| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: fix ignored return value of generic_write_sync()
Fix ext2_dio_write_iter() to propagate the error returned by
generic_write_sync() instead of silently discarding it, which could
cause write(2) to return success to userspace on O_SYNC/O_DSYNC files
even when the sync failed.
The correct pattern, already used in ext2_dax_write_iter() in the same
file and in ext4, xfs, f2fs among others, is:
if (ret > 0)
ret = generic_write_sync(iocb, ret);
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[JK: Reflect also filemap_write_and_wait() return value] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will
be executed even though codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a wild
memory access when qfq has codel as a child:
[ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full)
[ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216
[ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000
[ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000
[ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024
[ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000
[ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578
[ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000
[ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0
[ 36.344359][ T370] PKRU: 55555554
[ 36.344481][ T370] Call Trace:
...
[ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057)
[ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
In iommu_dma_map_sg(), when handling PCI P2PDMA cases, the DMA length
of the current scatterlist segment `s` is incorrectly assigned from the
head entry `sg->length` instead of the current entry `s->length`.
This typo causes all P2PDMA segments in the scatterlist to inherit the
length of the first segment, leading to corrupted DMA lengths for multi-
segment scatterlists.
Fix this by using `s->length` instead of `sg->length`. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: reject inverted service ranges from peer bindings
tipc_update_nametbl() inserts a binding advertised by a peer node using
the lower and upper service-range bounds taken directly from the wire,
without checking that lower <= upper. The local bind path validates the
ordering (tipc_uaddr_valid()), but the name-distribution path does not.
A binding with lower > upper is inserted at the far end of the
service-range rbtree (keyed on lower) where no lookup or withdrawal can
ever match it (service_range_foreach_match() requires sr->lower <= end).
The publication, its service_range node and the augmented rbtree entry
are then leaked for the lifetime of the namespace, and there is no
per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings.
Reject inverted ranges in the network path as well. A peer node can
otherwise leak unbounded binding-table memory by sending PUBLICATION
items with lower > upper. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't ignore error route in local/main tables.
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: avoid stale FIFO cells during resize
snd_seq_fifo_resize() still needs to publish the replacement pool
before it waits for FIFO users. A blocking snd_seq_read() holds
f->use_lock while it sleeps, so concurrent senders must be able to
queue to the new pool and wake that reader instead of failing against a
closing old pool.
However, snd_seq_fifo_event_in() duplicates an event before it takes
f->lock, and snd_seq_read() can dequeue a cell and later call
snd_seq_fifo_cell_putback() if copy_to_user() or
snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches
oldhead in between, either path can relink an old-pool cell after the
snapshot. That stale cell sits outside the drained oldhead list, keeps
oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting
for the retired pool to drain.
Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(),
but reject stale cells before any FIFO relink. Revalidate event-in cells
under f->lock and retry them against the published replacement pool, and
free stale putback cells instead of linking them back into the FIFO.
The buggy scenario involves two paths, with each column showing the
order within that path:
resize path: relink path:
1. Allocate newpool. 1. Take f->use_lock.
2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool
detach oldhead. cell before oldpool closes.
3. Mark oldpool closing and 3. Reach a later relink point after
wait for FIFO users. resize published newpool.
4. Free oldhead and delete 4. Relink the old-pool cell after
oldpool. resize detached oldhead.
5. Drop f->use_lock.
The reproducer reports a resize ioctl blocked in the expected pool
teardown path:
signal: resize iteration=98 target_pool=4 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=651 wchan=snd_seq_pool_done
diagnostic: resize_tid=651 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
A second run with larger pools hit the same target path:
signal: resize iteration=32 target_pool=64 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=663 wchan=snd_seq_pool_done
diagnostic: resize_tid=663 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix callback service message parsers to pass through -EAGAIN
The AFS filesystem client uses an rxrpc server to listen for callback
notifications. Each callback call type handler has a delivery function
that parses the incoming request stream, and this should return -EAGAIN the
last packet hasn't yet been seen, but all currently queued received data is
consumed. afs_extract_data() does this, but the -EAGAIN return is switched
to 0 inadvertantly
Fix callback service message parsers to pass through -EAGAIN |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix passing events to regulator core
Sashiko reports:
Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: prevent connlimit drops for early confirmed ct
Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add
was skipped") introduced a regression where packets for valid
connections are dropped when using connlimit for soft-limiting
scenarios.
The issue occurs when a new connection reuses a socket currently in
the TIME_WAIT state. In this scenario, the connection tracking entry
is evaluated as already confirmed. Previously, __nf_conncount_add()
assumed that if a connection was confirmed and did not originate from
the loopback interface, it should skip the addition and return -EEXIST.
Skipping the addition triggers a garbage collection run that cleans up
the TIME_WAIT connection. Consequently, the active connection count
drops to 0, which xt_connlimit mishandles, leading to the false rejection
of the perfectly valid new connection.
Fix this by replacing the interface check with protocol-agnostic state
checks. We now skip the tree insertion and preserve the lockless garbage
collection optimization only if the connection is IPS_ASSURED. This
allows early-confirmed setup packets (such as reused TIME_WAIT sockets
or locally generated SYN-ACKs) to be properly evaluated and counted
without falsely dropping. The goto check_connections path is maintained
to ensure these setup packets are deduplicated correctly.
This has been tested with slowhttptest and HTTP server configured
locally to ensure we are not breaking soft-limiting scenarios for local
or external connections. In addition, it was tested with a OVS zone
limit too. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_connmark: reject invalid shift parameters
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc
In sof_ipc3_control_update(), the expected_size calculation uses
firmware-provided cdata->num_elems in arithmetic that could overflow
on 32-bit platforms, wrapping to a small value. This would allow the
cdata->rhdr.hdr.size comparison to pass with mismatched sizes,
potentially leading to out-of-bounds access in snd_sof_update_control.
