| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix memory leak with CCA cards used as accelerator
Tests showed that there is a memory leak if CCA cards are used as
accelerator for clear key RSA requests (ME and CRT). With the last
rework for the memory allocation the AP messages are allocated by
ap_init_apmsg() but for some reason on two places (ME and CRT) the
older allocation was still in place. So the first allocation simple
was never freed. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me4000: Fix potential overrun of firmware buffer
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmware loading was totally broken before commit ac584af59945
("staging: comedi: me4000: fix firmware downloading"), but that is the
most sensible target for this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`. |
| A cross-site scripting (XSS) vulnerability in the wff_cols_pref.css.aspx endpoint of staffwiki v7.0.1.19219 allows attackers to execute arbitrary Javascript in the context of the user's browser via a crafted HTTP request. |
| An issue pertaining to CWE-79: Improper Neutralization of Input During Web Page Generation was discovered in benkeen generatedata 4.0.14. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix drm_edid leak in amdgpu_dm
[WHAT]
When a sink is connected, aconnector->drm_edid was overwritten without
freeing the previous allocation, causing a memory leak on resume.
[HOW]
Free the previous drm_edid before updating it.
(cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5) |
| Memory safety bugs present in Thunderbird ESR 140.10.0 and Thunderbird 150.0.0. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.1, Firefox ESR 140.10.1, Firefox ESR 115.35.1, Thunderbird 150.0.1, and Thunderbird 140.10.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Drain commands in target_reset handler
tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS
without draining any in-flight commands. The SCSI EH documentation
(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver
has made lower layers "forget about timed out scmds" and is ready for new
commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,
mpi3mr) enforces this by draining or completing outstanding commands before
returning SUCCESS.
Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight
scsi_cmnd structures for recovery commands (e.g. TUR) while the target core
still has async completion work queued for the old se_cmd. The memset in
queuecommand zeroes se_lun and lun_ref_active, causing
transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN
reference prevents transport_clear_lun_ref() from completing, hanging
configfs LUN unlink forever in D-state:
INFO: task rm:264 blocked for more than 122 seconds.
rm D 0 264 258 0x00004000
Call Trace:
__schedule+0x3d0/0x8e0
schedule+0x36/0xf0
transport_clear_lun_ref+0x78/0x90 [target_core_mod]
core_tpg_remove_lun+0x28/0xb0 [target_core_mod]
target_fabric_port_unlink+0x50/0x60 [target_core_mod]
configfs_unlink+0x156/0x1f0 [configfs]
vfs_unlink+0x109/0x290
do_unlinkat+0x1d5/0x2d0
Fix this by making tcm_loop_target_reset() actually drain commands:
1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that
the target core knows about (those not yet CMD_T_COMPLETE).
2. Use blk_mq_tagset_busy_iter() to iterate all started requests and
flush_work() on each se_cmd — this drains any deferred completion work
for commands that already had CMD_T_COMPLETE set before the TMR (which
the TMR skips via __target_check_io_state()). This is the same pattern
used by mpi3mr, scsi_debug, and libsas to drain outstanding commands
during reset. |
| Cross-site Scripting (XSS) allows an attacker to submit specially crafted data to the application which is returned unaltered in the resulting web page. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to access files and execute commands on a remote router.
This vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to create, read, or delete files and execute limited commands in user EXEC mode on a remote router. |
| Versions of the package spin.js before 3.0.0 are vulnerable to Cross-site Scripting (XSS) via the spin() function that allows a creation of more than 1 alert for each 'target' element. An attacker would need to set an arbitrary key-value pair on Object.prototype through a crafted URL achieving a prototype pollution first, before being able to execute arbitrary JavaScript in the context of the user's browser. |
| A Cross-Site Scripting (XSS) vulnerability was found in PHPGurukal Hospital Management System v4.0 in the /hospital/hms/edit-profile.php page. This flaw allows an authenticated attacker (patient) to inject a malicious script payload into the User Name parameter, which is stored in the application and later rendered in the doctor s interface. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| Memory safety bugs present in Thunderbird ESR 140.10.0 and Thunderbird 150.0.0. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.1, Firefox ESR 140.10.1, Thunderbird 150.0.1, and Thunderbird 140.10.1. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
Validate host controlled value `quote_buf->out_len` that determines how
many bytes of the quote are copied out to guest userspace. In TDX
environments with remote attestation, quotes are not considered private,
and can be forwarded to an attestation server.
Catch scenarios where the host specifies a response length larger than
the guest's allocation, or otherwise races modifying the response while
the guest consumes it.
This prevents contents beyond the pages allocated for `quote_buf`
(up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace,
and possibly forwarded in attestation requests.
Recall that some deployments want per-container configs-tsm-report
interfaces, so the leak may cross container protection boundaries, not
just local root. |
| Out of bounds write in Media in Google Chrome on Mac, iOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
@p->scx.ddsp_dsq_id can be left set (non-SCX_DSQ_INVALID) triggering a
spurious warning in mark_direct_dispatch() when the next wakeup's
ops.select_cpu() calls scx_bpf_dsq_insert(), such as:
WARNING: kernel/sched/ext.c:1273 at scx_dsq_insert_commit+0xcd/0x140
The root cause is that ddsp_dsq_id was only cleared in dispatch_enqueue(),
which is not reached in all paths that consume or cancel a direct dispatch
verdict.
Fix it by clearing it at the right places:
- direct_dispatch(): cache the direct dispatch state in local variables
and clear it before dispatch_enqueue() on the synchronous path. For
the deferred path, the direct dispatch state must remain set until
process_ddsp_deferred_locals() consumes them.
- process_ddsp_deferred_locals(): cache the dispatch state in local
variables and clear it before calling dispatch_to_local_dsq(), which
may migrate the task to another rq.
- do_enqueue_task(): clear the dispatch state on the enqueue path
(local/global/bypass fallbacks), where the direct dispatch verdict is
ignored.
- dequeue_task_scx(): clear the dispatch state after dispatch_dequeue()
to handle both the deferred dispatch cancellation and the holding_cpu
race, covering all cases where a pending direct dispatch is
cancelled.
- scx_disable_task(): clear the direct dispatch state when
transitioning a task out of the current scheduler. Waking tasks may
have had the direct dispatch state set by the outgoing scheduler's
ops.select_cpu() and then been queued on a wake_list via
ttwu_queue_wakelist(), when SCX_OPS_ALLOW_QUEUED_WAKEUP is set. Such
tasks are not on the runqueue and are not iterated by scx_bypass(),
so their direct dispatch state won't be cleared. Without this clear,
any subsequent SCX scheduler that tries to direct dispatch the task
will trigger the WARN_ON_ONCE() in mark_direct_dispatch(). |
| Memory safety bugs present in Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150 and Thunderbird 150. |
