| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix unexpected zeroed page mapping with zram swap
Two processes under CLONE_VM cloning, user process can be corrupted by
seeing zeroed page unexpectedly.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage valid data
swap_slot_free_notify
delete zram entry
swap_readpage zeroed(invalid) data
pte_lock
map the *zero data* to userspace
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return and next refault will
read zeroed data
The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't
increase the refcount of swap slot at copy_mm so it couldn't catch up
whether it's safe or not to discard data from backing device. In the
case, only the lock it could rely on to synchronize swap slot freeing is
page table lock. Thus, this patch gets rid of the swap_slot_free_notify
function. With this patch, CPU A will see correct data.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage original data
pte_lock
map the original data
swap_free
swap_range_free
bd_disk->fops->swap_slot_free_notify
swap_readpage read zeroed data
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return
on next refault will see mapped data by CPU B
The concern of the patch would increase memory consumption since it
could keep wasted memory with compressed form in zram as well as
uncompressed form in address space. However, most of cases of zram uses
no readahead and do_swap_page is followed by swap_free so it will free
the compressed form from in zram quickly. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Avoid consuming a stale esr value when SError occur
When any exception other than an IRQ occurs, the CPU updates the ESR_EL2
register with the exception syndrome. An SError may also become pending,
and will be synchronised by KVM. KVM notes the exception type, and whether
an SError was synchronised in exit_code.
When an exception other than an IRQ occurs, fixup_guest_exit() updates
vcpu->arch.fault.esr_el2 from the hardware register. When an SError was
synchronised, the vcpu esr value is used to determine if the exception
was due to an HVC. If so, ELR_EL2 is moved back one instruction. This
is so that KVM can process the SError first, and re-execute the HVC if
the guest survives the SError.
But if an IRQ synchronises an SError, the vcpu's esr value is stale.
If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2,
causing an unrelated guest instruction to be executed twice.
Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't
update this register so don't need to check. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Forward wakeup to smc socket waitqueue after fallback
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.
After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.
The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:
general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107
RIP: 0010:__wake_up_common+0x65/0x170
Call Trace:
<IRQ>
__wake_up_common_lock+0x7a/0xc0
sock_def_readable+0x3c/0x70
tcp_data_queue+0x4a7/0xc40
tcp_rcv_established+0x32f/0x660
? sk_filter_trim_cap+0xcb/0x2e0
tcp_v4_do_rcv+0x10b/0x260
tcp_v4_rcv+0xd2a/0xde0
ip_protocol_deliver_rcu+0x3b/0x1d0
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0x6a/0x110
? tcp_v4_early_demux+0xa2/0x140
? tcp_v4_early_demux+0x10d/0x140
ip_sublist_rcv_finish+0x49/0x60
ip_sublist_rcv+0x19d/0x230
ip_list_rcv+0x13e/0x170
__netif_receive_skb_list_core+0x1c2/0x240
netif_receive_skb_list_internal+0x1e6/0x320
napi_complete_done+0x11d/0x190
mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
__napi_poll+0x3c/0x1b0
net_rx_action+0x27c/0x300
__do_softirq+0x114/0x2d2
irq_exit_rcu+0xb4/0xe0
common_interrupt+0xba/0xe0
</IRQ>
<TASK>
The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.
This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find()
nf_osf_find() incorrectly returns true on mismatch, this leads to
copying uninitialized memory area in nft_osf which can be used to leak
stale kernel stack data to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - ensure buffer for generate is completely filled
The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:
kcapi-rng -b 9000000 > OUTFILE
The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.
Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.
Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:
$ ent -c qcom-random-before
Value Char Occurrences Fraction
0 606748 0.067416
1 33104 0.003678
2 33001 0.003667
...
253 � 32883 0.003654
254 � 33035 0.003671
255 � 33239 0.003693
Total: 9000000 1.000000
Entropy = 7.811590 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 2 percent.
Chi square distribution for 9000000 samples is 9329962.81, and
randomly would exceed this value less than 0.01 percent of the
times.
Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
Serial correlation coefficient is 0.159130 (totally uncorrelated =
0.0).
Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:
$ ent -c qcom-random-after
Value Char Occurrences Fraction
0 35432 0.003937
1 35127 0.003903
2 35424 0.003936
...
253 � 35201 0.003911
254 � 34835 0.003871
255 � 35368 0.003930
Total: 9000000 1.000000
Entropy = 7.999979 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 0 percent.
Chi square distribution for 9000000 samples is 258.77, and randomly
would exceed this value 42.24 percent of the times.
Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
Serial correlation coefficient is 0.000468 (totally uncorrelated =
0.0).
This change was tested on a Nexus 5 phone (msm8974 SoC). |
| In the Linux kernel, the following vulnerability has been resolved:
sit: do not call ipip6_dev_free() from sit_init_net()
ipip6_dev_free is sit dev->priv_destructor, already called
by register_netdevice() if something goes wrong.