Use check_mul_overflow() and check_add_overflow() to detect and reject
overflowed size calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/core: Avoid enabling BRS from the SVM reload path
Branch Sampling (BRS) and Last Branch Record (LBR) are mutually
exclusive hardware features, and users of both are tracked via
cpuc->lbr_users.
When SVM is toggled on a CPU, the host perf events are reprogrammed to
update the HostOnly filter bit (set when virtualization is enabled,
cleared when it is disabled). On PerfMonV2-capable processors, this
reprogramming is performed by calling amd_pmu_enable_all() to rewrite
the event selectors. However, amd_pmu_enable_all() also calls
amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0.
Having active LBR events satisfies this gating on processors that have
LBR but not BRS. The kernel then tries to set the BRS enable bit in
DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such
hardware, the write results in a #GP:
Call Trace:
<IRQ>
amd_pmu_enable_all+0x1d/0x90
amd_pmu_disable_virt+0x62/0xb0
kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm]
hardware_disable_nolock+0x1a/0x30 [kvm]
__flush_smp_call_function_queue+0x9b/0x410
__sysvec_call_function+0x18/0xc0
sysvec_call_function+0x69/0x90
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
RIP: 0010:cpuidle_enter_state+0xc4/0x450
? cpuidle_enter_state+0xb7/0x450
cpuidle_enter+0x29/0x40
cpuidle_idle_call+0xf5/0x160
do_idle+0x7b/0xe0
cpu_startup_entry+0x26/0x30
start_secondary+0x115/0x140
secondary_startup_64_no_verify+0x194/0x19b
</TASK>
Fix this by ensuring that BRS is not enabled from the event selector
reprogramming path even when cpuc->lbr_users > 0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: use dst in this direction when pushing IPIP header
When pushing the IPIP header, the route of the other direction is used
to calculate the headroom, use the route in this direction. Accessing
the other tuple to set the IP source and destination is fine because
this tuple does not provide such information to avoid storing redundant
information. However, this tuple already provides the dst for this
direction, this went unnoticed because this bug affects headroom and
iph->frag_off only at this stage. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs
Ignore KVM's internal "service pending PV EOI" request if the vCPU has
disabled PV EOIs since the request was made. Asserting that PV EOIs are
enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e.
if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables
PV EOIs.
kernel BUG at arch/x86/kvm/lapic.c:3338!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0xb40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Modules linked in: kvm_intel kvm irqbypass
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: skip extent mft records in writeback to prevent deadlock
This patch fixes the ABBA deadlock between extent_lock and extent
mrec_lock triggered by xfstests generic/113, that occurs since the commit
6994acf33bae ("ntfs: use base mft_no when looking up base inode for
extent record").
Path A (inode writeback):
VFS writeback
-> ntfs_write_inode()
-> __ntfs_write_inode()
-> mutex_lock(&ni->extent_lock)
-> mutex_lock(&tni->mrec_lock)
Path B (MFT folio writeback):
VFS writeback of $MFT dirty folios
-> ntfs_mft_writepages()
-> ntfs_write_mft_block()
-> ntfs_may_write_mft_record()
-> holds one extent mrec_lock from a previous iteration
-> tries to acquire another base inode extent_lock
By removing all extent_lock and extent mrec_lock acquisition from the MFT
folio writeback path, the ABBA lock ordering is eliminated:
Path A: __ntfs_write_inode(): extent_lock -> mrec_lock
Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock
Path B is always redundant for extent records because:
1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio.
It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty
via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A.
Therefore, normal extent modifications never create a situation where
the MFT folio is dirty and Path B is not scheduled.
2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside
ntfs_mft_record_alloc(). But all identified callers in attrib.c
(ntfs_attr_add, ntfs_attr_record_move_away,
ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through
with mark_mft_record_dirty(), which triggers Path A to write the
complete record.
3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent
inodes, ensuring all dirty extents are flushed via Path A before the
base inode leaves the icache. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a
non-inline regular file with non-zero i_size and zero i_clusters is
structurally malformed: the extent map declares no allocated clusters yet
the size header claims content exists. Keep rejecting that shape, but
express it through a shared predicate so the same invariant is available
to normal inode reads and online filecheck.
The same zero-cluster shape is also malformed for non-inline directories.
ocfs2 directory growth allocates backing storage before advancing i_size,
and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches
i_size_read(inode). A forged directory dinode with a huge i_size and no
clusters would repeatedly fail on holes while advancing through the
claimed size.
Sparse regular files remain exempt: on sparse-alloc volumes, truncate can
legitimately grow i_size without allocating clusters. System inodes and
inline-data dinodes also retain their separate storage rules.
Mirror the check in ocfs2_filecheck_validate_inode_block() as well.
filecheck reports through its own error namespace, so malformed
size/cluster state is logged as a filecheck invalid-inode result rather
than via ocfs2_error(), but it must not proceed into
ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register bounds before narrowing retval range in check_mem_access()
When the BPF verifier processes a context load of an LSM hook return
value, it calls __mark_reg_s32_range() to narrow the register to the
hook's valid range. However, __mark_reg_s32_range() intersects the new
range with the register's existing bounds using max_t()/min_t() rather
than replacing them.
If the destination register carries stale bounds from a prior instruction
(e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than
reality. The verifier then believes it knows the register's exact value,
while at runtime the actual hook return value is loaded, creating a
verifier/runtime mismatch that can be used to bypass BPF memory safety
checks.
The else branch already calls mark_reg_unknown() to reset register state
before any narrowing. Apply the same reset in the is_retval path so
stale bounds are cleared before __mark_reg_s32_range() intersects. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
