by the framework's error boundary and the affected request returns a 500; the worker process does not exit and subsequent requests are unaffected. The "kills the worker process" framing applies only to call sites outside a request-handler error boundary (background jobs, startup paths, stream pipelines) or to deployments with framework error handling explicitly disabled.
The vulnerable input is a `null` or `undefined` entry inside an array; this is reachable from JSON request bodies or from application code constructing arrays from user input, but not from standard HTML form submissions (which produce strings or omitted fields, not literal `null`). |