Alternative would be to make ipip6_dev_free() robust against
multiple invocations, but other drivers do not implement this
strategy.
syzbot reported:
dst_release underflow
WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173
Modules linked in:
CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173
Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48
RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246
RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000
RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c
R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358
R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000
FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160
ipip6_dev_free net/ipv6/sit.c:1414 [inline]
sit_init_net+0x229/0x550 net/ipv6/sit.c:1936
ops_init+0x313/0x430 net/core/net_namespace.c:140
setup_net+0x35b/0x9d0 net/core/net_namespace.c:326
copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470
create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226
ksys_unshare+0x57d/0xb50 kernel/fork.c:3075
__do_sys_unshare kernel/fork.c:3146 [inline]
__se_sys_unshare kernel/fork.c:3144 [inline]
__x64_sys_unshare+0x34/0x40 kernel/fork.c:3144
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f66c882ce99
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200
RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: fix underflow for the real_dev refcnt
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd934x: handle channel mappping list correctly
Currently each channel is added as list to dai channel list, however
there is danger of adding same channel to multiple dai channel list
which endups corrupting the other list where its already added.
This patch ensures that the channel is actually free before adding to
the dai channel list and also ensures that the channel is on the list
before deleting it.
This check was missing previously, and we did not hit this issue as
we were testing very simple usecases with sequence of amixer commands. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value
Currently, when the rule related to IDLETIMER is added, idletimer_tg timer
structure is initialized by kmalloc on executing idletimer_tg_create
function. However, in this process timer->timer_type is not defined to
a specific value. Thus, timer->timer_type has garbage value and it occurs
kernel panic. So, this commit fixes the panic by initializing
timer->timer_type using kzalloc instead of kmalloc.
Test commands:
# iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test
$ cat /sys/class/xt_idletimer/timers/test
Killed
Splat looks like:
BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70
Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917
CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
dump_stack_lvl+0x6e/0x9c
kasan_report.cold+0x112/0x117
? alarm_expires_remaining+0x49/0x70
__asan_load8+0x86/0xb0
alarm_expires_remaining+0x49/0x70
idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d]
dev_attr_show+0x3c/0x60
sysfs_kf_seq_show+0x11d/0x1f0
? device_remove_bin_file+0x20/0x20
kernfs_seq_show+0xa4/0xb0
seq_read_iter+0x29c/0x750
kernfs_fop_read_iter+0x25a/0x2c0
? __fsnotify_parent+0x3d1/0x570
? iov_iter_init+0x70/0x90
new_sync_read+0x2a7/0x3d0
? __x64_sys_llseek+0x230/0x230
? rw_verify_area+0x81/0x150
vfs_read+0x17b/0x240
ksys_read+0xd9/0x180
? vfs_write+0x460/0x460
? do_syscall_64+0x16/0xc0
? lockdep_hardirqs_on+0x79/0x120
__x64_sys_read+0x43/0x50
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f0cdc819142
Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142
RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003
RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000
R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix host stage-2 PGD refcount
The KVM page-table library refcounts the pages of concatenated stage-2
PGDs individually. However, when running KVM in protected mode, the
host's stage-2 PGD is currently managed by EL2 as a single high-order
compound page, which can cause the refcount of the tail pages to reach 0
when they shouldn't, hence corrupting the page-table.
Fix this by introducing a new hyp_split_page() helper in the EL2 page
allocator (matching the kernel's split_page() function), and make use of
it from host_s2_zalloc_pages_exact(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a4xx: fix error handling in a4xx_gpu_init()
This code returns 1 on error instead of a negative error. It leads to
an Oops in the caller. A second problem is that the check for
"if (ret != -ENODATA)" cannot be true because "ret" is set to 1. |
| In the Linux kernel, the following vulnerability has been resolved:
enetc: Fix illegal access when reading affinity_hint
irq_set_affinity_hit() stores a reference to the cpumask_t
parameter in the irq descriptor, and that reference can be
accessed later from irq_affinity_hint_proc_show(). Since
the cpu_mask parameter passed to irq_set_affinity_hit() has
only temporary storage (it's on the stack memory), later
accesses to it are illegal. Thus reads from the corresponding
procfs affinity_hint file can result in paging request oops.
The issue is fixed by the get_cpu_mask() helper, which provides
a permanent storage for the cpumask_t parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and
Linux's afs client switches between them when talking to a non-YFS server
if the read size, the file position or the sum of the two have the upper 32
bits set of the 64-bit value.
This is a problem, however, since the file position and length fields of
FS.FetchData are *signed* 32-bit values.
Fix this by capturing the capability bits obtained from the fileserver when
it's sent an FS.GetCapabilities RPC, rather than just discarding them, and
then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be
used to decide whether to use FS.FetchData or FS.FetchData64 - and also
FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to
switch on the parameter values.
This capabilities flag could also be used to limit the maximum size of the
file, but all servers must be checked for that.
Note that the issue does not exist with FS.StoreData - that uses *unsigned*
32-bit values. It's also not a problem with Auristor servers as its
YFS.FetchData64 op uses unsigned 64-bit values.
This can be tested by cloning a git repo through an OpenAFS client to an
OpenAFS server and then doing "git status" on it from a Linux afs
client[1]. Provided the clone has a pack file that's in the 2G-4G range,
the git status will show errors like:
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
This can be observed in the server's FileLog with something like the
following appearing:
Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001
Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866
...
Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5
Note the file position of 18446744071815340032. This is the requested file
position sign-extended. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Avoid data corruptions
Wait for all dependencies of a job to complete before
killing it to avoid data corruptions. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/bpf: Fix detecting BPF atomic instructions
Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other
atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to
distinguish instructions based on the immediate field. Existing JIT
implementations were updated to check for the immediate field and to
reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH)
in the immediate field.
However, the check added to powerpc64 JIT did not look at the correct
BPF instruction. Due to this, such programs would be accepted and
incorrectly JIT'ed resulting in soft lockups, as seen with the atomic
bounds test. Fix this by looking at the correct immediate value. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
vcpu_put is not called if the user copy fails. This can result in preempt
notifier corruption and crashes, among other issues. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Avoid smp_processor_id() in preemptible code
The BUG message "BUG: using smp_processor_id() in preemptible [00000000]
code" was observed for TCMU devices with kernel config DEBUG_PREEMPT.
The message was observed when blktests block/005 was run on TCMU devices
with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7
("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the
symptom. The commit modified work queue to handle commands and changed
'current->nr_cpu_allowed' at smp_processor_id() call.
The message was also observed at system shutdown when TCMU devices were not
cleaned up [2]. The function smp_processor_id() was called in SCSI host
work queue for abort handling, and triggered the BUG message. This symptom
was observed regardless of the commit 1130b499b4a7 ("scsi: target:
tcm_loop: Use LIO wq cmd submission helper").
To avoid the preemptible code check at smp_processor_id(), get CPU ID with
raw_smp_processor_id() instead. The CPU ID is used for performance
improvement then thread move to other CPU will not affect the code.
[1]
[ 56.468103] run blktests block/005 at 2021-05-12 14:16:38
[ 57.369473] check_preemption_disabled: 85 callbacks suppressed
[ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511
[ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510
[ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506
[ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34
[ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 57.369617] Call Trace:
[ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507
[ 57.369628] dump_stack+0x6d/0x89
[ 57.369642] check_preemption_disabled+0xc8/0xd0
[ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod]
[ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop]
[ 57.369744] scsi_queue_rq+0x38e/0xc40
[ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0
[ 57.369779] blk_mq_try_issue_directly+0x43/0x90
[ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0
[ 57.369812] submit_bio_noacct+0x46e/0x4e0
[ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0
[ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60
[ 57.369880] generic_file_read_iter+0x89/0x160
[ 57.369898] blkdev_read_iter+0x44/0x60
[ 57.369906] new_sync_read+0x102/0x170
[ 57.369929] vfs_read+0xd4/0x160
[ 57.369941] __x64_sys_pread64+0x6e/0xa0
[ 57.369946] ? lockdep_hardirqs_on+0x79/0x100
[ 57.369958] do_syscall_64+0x3a/0x70
[ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 57.369973] RIP: 0033:0x7f7ed4c1399f
[ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b
[ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
[ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f
[ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009
[ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001
[ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70
[ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568
[ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34
[ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 57.370039] Call Trace:
[ 57.370045] dump_stack+0x6d/0x89
[ 57.370056] ch
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix an incorrect limit in filelayout_decode_layout()
The "sizeof(struct nfs_fh)" is two bytes too large and could lead to
memory corruption. It should be NFS_MAXFHSIZE because that's the size
of the ->data[] buffer.
I reversed the size of the arguments to put the variable on the left. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: wait and exit until all work queues are done
On some host, a crash could be triggered simply by repeating these
commands several times:
# modprobe tipc
# tipc bearer enable media udp name UDP1 localip 127.0.0.1
# rmmod tipc
[] BUG: unable to handle kernel paging request at ffffffffc096bb00
[] Workqueue: events 0xffffffffc096bb00
[] Call Trace:
[] ? process_one_work+0x1a7/0x360
[] ? worker_thread+0x30/0x390
[] ? create_worker+0x1a0/0x1a0
[] ? kthread+0x116/0x130
[] ? kthread_flush_work_fn+0x10/0x10
[] ? ret_from_fork+0x35/0x40
When removing the TIPC module, the UDP tunnel sock will be delayed to
release in a work queue as sock_release() can't be done in rtnl_lock().
If the work queue is schedule to run after the TIPC module is removed,
kernel will crash as the work queue function cleanup_beareri() code no
longer exists when trying to invoke it.
To fix it, this patch introduce a member wq_count in tipc_net to track
the numbers of work queues in schedule, and wait and exit until all
work queues are done in tipc_exit_net(). |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix data stream corruption
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat) |
